LG 32lk451 Owners Manual

							71
ENGENGLISH
CUSTOMIZING SETTINGS
Advanced image options (Depending on model)
SettingDescription
Colour TemperatureAdjusts the overall color of the screen by changing the white baseline.
Plasma TV a. Method : 2 Points yPattern: Inner, Outer yRed/Green/Blue Contrast, Red/Green/Blue Bright-ness: The adjust-ment range is -50 to +50.
b. Method : 20 Point IRE y  
IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting. y 
Red/Green/Blue: The adjustment range is -50 - +50.c. Apply to all inputs
LCD/LED LCD TVb. Method : 10 Point IRE y 
Pattern: Inner, Outer y  
IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting. y  
Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE. y 
Red/Green/Blue: The adjustment range is -50 - +50.
c. Apply to all inputs
Colour Management SystemAs the tool used by the experts to make adjustments by using the test pa\
tterns, this does not affect other colours but can be used to selectively adjust the 6 colour ar\
eas (Red/Green/Blue/Cyan/Magenta/Yellow).Colour difference may not be distinctive even when you make the adjustments for th\
e general video.Adjusts Red/Green/Blue/Yellow/Cyan, Magenta. 
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 - +30. 
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30. 
This feature is disable in RGB-PC and HDMI-PC mode.
  
						

							72
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
Auto VolumeActivates the Auto Volume feature to keep the volume level consistent whenever you change channels. The volume level may not be consistent due to different signal conditions of broadcasting stations.
Clear Voice Sets whether to enhance human voice clarity. You can adjust the level of clarity when you set this feature on.
 
y If you select “On” for Clear Voice II
, Infinite Surround  feature will not work.
 
y Select levels from ‘-6’ to ’+6’.
NOTE
BalanceAdjust balance between the left and right speakers according to your roo\
m environment.
Sound ModeSelects one of the preset sound modes or customizes options in each mode\
.
Mode
StandardSelect when you want standard-quality sound.
MusicSelect when you listen to music.
CinemaSelect when you watch movies.
SportSelect when you watch sports events.
GameSelect when you play games.
Option
Infinite Surround Infinite Surround  is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeak\
ers.
TrebleControls the dominant sounds in the output. When you turn up the treble,\
 it will increase the output to the higher frequency range.
BassControls the softer sounds in the output. When you turn up the bass, it \
will increase the output to the lower frequency range.
ResetResets the sound mode to the default setting.
AUDIO settings
1 
Press Home to access the main menus.
2 Press the Navigation buttons to scroll to AUDIO and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want 
and press OK.
- To return to the previous level, press BACK.
4  When you are finished, press EXIT.
AUDIOOKMove● Auto Volume        : Off● Clear Voice II       : Off     3● Balance               0● Sound Mode        : Standard                             • Infinite Surround       : Off                             • Treble             50                             • Bass             50                             • Reset● Digital Audio Out  : PCM● TV Speaker         : On● DTV Audio Setting : Auto
LR
The available audio settings are described in the following.
 yImage shown may differ from your TV.
  
						

							73
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
Digital Audio OutThis function allows you to select your preferred Digital Audio Output.When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(SonyPhilips Digital InterFace) output to Dolby Digital.If Auto is selected in the digital audio out menu when Dolby Digital is not\
 available, SPDIF output will be PCM(Pulse-code modulation).Even if both Dolby Digital and Audio language have been set in a channel which broadcast DolbyDigital Audio, only Dolby Digital will be played.
ItemAudio InputDigital Audio output
AutoMPEGDolby DigitalDolby Digital PlusHE-AAC
PCMDolby DigitalDolby DigitalDolby Digital
PCMAllPCM
TV SpeakerTurns on the internal speaker of the TV when using an external Hi-Fi system. You can use the TV speaker as an audio output device even if there is no video input.
 
y When the TV speaker  is turned off while the Simplink home theater is operating, the sound  
  output automatically switches to the Home theater speaker, but when the TV speaker is  
  turned on, the sound output the  TV speaker.
 
y Some menus in 
AUDIO are disabled wh en TV Speaker is set to  Off.
NOTE
DTV Audio Setting(In Dig-ital Mode only)
When different audio types exist in an input signal, this function allows you to\
 select the audio typeyou want.
Mode
AutoAutomatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital > MPEG.(Except for Italy)Automatically outputs in the order HE-AAC > Dolby Digital+ > MPEG > Dolby Digital.(Only Italy)
HE-AAC, Dolby Digital+, Dolby Digital, MPEG
Allows users to select the audio type they want.ex) If MPEG is selected, MPEG is always outputted.      If MPEG is not supported, another audio type is set in that order.
See p.77 (Audio Language Selection)
  
						

							74
ENGENGLISH
CUSTOMIZING SETTINGS
Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appe\
ars with the programme
number and station name.
1 Press Q. MENU and press the Navigation to access the Audio or Audio Language and press OK.
2 Press the Navigation button to scroll to the sound output and press OK.
BroadcastOn Screen Display
MonoStereoDual
MONOSTEREODUAL I , DUAL II , DUAL I + II
Nicam Reception (In Analogue Mode Only)
Speaker Sound Output Selection
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (\
Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received\
.
1 When NICAM mono is received, you can select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or 
FM MONO.
In AV, Component, RGB and HDMI mode, you can select output sound for the left\
 and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R inp\
ut is 
sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
 yMono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono\
. In mono reception, the clarityof 
sound is improved.
 yLanguage selection for dual language broadcast
If a programme can be received in two languages (dual language), you c\
an switch to DUAL I,
DUAL II or DUAL I+II.
DUAL I     Sends the primary broadcast language to the loudspeakers.
DUAL I I  Sends the secondary broadcast language to the loudspeakers.
DUAL I+I I  Sends a separate language to each loudspeaker.
  
						

							75
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
ClockSets the time, date, time zone, and daylight-saving time feature.The time will be set automatically according to a digital channel signal\
 which includes time information provided by the broadcasting station. If not, set the time a\
nd date manually.
 
y The TV time is set by the time offset information based on Time Zone and GMT (Greenwich  
  Mean Time) which is received with the broadcast signal and the time is set au\
tomatically by  
  a digital signal.
 
y When if the city name in Time Zone is changed into offset, you can change time by 1 hour.
 
y Time Zone menu can be changed in 
Auto mode.
NOTE
This Table means the Time Zone table of 9 area of Russia, 
and when the user selects the Time Zone for his or her 
area, it automatically sets the time for the corresponding 
area.
However, even though the user selected his or her area, if 
the broadcasting station’s local time offset is not offered, or 
if the region information does not match, then the user may 
select the Offset from the Time Zone to set the correct time.
Time Zone
Magadan, Kamchatka
Vladivostok
Yakutsk
Irkutsk
Krasnoyarsk
Omsk 
Yekaterinburg
Moscow, Samara
Kaliningrad
TIME settings
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to TIME and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want 
and press OK.
- To return to the previous level, press BACK.
4  When you are finished, press EXIT. 
TIMEOKMove
● Clock● Off Time   : Off● On Time  : Off● Sleep Timer  : Off
The available time settings are described in the following.
 yImage shown may differ from your TV.
  
						

							76
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
Lock SystemActivates or deactivates the lock system.
Set PasswordChanges the 4-digit password. The default PIN is “0 0 0 0”.When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’.When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ .If you forget your password, press ‘0’, ‘3’,‘2’, ‘5\
’ on the remote control handset.
Block ProgrammeBlocks the programmes that contain inappropriate contents for children b\
y pressing the Green button. The Lock icon appears in front of the blocked programmes. The programmes can be selected but the screen blank and the audio is muted.To watch a locked channel, enter the password.
It is available to use this function in Lock System ”On”
Parental Guidance(In Digital Mode only)
This function operates according to information from the broadcasting st\
ation. Therefore if the signalhas incorrect information, this function does not operate.A password is required to gain access to this menu.This set is programmed to remember which option it was last set to even \
if you switch the set off.Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.Enter a password to watch a blocked programme.Rating differs by country.
Input BlockBlock the input sources.It is available to use this function in Lock System ”On”
Key LockLocks or unlocks the buttons on the TV.
LOCK settings
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to LOCK and press OK.
3 Press the Navigation buttons  to scroll to the setting or option you 
want and press OK.
- To return to the previous level, press BACK.
4  When you are finished, press EXIT.
LOCKOKMove
● Set Password● Lock System    : Off                                ● Block Programme                                ● Parental Guidance :  Blocking Off                                ● Input Block● Key Lock          : Off
 
SettingDescription
Off Time/On TimeSets the time to turn on or off the TV automatically. To use this function, you should set the current time and date in advance.
 
y If you do not press any button within 2 hours after the TV turns on by the On Time 
feature, the TV enters the Standby mode automatically.(Except for 22/26/32LK335C, 
32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C)
 
y   If you set both Off time and On time features to the same time, the Off time feature 
overrides the On time feature. 
NOTE
Sleep TimerSets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the Sleep timer feature will be set to off.
The available lock settings are described in the following.
 yImage shown may differ from your TV.
  
						

							77
ENGENGLISH
CUSTOMIZING SETTINGS
OPTION settings
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to OPTION and press OK.
3 Press the Navigation buttons to scroll to the setting or option you 
want and press OK.
- To return to the previous level, press BACK.
4  When you are finished, press EXIT.   
OPTIONOKMove
● Language(Language)● Country   : UK● Disability Assistance  ● ISM Method  : Normal● Factory Reset  ● Set ID  : 1● Mode Setting : Home Use 
The available general settings are described in the following.
 yImage shown may differ from your TV.
SettingDescription
LanguageSelects a language for the display or audio.
Option
Menu LanguageSelect your desired language.
Audio LanguageThe Audio function allows selection of a preferred language.If audio data in a selected language is not broadcast, the default lan-guage audio will be played.
Audio Language OSD Information
Display Status
N.A Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
  HE-AAC HE-AAC Audio
Subtitle LanguageUse the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the\
 default language subtitle will be displayed.
Subtitle Language OSD Information
Display
Status
N.A Not Available
Teletext Subtitle
 Subtitle for “Hard of Hearing”
Text LanguageIn Digital mode, use the Text language function when two or more Text languages are broadcast. If teletext data in a selected language is not \
broadcast, the default Text language page will be displayed.
 
y When the languages you selected as the primary for Audio Language and Subtitle Language 
and Text Language are not supported, you can select language in secondary cat\
egory.
 
y The audio/subtitles can be displayed in a simpler form with 1 to 3 chara\
cters broadcast by 
the service provider.
 
y When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may 
output a part of the Main audio.
NOTE
  
						

							78
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
CountrySelects a desired country.
 
y If you do not finish the set-up Installation Guide by pressing BACK or i\
f you time out on  
  the OSD (On Screen Display) the installation menu will continuously ap\
pear until the set  
  up is completed whenever the TV is switched on.
 
y If you select the wrong local country, teletext may not appear correctly on the screen   
  and some problems may occur during teletext operation.
 
y The CI (Common Interface) function may not be applied based on country\
 broadcasting  
  circumstances.
 
y DTV mode control buttons may not function based on country broadcasting \
   
  circumstances.
 
y In country that Digital broadcasting regulation isn’t fixed, some DTV\
 function may not   
  work depending on digital broadcasting circumstances.
 
y The Country Setting “UK” should only be activated in UK.
 
y If the country setting is set to “--”, European terrestrial digita\
l standard broadcasting    
  programmes are available, but some DTV functions may not work properly.
NOTE
Disabled Assist-ance (In Digital Mode only)Disability Assistance
Option
Hard of HearingThis function if for the hearing impaired.
Audio DescriptionThis function is for the blind, and provides explanatory audio describ-ing the current situation in a TV programme in addition to the basic audio.When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
VolumeChanges the Audio Description volume
BeepBeeps when a programme with Audio Description infor-mation is selected
ISM Method(Only Plasma TV)A frozen or still picture displayed on the screen for prolonged periods w\
ill result in a ghost imageremaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
Option
White WashWhite wash removes permanent images from the screen.Note: An excessive permanent image may be impossible to clear entirely with White Wash.
OrbiterOrbiter may help prevent ghost images. However, it is best not to allow any fixed image to remainon the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour WashThe colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.
  
						

							79
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
Power Indicator(Only LCD/LED LCD TV)
Sets to turn on or off the indicator light on the TV.If you select 3D mode, Power indicator is turned off automatically.
Option
Standby LightSet to turn on or off the indicator light in Standby mode.
Power LightSet to turn on or off the indicator light when you turn on the power.
Data Service(only in Ireland.)This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time.
Factory ResetThis function initializes all settings.
 
y In Lock System “On”, if you forget your password, press ‘0’, ‘3’, ‘2’, ‘\
5’ on the remote   
  control handset.
NOTE
Set IDAdds an ID to the connected devices
Mode SettingDefault selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
Option
Home UseSelects it for the home environment.
Store DemoSelects it for the retail environment.
Demo ModeSets to show special features of the TV. You can cancel the demo mode by pressing any buttons except the Volume and Mute buttons.
 
y It is not possible to use Demo Mode in Home Use
 mode.
 
y In Store Demo, Demo Mode is automatically set to On.
 
y Once Demo Mode is set to 
Off in Store Demo, Demo Mode  
  does not run and only the screen is reset.
 
y The screen is reset automatically after 5 minutes in 
Demo  
  Mode.
NOTE
  
						

							80
ENGENGLISH
CUSTOMIZING SETTINGS
NETWORK Settings
(Depending on model)
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and 
press OK.
3 Press the Navigation buttons to scroll to the setting or op-
tion you want and press OK.
- To return to the previous level, press BACK.
4  When you are finished, press EXIT.   
The available network settings are described in the following.
SettingDescription
Network SettingConfigure the network settings (See p.52).
Network StatusDisplay the network status (See p.53).
 yImage shown may differ from your TV.
NETWORKOKMove
● Network Setting  : Wired● Network Status  : Internet is connected