LG 34um95p User Manual

ENGLISH
11asseMblInG anD PRePaRInG
adjusting the  angle
1  Place the monitor mounted on the stand base 
in an upright position. 
2  Adjust the angle of the screen. The angle of 
the screen can be adjusted forward or back-
ward from -5° to 15° for a comfortable  
viewing experience.
-5
15
front
Rear
  
y When you adjust the angle, do not hold the 
stand as shown on the following illustration. 
You may injure your fingers.
-5
15
 
y Be careful not to touch or press the screen 
area when adjusting the angle...

ENGLISH
12asseMblInG anD PRePaRInG
Installing on the Wall
Install the monitor at least 10 cm away from the 
wall and leave about 10 cm of space at each side 
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from 
your local retail store. Alternatively, please refer 
to the manual for how to install and set up a tilting 
wall mounting bracket.
10 cm 
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the...

ENGLISH
13asseMblInG anD PRePaRInG
Vesa (a x b)100 x 100
stand screwM4
Required screws4
Wall Mount Plate(optional)RW120
 yVESA (A x B)
AB
 
y Unplug the power cord before moving or install
-
ing the monitor to avoid electric shock.
 
y Installing the monitor on the ceiling or on a 
slanted wall may result in the monitor falling off, 
which could lead to injury. Use an authorized LG 
wall mount and contact the local dealer or quali
-
fied personnel.
 
y Applying excessive force when tightening 
screws may...

ENGLISH
14asseMblInG anD PRePaRInG
Using the Kensington lock
The connector for the Kensington security system 
is located at the back of the monitor.
For more information on installation and usage, 
refer to the Kensington lock owner's manual or visit 
the website at http://www.kensington.com.
Connect the monitor to a table using the Kensing-
ton security system cable.
 
y The Kensington security system is optional. 
You can obtain optional accessories from most 
electronics stores.
noTe  

ENGLISH
15UsInG THe MonIToR
UsInG THe MonIToR
 yThe following instructions are based on the 
34UM95-PD model. Illustrations in this manual 
may differ from the actual product.
Press the joystick button, go to Menu → Easy con-
trol → Input, and then select the input option.
 
y Do not press the screen for a prolonged time. 
This may cause image distortion.
 
y Do not display a still image on the screen 
for a prolonged time. This may cause image 
retention. Use a screensaver if possible.
CaUTIon
 
y When...

ENGLISH
16UsInG THe MonIToR
DisplayPort Connection
Transmits digital video and audio signals from your 
PC to the monitor. Connect the monitor to your PC 
using the display port cable as shown in the illus-
tration below:
DC-IN(19 V      )DP INHDM I IN 1H/PUSB UPUSB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
HDMIIN
2
DC-IN(19 V       )DP INHDMI IN 1H/PUSB UP
HDM I IN
2USB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
DC-IN(19 V      )DP INHDMI IN 1H/PUSB UP...

ENGLISH
17UsInG THe MonIToR
Connecting aV Devices
HDMI Connection
HDMI transmits digital video and audio signals 
from your AV device to the monitor. Connect your 
AV device to the monitor using the HDMI cable as 
shown in the illustration below.
DC-IN(19 V       )DP INHDM I IN 1H/PUSB UPUSB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
HDMIIN
2
DC-IN(19 V       )DP INHDMI IN 1H/PUSB UP
HDM I IN
2USB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
DC-IN(19 V...

ENGLISH
18UsInG THe MonIToR
HDMI/DP (DisplayPort) connection
To use USB 3.0, connect the A-B type USB 3.0 
cable of the product to the PC.
Peripheral devices connected to the USB IN port 
can be controlled from the PC.
DC-IN(19 V      )DP INHDM I IN 1H/PUSB UPUSB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
HDMIIN
2
DC-IN(19 V       )DP INHDMI IN 1H/PUSB UP
HDM I IN
2USB IN 15 V       1.1  AUSB IN 25 V       0.5 AUSB IN 35 V       0.5 A
DC-IN(19 V      )DP INHDMI IN 1H/PUSB UP
HDMI...

ENGLISH
19InsTallInG THe lG MonIT oR sofTWaRe
InsTallInG THe lG MonIT oR sofTWaRe
Insert the software CD included in the product packaging into your PC's \
CD drive and install the LG Monitor 
Software.
1  Set up Internet Explorer as the default web 
browser.
2  Click lG Monitor software on the CD's main 
screen. When the file download window ap-
pears, click Run. (Although the screen below 
may differ depending on your operating sys-
tem or Internet Explorer version, the installa-
tion methods...

ENGLISH
20InsTallInG THe lG MonIT oR sofTWaRe
 
y screen split This program automatically splits 
the program window as desired.
 
y True Color 
finder  This program calibrates the 
precise color output of the monitor to suit your 
needs.
noTe
6  The LG Monitor Software starts the installation 
as shown below:
7  If the ASM driver has not been installed, the 
driver will be installed automatically.
8  If the TUSB3410 driver has not been installed, 
the driver will be installed automatically. Select...