LG 32le7900 Owners Manual

197
APPENDIX
 
■ The specifications shown above may be changed without prior notice for q\
uality improvement.
MODELS
32LD8
***
32LD840-ZA / 32LD840N-ZA 32LD880-ZA / 32LD890-ZA
Dimensions
(Width x Height x 
Depth)with stand803.0 mm x 568.0 mm x 212.0 mm
without stand803.0 mm x 502.0 mm x 73.4 mm
Weightwith stand
without stand10.0 kg
8.6 kg
Power requirement
Power ConsumptionAC 100-240 V~ 50 / 60 Hz 150 W
MODELS
37LD8***
37LD840-ZA / 37LD840N-ZA 37LD880-ZA / 37LD890-ZA
Dimensions
(Width x Height x...

198
APPENDIX
APPENDIX
 
■ The specifications shown above may be changed without prior notice for q\
uality improvement.
MODELS
42LD8
***
42LD840-ZA / 42LD840N-ZA 42LD880-ZA / 42LD890-ZA
Dimensions
(Width x Height x 
Depth)with stand1030.0 mm x 701.0 mm x 260.0 mm
without stand1030.0 mm x 628.0 mm x 76.4 mm
Weightwith stand
without stand16.5 kg
13.9 kg
Power requirement
Power ConsumptionAC 100-240 V~ 50 / 60 Hz
210 W
CI Module Size
(Width x Height x Depth)100.0 mm x 55.0 mm x 5.0 mm
Environment condition...

199
APPENDIX
 
■ The specifications shown above may be changed without prior notice for q\
uality improvement.
 
■ For the power supply and power consumption, refer to the label attached \
to the product.
MODELS
50PK5
** 60PK5
**
50PK590-ZE 60PK590-ZE
Dimensions
(Width x Height x 
Depth)with stand1171.4 mm x 786.2 mm x 309.7 mm 1392.0 mm x 915.0 mm x 384.0 mm
without stand1171.4 mm x 724.4 mm x 55.3 mm 1392.0 mm x 852.0 mm x 55.3 mm
Weightwith stand
without stand31.0 kg
28.6 kg 45.9 kg
41.4 kg
MODELS...

200
APPENDIX
APPENDIX
Digital TVAnalogue TV
Television SystemDVB-T
DVB-C PAL/SECAM B/G/D/K, PAL I/II, 
SECAM L/L
’
Programme CoverageVHF, UHF VHF: E2 to E12, UHF: E21 to E69, 
CATV: S1 
to S20, HYPER: S21 to S47
Maximum number of storable programmes1,000
External Antenna  Impedance75  Ω 75 Ω
 
■ The specifications shown above may be changed without prior notice for q\
uality improvement.
 
■ For the power supply and power consumption, refer to the label attached \
to the product.
MODELS
50PK9
*** 60PK9...

201
APPENDIX
IR CODES
*This feature is not available for all models.
Code (Hexa)   Function Note
95 Energy Saving   R/C BUTTON 
08
 POWER    R/C BUTTON(POWER ON/OFF)
0B INPUT   R/C BUTTON
79 RATIO   R/C BUTTON
F0 TV/RAD   R/C BUTTON
45 Q.MENU   R/C BUTTON
43 MENU   R/C BUTTON
AB GUIDE   R/C BUTTON
40 Up (    )   R/C BUTTON
41 Down (    )   R/C BUTTON
07 Left (  
  )   R/C BUTTON
06 Right (  
  )   R/C BUTTON
44 OK(   )   R/C BUTTON
28 BACK   R/C BUTTON
5B EXIT   R/C BUTTON
AA INFO  i   R/C BUTTON 30 AV...

202
APPENDIX
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an 
external control device (such as a computer or an 
A/V control system) to control the product’s func-
tions externally.
Connect the serial port of the control device to the 
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied 
with the product.
15
69
RS-232C Configurations
7-Wire Configurations (
Standard RS-232C cable )
   PC  TV
  
 RXD 

  2  3...

203
APPENDIX
● Language(Language)
● Country :  UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
●● IR BIR BIR BIR Blastlastlastlaster :er :er :er :OffOffOff Off
OK
MoveOPTION
●
 Set ID  :1
Set ID
 
Use this function to specify a set ID number. 
Refer to ‘Real Data Mapping’. 
► p.
207
 • Press the BACK
 button to move to the previous menu screen.
◄           1            ►
Close
1Select OPTION .
2Select Set ID.
3Adjust Set ID to choose the desired TV ID...

204
APPENDIX
APPENDIX
Communication Parameters
 
■ Baud rate : 9600 bps  (
UART )
 
■ Data length : 8 bits
 
■ Parity : None
 
■ Stop bit : 1 bit
 
■ Communication code : ASCII code  
■ Use a crossed (reverse) cable.
Transmission
*  [Command 1]  :  First command to control the TV.
      (j, k, m or x)
*   [Command 2]  :  Second command to control the TV.
*   [Set ID]   :  
 You can adjust the set ID to choose 
desired monitor ID number in option 
menu. Adjustment range is 1 to 99. 
    
 When selecting...

205
APPENDIX
08. Colour (Command: k i)
 
► To adjust the screen colour.  You can also adjust colour in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
 
* Refer to ‘Real data mapping 1’. See 
page 207.
[k][i][  ][Set ID][  ][Data][Cr]
Ack
[i][  ][Set ID][  ][OK/NG][Data][x]
04. Volume Mute (
Command: k e)
 
► To control volume mute on/off.  You can also adjust mute using the MUTE button on 
remote control.
Transmission
Data  00 :  Volume mute on (Volume off)
 

01  :  Volume mute off (Volume on)...

206
APPENDIX
APPENDIX
12. Remote control lock mode ( Command: k m)
 
► To lock the front panel controls on the monitor and 
remote control.
Transmission
[k][m][  ][Set ID][  ][Data][Cr]
Ack
Data 
00 : Lock off 01 : Lock on
* If you are not using the remote control, use this  mode.
 

When main power is on/off, external control lock is 
released.
*  In the standby mode, if key lock is on, TV will not 
turn on by power on key of IR & Local Key
 .
[m][  ][Set ID][  ][OK/NG][Data][x]
11. OSD Select (Command:...