LG 34um95p Manual

							ENGLISH
21InsTallInG THe lG MonIT oR sofTWaRe
  
y When you run the True Color Finder software, 
the True Color Finder icon [
] appears in 
the system tray at the right bottom of the PC 
screen.
 
y Right-click the True Color Finder icon and 
select start Program to start the program.
noTe
 
y Once you have completed the monitor cali
-
bration with the True Color Finder software, 
remove the calibrator from the monitor and 
store it at room temperature away from direct 
sunlight or put it in the box.  
- If the calibrator's measuring part is exposed 
to direct sunlight for a long time, this may 
cause damage to the calibrator. 
- Do not store it in an environment with too 
low/high temperature and high humidity.
 
y If any third-party calibration application is al
-
ready installed on your PC, the image quality 
may be affected by a conflict between the two 
applications. For the best performance, it is 
recommended to uninstall the other calibration 
application.
CaUTIon
  
y To use the True Color Finder function, you 
must purchase the supported calibrator.
 
y For details on supported calibrators and 
graphic cards, see the True Color Finder user 
guide.
 
y If you have changed the input port, it is recom-
mend that you calibrate the monitor's picture 
quality again.
noTe
  
y When you run Screen Split, the Screen Split 
icon [
] appears in the system tray at the 
bottom right of the PC screen. 
 
y Right-click the Screen Split icon and select the 
desired layout.
noTe  
						

							ENGLISH
22UseR seTTInGs
UseR seTTInGs
activating the Main Menu
1   Press the joystick button on the bottom of the monitor.
2   Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3   Press the joystick button once more to exit the main menu.
Joystick 
button
buttonMenu statusDescription
Main menu disabledEnables the main menu. 
Main menu enabledExits the main menu.(Holding down the button to turn off the monitor: You can turn off the monitor this way at any time, including when the OSD is on)
◄
Main menu disabledAdjusts the monitor volume level.
Main menu enabledEnters the menu features.
►
Main menu disabledAdjusts the monitor volume level.
Main menu enabledEnters the PBP feature.
▲
Main menu disabledEnables the main menu.
Main menu enabledEnters the reader feature.
▼
Main menu disabledEnables the main menu.
Main menu enabledTurns off the monitor.
 
Main Menu features
Reader
Menu PbP
Monitor off exit
 long press: Monitor off
Main MenuDescription
MenuConfigures the screen settings.
ReaderAdjusts color for comfortable text file reading.
PbPDisplays the screens of two input modes on one monitor.
Monitor offTurns off the monitor.
exitExits the main menu.  
						

							ENGLISH
23UseR seTTInGs
User settings
Menu settings
1   To view the osD menu, press the joystick button at the bottom of the monitor and then enter the 
Menu.
2   Configure the options by moving the joystick up/down/left/right.
3   To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4   If you want to exit the OSD menu, move the joystick to ◄ until you exit. 
 yWhen you enter the menu, instructions on how to use the button will appe\
ar in the bottom right corner 
of the screen.
easy controlfunctionPbPscreensettingsReset
Each option is described below.
MenuDescription
easy controlbrightnessAdjusts the color contrast and brightness of the screen.Contrast
VolumeAdjusts the volume level.
 
y You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume 
menu.
noTe
InputSelects the input mode.
RatioAdjusts the aspect ratio of the screen.
functionAdjusts Super Energy Saving, Calibration and Picture Modes.
PbPPbPDisplays the screens of two input modes on one monitor.
screenPictureAdjusts the Sharpness, Black level and Response Time of the screen.
ColorAdjusts Gamma, Color Temperature, Red, Green, Blue and Six Color.
settingsAdjusts Language, Power LED, Automatic Standby, DisplayPort 1.2 and OSD Lock.
ResetRestores the default settings.
◄exitExits the OSD menu.  
						

							ENGLISH
24UseR seTTInGs
Ratio
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to easy control > Ratio by moving the joystick.
3   Configure the options following the instructions that appear 
in the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > easy control > RatioDescription
WideDisplays the video in widescreen, regardless of the video signal input.
originalDisplays video according to the aspect ratio of the video signal input.
Cinema 1Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema 2Enlarges the screen with an aspect ratio of 21:9, including the black bo\
x at the bottom for subtitles. (at 1080p)
1:1The aspect ratio is not adjusted from the original.
 
y The display may look the same for Wide, Original, and 1:1 options at the\
 recommended resolution 
(3440 x 1440). 
 
y The ratio is disabled in the interlaced signal.
noTe
easy control
easy control brightness100>
Contrast70>
function
Volume30>
Input
HDMI>
PbPRatio
Wide>
screen
settings
Reset
▲/▼: Move
 / ►: OK ◄: Back  
						

							ENGLISH
25UseR seTTInGs
function
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to function by moving the joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > functionDescription
super energy  savingHighSaves energy using the high-efficiency Super Energy Saving feature.
lowSaves energy using the low-efficiency Super Energy Saving feature.
offDisables the Super Energy Saving feature.
CalibrationonEnables the calibration applied to the monitor.
offIf it is set to Off, the monitor reverts back to the picture quality set before calibra-tion.
 
y Run the True Color Finder program.
noTe
Picture ModeCustomAllows the user to adjust settings. You can adjust the color mode of the main menu.
PhotoOptimizes the screen for photos.
CinemaOptimizes the screen for videos.
GameOptimizes the screen for games. 
function
easy control super energy saving
low>
Calibration off>
functionPicture Mode
Custom>
PbP
screen
settings
Reset
▲/▼: Move
 / ►: OK ◄: Back  
						

							ENGLISH
26UseR seTTInGs
PbP
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to PbP by movingthe joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > PbPDescription
PbPDisplays the screens of two input modes on one monitor.
PbP Connectionsub screen (Right)
HDMI 1HDMI 2DisplayPortThunderbolt ()
Main screen(left)
HDMI 1-OXX
HDMI 2O-XX
DisplayPortOO-X
Thunderbolt ()OOX-
InputMainSelects the video signal input of the main screen.
subSelects the video signal input of the sub screen.
audioChanges the audio output in PBP mode. 
swapToggles between the main screen and sub screen in PBP mode.
sub fullConverts the sub screen in PBP mode to wide screen.
RatioAdjusts the aspect ratio of the main screen or sub screen.
MainWideDisplays the video to fit the PBP screen, regardless of the video signal input. 
originalDisplays the video in the aspect ratio of the video signal input on the PBP screen.
subWideDisplays the video to fit the PBP screen, regardless of the video signal input.
originalDisplays the video in the aspect ratio of the video signal input on the PBP screen.
 
y When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The  
Main/Sub options for Ratio become disabled if there is no signal.
noTe
PbP
easy control PbP
off>
Input>
functionaudio
HDMI1>
swap
PbPsub fullRatio>
screen
settings
Reset PbP Preview
HDMI1
▲/▼: Move / ►: OK◄: Back  
						

							ENGLISH
27UseR seTTInGs
Picture
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to screen > Picture by moving the joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > screen > PictureDescription
sharpnessAdjusts the sharpness of the screen.
black levelSets the offset level (for HDMI only).• 	offset: as a reference for a video signal, this is the darkest color the monit\
or can dis-play.
HighThe picture of the screen gets brighter.
lowThe picture of the screen gets darker.
Response TimeSets a response time for displayed pictures based on the speed of the sc\
reen. For a nor-mal environment, it is recommended that you use Middle. For a fast-movin\
g picture, it is recommended that you use High.Setting to High may cause image sticking.
HighSets the response time to High.
MiddleSets the response time to Middle.
lowSets the response time to Low.
offDoes not use the response time improvement feature.
screen
easy controlPicture>
Color>
function
PbP
screen
settings
Reset
▲/▼: Move
 / ►: OK ◄: Back  
						

							ENGLISH
28UseR seTTInGs
Color
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to screen > Color by moving the joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > screen > ColorDescription
GammaCustom gamma settings: When using the gamma 0, gamma 1 and gamma 2 monit\
or set-tings, higher gamma settings mean a brighter image is displayed and vice\
 versa.
Color TempCustomSelects the factory default picture color.
WarmSets the screen color to a reddish tone.
MediumSets the screen color to between a red and blue tone. 
CoolSets the screen color to a bluish tone.
RedYou can customize the picture color using Red, Green and Blue colors.
Green
blue
six ColorsMeets the user requirements for colors by adjusting the tone and saturat\
ion of the six colors (red, green, blue, cyan, magenta and yellow) and then saving the setti\
ngs.
HueAdjusts the tone of the screen colors.
saturationAdjusts the saturation of the screen colors. The lower the value, the less satu-rated and brighter the colors become. The higher the value, the more saturated and darker the colors become.
ResetReturns color to the default settings.
screen
easy controlPicture>
Color>
function
PbP
screen
settings
Reset
▲/▼: Move
 / ►: OK ◄: Back  
						

							ENGLISH
29UseR seTTInGs
settings
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to settings by moving the joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > settingsDescription
languageSets the menu screen to the desired language.
Power leDTurns the power LED on the front of the monitor on or off.
onThe power LED turns on automatically.
offThe power LED turns off.
automatic   standbyFeature that automatically turns off the monitor when there is no movement on the screen for a period of time.
DisplayPort 1.2Enables or disables DisplayPort 1.2.
 
y Be sure to configure this option according to the DisplayPort version su\
pported by your 
graphics card. Set this option to 
Disable if your graphics card does not support DisplayPort 
1.2.
 
y In order to use 10 bit color in 3440 X 1440 @ 60 Hz, must be set to 
enable DisplayPort 1.2.
noTe
enableEnables DisplayPort 1.2 
DisableDisables DisplayPort 1.2 
osD lockPrevents incorrect key input.
onDisables key input
offEnables key input
 
y All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings 
and the Exit button.
noTe
settings
easy control language
english>
Power leD on>
functionautomatic 
standby
off>
DisplayPort 1.2
Disable>
PbPosD lock
off>
screen
settings
Reset
▲/▼: Move
/ ►: OK ◄: Back  
						

							ENGLISH
30UseR seTTInGs
Reset
1   To view the osD menu, press the joystick button at the 
bottom of the monitor and then enter the Menu.
2   Go to Reset by moving the joystick.
3   Configure the options following the instructions that appear in 
the bottom right corner.
4   To return to the upper menu or set other menu items, move 
the joystick to ◄ or pressing ( / OK) it.
5   If you want to exit the OSD menu, move the joystick to ◄ 
until you exit.
Each option is described below.
Menu > ResetDescription
Do you want to reset your settings? 
ResetRestores the default settings.
CancelCancel the reset.
Reset
easy controlDo you want to reset your settings?
Reset
function
Cancel
PbP
screen
settings
Reset
▲/▼:	Move
/	►:	OK ◄:	Back