LG 32LG6000 Owners Manual

							109
PRODUCT SPECIFICATIONS
APPENDIX
■The specifications shown above may be changed without prior notice for quality improvement.
929 x 706.9x 374.7mm
36.6x 27.8 x 14.8 inches
929 x 665x 98.7mm
36.6x 26.1 x 3.9 inches
21.2 kg / 46.3 lbs
1 8.1 kg / 39.9 lbs
AC100-240V ~50/60Hz
1 80W1037.8 x 794.6 x 379.5mm
40.9x 31.2 x 14.9 inches
1037.8x 747x 80.8mm
40.9 x 29.4 x 3.2 inches
24.1 kg / 53.1 lbs
20.4 kg / 44.9 lbs
AC100-240V ~50/60Hz 
230 W
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Environment condition Television System
Program Coverage
External Antenna Impedance
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
VHF: E2 
~E12, UHF: E21 ~E69, CATV: S1 ~S20, HYPER: S21 ~S47
75   Ω
0  ~40°C / 32 ~  104°F
Less than 80%
-20  ~60°C / -4  ~ 140°F
Less than 85%
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption
with stand
without stand
with stand
without stand
37LG60
**
37LG6000-ZA
805.6 x 626 x 333 mm
31.7 x 24.6 x 13.1 inches
805.6x 587.4x 96.2mm
31.7 x 23.1 x 3.8 inches
14.4 kg / 31.7 lbs
12.2 kg / 26.9 lbs
AC100-240V ~50/60Hz 
15 0 W
32LG60 **
32LG6000-ZA 42LG60
**
42LG6000-ZA
42LG6000-ZG
MODELS
1037.8 x 798 x 379.5mm
40.9x 31.4 x 14.9 inches
1037.8x 747x 44.7mm
40.9 x 29.4 x 1.8 inches
21.3 kg / 47 lbs
18 kg / 39.7 lbs
AC100-240V
~50/60Hz 
230 W 1
152.8 x 868.6 x 434.5 mm
45.4 x 34.2 x 17.1 inches
1 152.8 x 820.8 x 79 mm
45.4 x 32.3 x 3.1 inches
32.8 kg / 73.3 lbs
27 .2 kg / 59.9 lbs
AC100-240V ~50/60Hz 
300W
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption with stand
without stand
with stand
without stand
42LG61
**
42LG6100-ZB
42LG6100-ZH 47LG60
**
47LG6000-ZA
47LG6000-ZG
MODELS
 Ofrecido por www.electromanuales.com
 
						

							110
APPENDIX
APPENDIX
■The specifications shown above may be changed without prior notice for quality improvement.
1044.4 x 735.4 x 308.0 mm
41.1x 28.9 x 12.1 inches
1044.4 x 680.6 x 79.6 mm
41.1 x 26.7 x 3.1 inches
28 kg / 61.7 lbs
25 kg / 55.1 lbs
AC100-240V~50/60Hz 
310 W 1235.6 x 849.3 x 364.1 mm
48.6 x 33.4x 14.3inches
1235.6 x 792.8 x 79.6 mm
48.6x 31.2 x 3.1 inches
43.65 kg / 96.2 lbs
39.7kg / 87.5lbs
AC100-240V
~50/60Hz 
420 W
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Environment condition Television System
Program Coverage
External Antenna Impedance
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
VHF: E2 
~E12, UHF: E21 ~E69, CATV: S1 ~S20, HYPER: S21 ~S47
75   Ω
0  ~40°C / 32 ~  104°F
Less than 80%
-20  ~60°C / -4  ~ 140°F
Less than 85%
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption
with stand
without stand
with stand
without stand
42PG60
**
42PG6000-ZA 42PG6010-ZE
825.5 x 586.0 x 270.0 mm
32.5 x 27.1 x 10.6 inches
825.5x 539.8x 73.8mm
32.5 x 21.3 x 2.9inches
18.0 kg / 39.7 lbs
16.3 kg / 35.9 lbs
AC100-240V ~50/60Hz 
230 W
32PG60 **
32PG6000-ZA 32PG6010-ZE 50PG60
**
50PG6000-ZA/ 50PG6000-ZY
50PG6010-ZEMODELS
1235.6 x 849.3 x 364.1 mm
48.6 x 33.4x 14.3inches
1235.6 x 792.8 x 79.6 mm
48.6x 31.2 x 3.1 inches
45.65 kg / 100.6 lbs
41.7kg / 91.9lbs
AC100-240V ~50/60Hz 
520 W 1455 x 985 x 414 mm
57.3 x 38.8 x 16.3 inches
1455 x 924.8 x 84.1 mm
57.3 x 36.4 x 3.3 inches
62.4kg / 137.6 lbs
54.9 kg / 121.0 lbs
AC100-240V
~50/60Hz 
700W
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption with stand
without stand
with stand
without stand
50PG70
**
50PG7000-ZB 60PG70
**
60PG7000-ZB
1232.0 x 850.0 x 363.6 mm
48.5 x 33.5 x 14.4 inches
1232.0 x 793.0 x 84.0 mm
48.5 x 31.2 x 3.3 inches
42.3 kg / 93.3 lbs
38.3 kg / 84.5 lbs
AC100-240V ~50/60Hz520 W
50PG40
**
50PG4000-ZA
MODELS
 Ofrecido por www.electromanuales.com
 
						

							111
APPENDIX
PROGRAMMING THE REMOTE CONTROL
Programming a code into a remote mode
Testing your remote control.To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a  S S
T
T B
B
) on the remote con-
trol, while pointing at the component. Test the POWER and P buttons to see if the component
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as  S S
T
T B
B
)
on the remote control. The remote control button of the desired device is illumintated.
Press the  M M
E
EN
N U
U
and M
M
U
UT
T
E buttons simultaneously, the remote control is ready to be programmed with
the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
Press the  M M
E
EN
N U
U
button to store the code.
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
1
2
3
4
5
6
 Ofrecido por www.electromanuales.com
 
						

							112
APPENDIX
APPENDIX
Brand CodesBrand Codes Brand Codes
HDSTB
ALPHASTAR DSR 123
AMPLICA 050
BIRDVIEW 051 126 129
CHANNEL MASTER 013 014 015 018
036 055
CHAPARRAL 008 009 012 077
CITOH 054
CURTIS MATHES 050 145
DRAKE 005 006 007 010   011 0 52 112 116
141
DX ANTENNA 024 046 056 076
ECHOSTAR 038 040 057 058 093 094 095 096
097 098 099 100
12 2
ELECTRO HOME 089
EUROPLUS 114
FUJITSU 017 021 022 027 13 3 13 4
GENERAL INSTRUMENT003 004 016 029
031 059 101
HITACHI 139 140
HOUSTON TRACKER033 037 039 051
057 104
HUGHES 068
JANIEL 060 147
JERROLD 061
KATHREIN 108
LEGEND 057
LG 001
LUTRON 132
LUXOR 062 144
MACOM 010 059 063 064
065
MEMOREX 057
NEXTWAVE 028 124 125
NORSAT 069 070
PACE SKY SATELLITE14 3
PANASONIC 060 142
PANSAT 121
PERSONAL CABLE 117
PHILIPS 071
PICO 105
PRESIDENT 019 102
PRIMESTAR 030 110 111 P RO S AT
072
RC A 066 106
REALISTIC 043 074
SAMSUNG 123
SATELLITE SERVICE CO028 035 047 057
085
SCIENTIFIC ATLANTA032 138
SONY 103
STARCAST 041
SUPER GUIDE 020 124 125
TEECOM 023 026 075 087
088 090 107 130
13 7
TOSHIBA 002 127
UNIDEN 016 025 042 043
044 045 048 049
078 079 080 086
10 13 5 13 6
VIEWSTAR 115
WINEGARD 128 146
ZENITH 081 082 083 084  
091 120
 Ofrecido por www.electromanuales.com
 
						

							113
APPENDIX
IR CODES
AConfiguration of frame 
1st frame
Repeat frame
ALead code
ARepeat code
AB Bi
it
t  
 d
d e
es
sc
c r
ri
ip
p t
ti
io
o n
n
AF
Fr
ra
a m
m e
e 
 i
in
n t
te
e r
rv
v a
a l
l:
:  
  T
T f
f 
 
The waveform is transmitted as long as a key is depressed.
C0C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
 Lead code Low custom code High custom codeData code Data code 
Repeat  code
Tf
4.5 ms
9 ms 
2.25 ms 
9 ms  0.55 ms 
0.56 ms
1.12 ms0.56 ms 2.24 ms
TfTf Tf=108ms @455KHz
Bit ”0”  Bit ”1”
1. How to Connect
AConnect your wired remote control to the Remote Control port on the TV. 
2. Remote Control IR Codes
AOutput waveform 
Single pulse, modulated with 37.917KHz signal at 455KHz   
T1
TcCarrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
 Ofrecido por www.electromanuales.com
 
						

							114
APPENDIX
APPENDIX
C
Co
od
de
e 
 (
( H
H e
ex
xa
a )
) F
Fu
u n
n c
ct
ti
io
o n
n N
No
ot
te
e
POWER 
INPUT
TV/RADIO
Q.MENU
MENU
GUIDE
Left ( )
Right ( )
Up ( )
Down ( )
OK(   )
RETURN
INFO  i
AV MODE + +
-
-
P 
P 
FAV
MUTE
Number Key 0 ~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.Option
SUBTITLE
Ô(Record)
SIMPLINK R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
08
0B f0
45
43
AB 07
06 40 41
44 28
AA 30
02 03
00 01
1E
09
10   ~19
53
1A 7271
63 61
20 21
39
BD 7E
 Ofrecido por www.electromanuales.com
 
						

							115
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
Type of Connector; D-Sub 9-Pin Male
No. Pin Name
1 No connection
2 RXD (
Receive data )
3 TXD  (
Transmit data )
4 DTR  (
DTE side ready )
5 GND
6 DSR  (
DCE side ready )
7 RTS  (
Ready to send )
8 CTS  (
Clear to send )
9 No Connection
15
69
RS-232C Configurations
7-Wire Configurations  (
Standard RS-232C cable )
PC TV
RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DSR
DSR 6 4 DTR
RTS 7 8 CTS
CTS 8 7 RTS
D-Sub 9 D-Sub 93-Wire Configurations (
Not standard )
PC TV
RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DTR
DSR 6 4 DSR
RT S 7 7 RT S
CTS 8 8 CTS
D-Sub 9 D-Sub 9
 Ofrecido por www.electromanuales.com
 
						

							116
APPENDIX
APPENDIX
Use this function to specify a set ID number. 
Refer to ‘Real Data Mapping’. 
G p p.
.1
1 2
20
0
Set ID
• Press  R
R
E
ET
T U
U R
RN
N
to move to the previous menu screen.
Select  O
O
P
PT
T I
IO
O N
N
.
Select  S
S
e
et
t 
 I
ID
D
.
Adjust  S
S
e
et
t 
 I
ID
D
to choose the desired TV ID number.
The adjustment range of SET ID is 1 ~99.
OKMove
Country : UK
Input Label
SIMPLINK : On
Key Lock : Off
Set ID
ISM Method : Normal
Power Saving : Level 0
Factory Reset
OPTIONE
Set ID
OKMove
Country : UK
Input Label
SIMPLINK : On
Key Lock : Off
Set ID
ISM Method : Normal
Power Saving : Level 0
Factory Reset
OPTIONE
Set IDF
F  
  
  
  
  
  
  
  
  
  
  
  
 1G
G
Close
1MENU
3 2
OK 
OK 
 Ofrecido por www.electromanuales.com
 
						

							APPENDIX
117
01. Power  k  a 00 ~01
02. Aspect Ratio  k  c       R efer to p. 118
03. Screen Mute  k  d 00  ~01
04. Volume Mute  k  e 00  ~01
05. Volume Control  k  f 00  ~64
06. Contrast  k  g 00 ~64
07. Brightness  k  h 00 ~ 64
08. Colour  k  i 00 ~64
09. Tint  k  j 00 ~64
10. Sharpness  k  k 00 ~ 64
1 1. OSD Select  k  l 00 ~ 01
12. 
Remote control lock modek m 00  ~01
13. Balance   k  t 00 ~64
14. 
Colour Temperaturek u 00  ~02
15. Abnormal Status k z 00  ~a
16. ISM Method  j p        R efer to p. 119
17. Power Saving j q 00  ~04
18. Auto Configuration j u 01
19. Equalize j v        Refer to p. 120
20. Tune Command m a        Refer to p. 120
21. Channel Add/Skip m b 00  ~01
22. Key m  c Key C ode
23. Control Back Light m  g 00  ~64
24. Input select (Main) x b Refer to p. 121
Communication Parameters
ABaud rate : 9600 bps  (
UART )
AData length : 8 bits
AParity : None
AStop bit : 1 bit
ACommunication code : ASCII code
AUse a crossed (reverse) cable.
Transmission
*  [Command 1] :  First command to control the TV.
(j, k, m or x)
*   [Command 2] :  Second command to control the TV.
*   [Set ID] :  You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99. 
When selecting Set ID ‘0’, every connect-
ed set is controlled.
Set ID is indicated as decimal (1 ~99) on
menu and as Hexa decimal (0x0 ~0x63)
on transmission/receiving protocol.
*   [DATA]  :  To transmit command data.
Transmit ‘FF’ data to read status of com-
mand.
*   [Cr] : Carriage Return
ASCII code ‘0x0D’
*   [   ]  :  ASCII code ‘space (0x20)’
[Command1][Command2][  ][Set ID][  ][Data][Cr]
OK Acknowledgement
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
[Command2][  ][Set ID][  ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based onthis format when receiving abnormal data from 
non-viable functions or communication errors.
[Command2][  ][Set ID][  ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
Data 00: Illegal Code
COMMAND 1 COMMAND
2 DATA
(Hexadecimal)
* When setting the 15 
~24, a menu does not appear on screen.
 Ofrecido por www.electromanuales.com
 
						

							APPENDIX
0
08
8.
. 
  C
C o
ol
lo
o u
ur
r 
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k  
 i
i )
)
GTo adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
Data Min :  00 ~Max : 64
*  Refer to ‘Real data mapping 1’. See page 120.
[k][i][  ][Set ID][  ][Data][Cr]
Ack
[i][  ][Set ID][  ][OK/NG][Data][x]
118
APPENDIX
0
0
4
4.
. 
  V
V o
ol
lu
u m
m e
e 
 M
M u
ut
te
e  
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k e
e)
)
GTo control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 :  Volume mute on (Volume off)
01  :  Volume mute off (Volume on)
[k][e][  ][Set ID][  ][Data][Cr]
Ack
[e][  ][Set ID][  ][ OK/NG][Data][x]
0 02
2.
. 
  A
A s
sp
p e
ec
ct
t 
 R
R a
at
ti
io
o  
 (
(C
C o
om
m m
ma
an
n d
d :
: 
  k
kc
c )
) 
 (
( M
M a
ai
in
n  
 P
P i
ic
c t
tu
u r
re
e  
 S
S i
iz
z e
e )
)
GTo adjust the screen format. (Main picture format)
You can also adjust the screen format using the A
A s
sp
p e
ec
ct
t 
 R
R a
at
ti
io
o
in the Q.MENU. or PICTURE menu.
Transmission
Data 01  :  Normal screen (4:3)
02   :  Wide screen (16:9) 
04  :  Zoom1 05   :  Zoom2
06  :  Original
07  
:  14:9
09  :  Just Scan
[k][c][  ][Set ID][  ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
*  In DTV/HDMI (1080i 50Hz/60Hz, 720p
24Hz/50Hz/60Hz, 1080p 24Hz/30Hz/50Hz/60Hz),
Component( 720p, 1080i, 1080p 50Hz/60Hz) mode,
Just Scan is available.
[c][  ][Set ID][  ][ OK/NG][Data][x]
0 0 3
3.
. 
  S
S c
cr
re
e e
en
n  
 M
M u
ut
te
e  
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k d
d)
)
GTo select screen mute on/off.
Transmission
Data 00 :  Screen mute off (Picture on)
01 :  Screen mute on (Picture off)
[k][d][  ][Set ID][  ][Data][Cr]
Ack
[d][  ][Set ID][  ][OK/NG][Data][x] 0
0
5
5.
. 
  V
V o
ol
lu
u m
m e
e 
 C
C o
on
nt
tr
ro
o l
l 
  (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k  
 f
f )
)
GTo adjust volume.
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
Data Min :  00 ~Max : 64
*  Refer to ‘Real data mapping 1’. See page 120.
[k][f][  ][Set ID][  ][Data][Cr]
Ack
[f][  ][Set ID][  ][OK/NG][Data][x]
0 0 6
6.
. 
  C
C o
on
nt
tr
ra
a s
st
t 
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k g
g)
)
GTo adjust screen contrast. 
You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 00 ~Max : 64
*  Refer to ‘Real data mapping 1’. See page 120.
[k][g][  ][Set ID][  ][Data][Cr]
Ack
[g][  ][Set ID][  ][OK/NG][Data][x]
0 0 7
7.
. 
  B
B r
ri
ig
g h
h t
tn
n e
es
ss
s 
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k h
h)
)
GTo adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 00  ~Max : 64
*  Refer to ‘Real data mapping 1’. See page 120.
[k][h][  ][Set ID][  ][Data][Cr]
Ack
[h][  ][Set ID][  ][
OK/NG][Data][x]
0 0
1
1.
. 
  P
P o
o w
w e
er
r 
 (
( C
C o
om
m m
ma
an
n d
d :
: 
  k
k  
 a
a )
)
GTo control Power On/Off of the set.
Transmission
Data 00 : Power Off 01: Power On
[k][a][  ][Set ID][  ][Data][Cr]
Ack
[a][  ][Set ID][  ][OK/NG][Data][x]
GTo show Power On/Off.
Transmission
[k][a][  ][Set ID][  ][FF][Cr]
Ack
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back pre-
sents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when TV is power On.
[a][  ][Set ID][  ][OK/NG][Data][x]
 Ofrecido por www.electromanuales.com