LG 32lk551 Owners Manual

							31
ENGENGLISH
WATCHING TV
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
4 Press the Navigation buttons to scroll to 
Cable and press OK.
5 Press the Navigation buttons to scroll to 
Comhem or Other Operators and press OK.
6 Press the Navigation buttons to scroll to 
Quick or Full and press OK.
7 Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments 
(Except for Full mode) and press OK.
8 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
9 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Selecting Cable,
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 yWhen you select the Cable, the Cable 
Service Operator selection screen can differ 
or not exist by the Cable situation of the ap-
plicable country.
 yThe popup window to select Service Opera-
tor is only shown initially for the 3 cases 
when you accessing the Initial Setting 
menu, when you change from Antenna to 
Cable or when you access the menu after 
changing the Country.
 yWhen you want to select Service Operator 
aside from the above 3 cases, you can do so 
by selecting Setup->Cable DTV Setting-> 
Service Operator.
 yAcquired certification SO : Sweden(Comhem, Canal Dig-ital), Denmark(YouSee, Canal Dig-ital, Stofa), Norway(Canal Digital), Netherlands(Ziggo, UPC Digitaal), Ukraine(Volia-Cable), Germany(KDG), Switzerland(CableCom, UPC), Austria(UPC Digital), Hungary(UPC Dig-ital), Ireland(UPC Digital), Poland(UPC Digital), Romania(UPC Digital), Russia(OnLime)(The acquired certifica-tion SO can be added.) yIf there are not any Service Operator that you want, select Other Operators. yIf you select “Other Operators”, or the selected country supports “Other Operators” only, it may take some time to search all the channels, or it may not search some of the channels. yIf some of the channels do not appear, follow the steps below:1. SETUP -> Auto Tuning -> Cable -> Set-ting2. Switch Home Tuning  from "Off" to "On"3. Input additional values such as the frequen-cy, symbol rate, modulation, and network ID. (You can ask your cable service provider for the above information.)
The following values are needed in order to search all available programmes quickly and correctly.The commonly used values are provided as "default".However, for correct settings, please inquire of the cable service provider.When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels.In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full.However, in the case when the programme is searched by selecting the Full, the Auto Tun-ing time can be taken too much. If some channels are not detected when Full is selected, select the In detail checkbox and then try tuning again.• Frequency : Enter a user-defined fre-quency.• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel).• Modulation : Enter a user-defined modula-tion. (Modulation: Loading of audio or video signals onto carrier).• Network ID : Unique identifier allocated for each user.• Start Frequency : Enter a user-defined start frequency range.• End Frequency : Enter a user-defined end frequency range.
  
						

							32
ENGENGLISH
WATCHING TV
Cable DTV Setting (In Cable mode 
only)
The range that a user can select from the Service 
Operator menu differs depending on number of 
Service Operator supported by each country, and 
if number of supported Service Operator for each 
country is 1, corresponding function becomes non-
activation.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to Cable 
DTV Setting and press OK.
4 Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and 
press OK.
5 Select your desired Source.
6 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
 y 
If you select Cable, you can see Cable 
DTV Setting menu.
 yWhen Channel Auto Update is On, you 
can update information for all the pro-
grammes that can be updated, including 
the programme currently being watched.
 yWhen Channel Auto Update is Off, 
you can only update information for the 
programme currently being watched.
 yYou can not select the Cable DTV Set-
ting when the service operator is set to 
"Ziggo".
Automatically setting up 
programme
(Only 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
4 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
5 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned.
 yThe number of programmes that you can store differs depending on the broadcasting signal environment.
 yIf you wish to keep on auto tuning select Start using the  button. Then, press the OK button. Otherwise select Close.
 yWhen select Italy in the Country menu, if the pop up is displayed when the conflicted programme after Auto Tuning, select a broadcaster for conflicting programme number to solve.
(Except for 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously 
stored service information will be deleted.
  
						

							33
ENGENGLISH
WATCHING TV
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the pro-gramme scanned. ySymbol rate : Enter a user-defined symbol rate (Sym-bol rate: Speed at which a device such as modem sends symbols to a channel). yModulation : Enter a user-defined modulation. (Modu-
lation: Loading of audio or video signals onto carrier). yYou can not select the Cable DTV when the service operator is set to "Ziggo" or "Other Operators" of Netherlands.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to SETUP and press OK.
3 Press the Navigation buttons to scroll to Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to DTV and press OK.
5 Scroll through the programme types, and then add or delete programmes.
6 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to SETUP and press OK.
3 Press the Navigation buttons to scroll to Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to Cable DTV and press OK.
5 Make appropriate adjustments.
6 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
Manually setting up programme (In 
digital mode)
Manual Tuning lets you manually add a pro-
gramme to your programme list.
Selecting Cable,
Selecting Antenna,
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. y You can select SBAND when the country is set to "Norway, Latvia."
(Except for 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
Manually setting up programme (In 
digital mode)
Manual Tuning lets you manually add a pro-
gramme to your programme list.
(Only 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to SETUP and press OK.
3 Press the Navigation buttons to scroll to Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to DTV and press OK.
5 Scroll through the programme types, and then add or delete programmes.
6 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. y You can select SBAND when the country is set to "Norway, Latvia."
Selecting DTV,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to SETUP and press OK.
3 Press the Navigation buttons to scroll to Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to Cable DTV and press OK.
5 Scroll through the programme types, and then add or delete programmes.
6 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. ySymbol rate : Enter a user-defined symbol rate (Sym-bol rate: Speed at which a device such as modem sends symbols to a channel). yModulation : Enter a user-defined modula-tion. (Modulation: Loading of audio or video signals onto carrier).
Selecting Cable DTV,
  
						

							34
ENGENGLISH
WATCHING TV
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 y L : SECAM L/L’ (France)
 y  BG : PAL B/G, SECAM B/G (Europe / East 
Europe / Asia / New Zealand / M.East / 
Africa)
 y 
I : PAL I (U.K. / Ireland / Hong Kong / South 
Africa)
 y DK : PAL D/K, SECAM D/K (East Europe / 
China / Africa / CIS)
 y 
To store another channel, repeat steps 5 to 
10.
Manually setting up programme (In 
analogue mode)
Manual Tuning lets you manually tune and arrange 
the stations in whatever order you desire. 
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to 
TV or Cable TV and press OK.
5 Scroll through the programme types, and then 
add or delete programmes.
6 Press the Navigation buttons to scroll to 
TV System.
7 Press the Navigation buttons to scroll to 
V/UHF or Cable.
8 Press the Navigation buttons or Number but-
tons to scroll to the desired channel number.
9 Press the Navigation buttons to scroll to 
commence searching.
10 Press the Navigation buttons to scroll to 
Store and press OK.
11  When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Assigning a station name
You can assign a station name with five characters 
to each programme number.
1  Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to 
TV or Cable TV.
5 Press the Navigation buttons to scroll to 
Name and press OK.
6 Press the Navigation buttons to scroll Select 
the position and make your choice of the sec-
ond character, and so on. You can use an the 
alphabet A to Z, the number 0 to 9, +/ -, and 
blank and press OK.
7 Press the Navigation buttons to scroll to 
Close and press OK.
8 Press the Navigation buttons to scroll to 
Store and press OK
9 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
  
						

							35
ENGENGLISH
WATCHING TV
Editing your programme list
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Programme Edit and press OK.
4 Press the Navigation buttons to select a 
programme to be stored or skipped.
5 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Fine Tuning
Normally fine tuning is only necessary if reception 
is poor.
When a programme number is skipped, it means 
that you will be unable to select it using P ^, v but-
ton during TV viewing. 
If you wish to select the skipped programme, 
directly enter the programme number with the 
NUMBER buttons or select it in the Programme 
edit menu.
This function enables you to skip the stored pro-
grammes.
You can change the programme number us-
ing “Move”function, if “Automatic Numbering” is 
unchecked when you start Auto Tuning. (Except for 
22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 
32/37/42/47LV355C)
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
4 Press the Navigation buttons to scroll to 
TV or Cable TV.
5 Press the Navigation buttons to scroll to 
Fine.
6 Fine tune for the best picture and sound.
7 Press the Navigation buttons to scroll to 
Store and press OK
8 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Booster
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Booster and press OK.
4 Select On or Off.
If reception is poor select Booster to On.
When the signal is strong, select Off.
(Depending on model)
  
						

							36
ENGENGLISH
WATCHING TV
In TV mode
1 Press the Navigation buttons to scroll to select 
a programme number to be deleted.
2 Press Red button  to turn the programme 
number.
NOTE
 yThe selected programme is deleted, all the 
following programmes are shifted up one.
Deleting a programme
1 Press the Navigation buttons to scroll to select 
a programme number to be moved.
2 Press the Green button to turn the programme 
number and press the Navigation buttons.
3 Press Green button to release.
Moving a programme
In DTV/RADIO mode
1 Press the Navigation buttons to scroll to select 
a programme number to be skipped.
2 Press Blue button to turn the programme 
number.
3 Press Blue button to release.
NOTE
 yWhen programmes are to be skipped, the 
skipped programme shows in blue and these 
programmes will not be selected by the P ^ 
or v  buttons during TV viewing.
 yIf you wish to select a skipped programme, 
directly enter the programme number with 
the NUMBER buttons or select it in the pro-
gramme edit or EPG.
Skipping a programme number
1 Press the Navigation buttons to scroll to select 
a programme number to be locked.
2 Press Yellow button  to turn the programme 
number.
3 Press Yellow button  to release.
NOTE
 yIt can be registered as Lock programme 
even when Lock System is turned Off.
Locking a programme number
1 Press the Navigation buttons to scroll to select 
a programme number to be skipped.
2 Press Blue button to turn the programme 
number.
3 Press Blue button to release.
NOTE
 yWhen programmes are to be skipped, the 
skipped programme shows in blue and these 
programmes will not be selected by the P 
  buttons during TV viewing.
 yIf you wish to select a skipped programme, 
directly enter the programme number with 
the NUMBER buttons or select it in the pro-
gramme edit.
Skipping a programme number
(Except for 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
  
						

							37
ENGENGLISH
WATCHING TV
CI [Common interface] Information 
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to CI 
Information and press OK.
4 Select the desired item: Module information, 
smart card information, language, or software 
download etc and press OK.
5 When you are finished, press EXIT.
This function enables you to watch some encrypt-
ed services (pay services). If you remove the CI 
Module, you cannot watch pay services.
When the module is inserted into the CI slot, you 
can access the module menu.
To purchase a module and smart card, contact 
your dealer. Do not repeatedly insert or remove a 
CI module from the TV. This may cause a malfunc-
tion. When the TV is turned on after inserting a CI 
Module, you may not have any sound output.
This may be incompatible with the CI module and 
smart card.
CI (Common Interface) functions may not be pos-
sible depending upon the country broadcasting 
circumstances.
When using a CAM(Conditional Access Module), 
please make sure it meets fully the requirements 
of either DVB-CI or CI plus. 
1 Press the Navigation buttons to scroll to select 
a programme number to be locked.
2 Press Yellow button  to turn the programme 
number.
3 Press Yellow button  to release.
NOTE
 yIt can be registered as Lock programme 
even when Lock System is turned Off.
Locking a programme number
1 Press the Navigation buttons  to start Auto Sort 
and press OK.
NOTE
 yAfter activating Auto Sort once, you can no 
longer edit programmes.
Auto Sort
(Except for 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)
1 Press the Navigation buttons to scroll to select 
your desired programme.
2 Press the FAV to add corresponding 
programme to Favourite list of current Favourite 
group.
3 Press FAV to release.
Selecting favourite programme
1 Press the Navigation buttons to scroll to select 
your desired programme.
2 Press the Q.MENU to display a pop-up window 
where Favourite group can be changed. 
3 Press the Navigation buttons to scroll to select 
a Favourite group and press OK.
Selecting favourite programme group
NOTE
 yThis OSD is only for illustration and the menu 
options and screen format will vary according 
to the Digital pay services provider. 
 yIt is possible for you to change CI (Common 
Interface) menu screen and service by 
consulting your dealer.
 yThis feature is not available in all countries.
  
						

							38
ENGENGLISH
WATCHING TV
Selecting the programme list 
1 Press Navigation buttons to  select pro-
gramme.
2 Press OK to switch to the chosen programme 
number.
You can check which programmes are stored in 
the memory by displaying the programme list.
Displaying programme LIST
1 Press LIST to access the Programme List.
2 Press Blue button to turn the programme edit.
NOTE
 yYou may find some blue programmes. These 
have been set up to be skipped by auto pro-
gramming or in the programme edit mode.
 ySome programmes with the channel number 
shown in the programme LIST indicate there 
is no station name assigned.
Selecting a programme in the programme list
NOTE
 yPress TV/RAD. (The mode will be switched 
between TV, DTV, and Radio from the 
programme you are currently watching.)
Paging through a programme list
Displaying the favourite programme list
1 Press the P  buttons to turn the pages.
2 Press LIST  to  return normal TV viewing.
1 Press FAV to access the Favourite Programme 
List.
2 When you are finished, press EXIT.
ButtonDescription
Blue buttonTurn the programme edit.
YellowbuttonCurrent channel is registered/cancelled as preferred channel oncurrently selected Group.
OKSelects a programme to view
< or >Favourite group is changed.
  
						

							39
ENGENGLISH
WATCHING TV
EPG (Electronic Programme 
Guide) (In digital mode)
This system has an Electronic Programme Guide 
(EPG) to help your navigation through all the pos-
sible viewing options.
The EPG supplies information such as programme 
listings, start and end times for all available services. 
In addition, detailed information about the pro-
gramme is often available in the EPG (the availability 
and amount of these programme details will vary, 
depending on the particular broadcaster).
This function can be used only when the EPG 
information is broadcast by broadcasting companies.
You must set the Clock in the Time menu, before 
using EPG function.
The EPG displays the programme details for 8 
days.
DTV 1  TV ONE
Good Morning
21:00          00:00Show/Game Show
►Watch► NextPr. Change►
16:9HE-AAC720p...
▼UpDown
Sarah  Bradley,  Steve  Gray  and  Brendon  Pongia  present  the latest in fashion, the arts, entertainment, lifestyle and cooking, with regular and special guests.Sarah  Bradley,  Steve  Gray  and  Brendon  Pongia  present  the latest in fashion, the arts, entertainment, lifestyle and cooking, with regular and special guests.
 yPress INFO to show current programme 
information.
Displayed with a TV or DTV Programme.
Displayed with a Radio Programme.
Displayed with a MHEG Programme.
HE-AACCDisplayed with a HE-AAC Programme.  
Aspect ratio of broadcasting programme.
Aspect ratio of broadcasting programme.
Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
Displayed with a Scramble Programme.
Displayed with a Dolby Digital Programme.
Displayed with a Dolby Digital PLUS Programme.
576i/p, 720p, 1080i/p :  Resolution of broadcasting programmeBroadcasted programme with the icon may 
not be displayed in Monitor Out depending on the information of the programme.
>Shows next programme information.ꕍ or ꕌShows other programme information.
Tyra
2 TV228 Sep. 2008 21:00~00:00
CloseRemindRecord
Programme Guide
ALLNOWNEXT
1  YLE TV1 Keno World Business2  YLE TV24  TV.. Your World Today Fantomen  Legenen om Den.... Kritiskt Naturtimmen ABC Lyssna5  YLE FST6  CNN▼
▲
That ’70s show
DTV  1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
RADIOWatch/ScheduleTV/RADFavouriteFAV
Manual TimerSchedule List
i   InformationINFO
Mode
That ’70s show
Switch on/off EPG
1  Press GUIDE to switch on or off EPG.
Select a programme
1 Press Navigation buttons or P  to select 
desired programme.
OKA pop-up window for record/remind settings appear.
Select Timer Record/Remind setting mode.
OKA pop-up window for remind settings appear.
< >Select Timer Remind setting mode.
or
YesNo
Do you want to set a reminder for the selected programme??
Bob The Builder SpecialDTV 1 ABC TV Sydney28 Sep. 2008 21:00~00:00
(Only Plasma TV)
(Only LCD TV/LED LCD TV)
  
						

							40
ENGENGLISH
WATCHING TV
NOW/NEXT Guide Mode
You can view a programme being broadcasted and 
one scheduled to follow.
ButtonDescription
Red buttonChange EPG mode.
Yellow buttonEnter Manual Timer mode.
Blue buttonEnter Schedule List mode.
OK
When ‘Now’ is selected, it is moved to selected programme and EPG disap-pearsWhen ‘Next’ is selected, a reservation pop-up window appears.
<  >Select NOW or NEXT Programme.
Select the Broadcast Programme.
P Page Up/Down.
GUIDE
Switch off EPG.BACK
EXIT
TV/RADSelect DTV or RADIO Programme.
INFODetail information on or off.
Extended Description Box
ButtonDescription
INFOThe detail information on or off.
Text Up/Down.
<  >Select Timer Record/Remind setting mode.
GUIDESwitch off EPG.EXIT
Date Change Mode
ButtonDescription
Green button
Switch off Date setting mode.ꕍ
BACK
OKChange to the selected date.
<  >Select a date.
GUIDESwitch off EPG.EXIT
Record/Remind Setting Mode
(Only Plasma TV)
Sets a start or end time, programme for recording, 
and sets a start time, programme for the reminder 
with the end time grayed out.
This function is available only when recording 
equipment that use pin8 recording signalling has 
been connected to the TV-OUT(AV1) terminal, us-
ing a SCART cable.
Recording function is only supported in the Digital 
mode and not in the Analogue mode.
ButtonDescription
BACKSwitch off Manual Timer mode.
Yellow buttonChange to Guide mode.
Blue buttonChange to Schedule List mode.
OKSave Timer Record/Remind.
<  >Select Type, Start Time, End Time or Programme.
Select Remind or Record function setting.
8 Day Guide Mode
ButtonDescription
Red buttonChange EPG mode.
Green buttonEnter Date setting mode.
Yellow buttonEnter Manual Timer mode.
Blue buttonEnter Schedule List mode.
OK
When ‘Currently broadcasting pro-gramme is selected, it is moved to se-lected programme and EPG disappearsWhen ‘Future broadcasting programme is selected, a reservation pop-up window appears.
<  >Select Programme.
Select the Broadcast Programme.
P Page Up/Down.
GUIDE
Switch off EPG.BACK
EXIT
TV/RADSelect DTV or RADIO Programme.
INFODetail information on or off.
Remind Setting Mode
(Only LCD TV/LED LCD TV)
ButtonDescription
BACKSwitch off Manual Timer mode.
OKAppear Repeat Option  popup.
Navigation buttonSelect the date to schedule.
Yellow buttonChange to Guide mode.
Blue buttonChange to Schedule List mode.
or