Home > LG > Television > LG 32le5900 Owners Manual

LG 32le5900 Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual LG 32le5900 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							197
    APPENDIX
     
    ■ The specifications shown above may be changed without prior notice for q\
    uality improvement.
    MODELS
    32LD8
    ***
    32LD840-ZA / 32LD840N-ZA 32LD880-ZA / 32LD890-ZA
    Dimensions
    (Width x Height x 
    Depth)with stand803.0 mm x 568.0 mm x 212.0 mm
    without stand803.0 mm x 502.0 mm x 73.4 mm
    Weightwith stand
    without stand10.0 kg
    8.6 kg
    Power requirement
    Power ConsumptionAC 100-240 V~ 50 / 60 Hz 150 W
    MODELS
    37LD8***
    37LD840-ZA / 37LD840N-ZA 37LD880-ZA / 37LD890-ZA
    Dimensions
    (Width x Height x 
    Depth)with stand922.0 mm x 640.0 mm x 260.0 mm
    without stand922.0 mm x 568.0 mm x 77.3 mm
    Weightwith stand
    without stand13.9 kg
    11.3 kg
    Power requirement
    Power ConsumptionAC 100-240 V~ 50 / 60 Hz 170 W
    CI Module Size
    (Width x Height x Depth)100.0 mm x 55.0 mm x 5.0 mm
    Environment condition Operating 
    Temperature
    Operating Humidity
    0 °C to 40 °C
    Less than 80 %
    Storage Temperature
    Storage Humidity-20 °C to 60° C
    Less than 85 %
    Supported movie filesRefer to p. 96 to 97
     
    						
    							198
    APPENDIX
    APPENDIX
     
    ■ The specifications shown above may be changed without prior notice for q\
    uality improvement.
    MODELS
    42LD8
    ***
    42LD840-ZA / 42LD840N-ZA 42LD880-ZA / 42LD890-ZA
    Dimensions
    (Width x Height x 
    Depth)with stand1030.0 mm x 701.0 mm x 260.0 mm
    without stand1030.0 mm x 628.0 mm x 76.4 mm
    Weightwith stand
    without stand16.5 kg
    13.9 kg
    Power requirement
    Power ConsumptionAC 100-240 V~ 50 / 60 Hz
    210 W
    CI Module Size
    (Width x Height x Depth)100.0 mm x 55.0 mm x 5.0 mm
    Environment condition Operating 
    Temperature
    Operating Humidity
    0 °C to 40 °C
    Less than 80 %
    Storage Temperature
    Storage Humidity-20 °C to 60° C
    Less than 85 %
    Supported movie filesRefer to p. 96 to 97
     
    						
    							199
    APPENDIX
     
    ■ The specifications shown above may be changed without prior notice for q\
    uality improvement.
     
    ■ For the power supply and power consumption, refer to the label attached \
    to the product.
    MODELS
    50PK5
    ** 60PK5
    **
    50PK590-ZE 60PK590-ZE
    Dimensions
    (Width x Height x 
    Depth)with stand1171.4 mm x 786.2 mm x 309.7 mm 1392.0 mm x 915.0 mm x 384.0 mm
    without stand1171.4 mm x 724.4 mm x 55.3 mm 1392.0 mm x 852.0 mm x 55.3 mm
    Weightwith stand
    without stand31.0 kg
    28.6 kg 45.9 kg
    41.4 kg
    MODELS
    50PK7
    *** 60PK7
    ***
    50PK760-ZC / 50PK760N-ZC 50PK780-ZC / 50PK790-ZC 60PK760-ZC / 60PK760N-ZC
    60PK780-ZC / 60PK790-ZC
    Dimensions
    (Width x Height x 
    Depth)with stand1184.0 mm x 801.0 mm x 294.5 mm 1402.8 mm x 934.3 mm x 384.0 mm
    without stand1184.0 mm x 738.5 mm x 52.4 mm1402.8 mm x 866.8 mm x 52.4 mm
    Weightwith stand
    without stand34.5 kg
    29.9 kg 50.3 kg
    42.7 kg
    CI Module Size
    (Width x Height x Depth)100.0 mm x 55.0 mm x 5.0 mm
    Environment conditionOperating 
    Temperature
    Operating Humidity
    0 °C to 40 °C
    Less than 80 %
    Storage Temperature
    Storage Humidity-20 °C to 60° C
    Less than 85 %
    Supported movie filesRefer to p. 96 to 97
     
    						
    							200
    APPENDIX
    APPENDIX
    Digital TVAnalogue TV
    Television SystemDVB-T
    DVB-C PAL/SECAM B/G/D/K, PAL I/II, 
    SECAM L/L
    ’
    Programme CoverageVHF, UHF VHF: E2 to E12, UHF: E21 to E69, 
    CATV: S1 
    to S20, HYPER: S21 to S47
    Maximum number of storable programmes1,000
    External Antenna  Impedance75  Ω 75 Ω
     
    ■ The specifications shown above may be changed without prior notice for q\
    uality improvement.
     
    ■ For the power supply and power consumption, refer to the label attached \
    to the product.
    MODELS
    50PK9
    *** 60PK9
    ***
    50PK950-ZA / 50PK960-ZA
    50PK950N-ZA / 50PK980-ZA 50PK990-ZA 60PK950-ZA / 60PK960-ZA
    60PK950N-ZA / 60PK980-ZA 60PK990-ZA
    Dimensions
    (Width x Height x 
    Depth)with stand1190.0 mm x 804.5 mm x 294.5 mm 1408.8 mm x 937.9 mm x 384.0 mm
    without stand1190.0 mm x 737.0 mm x 52.4 mm 1408.8 mm x 860.7 mm x 52.4 mm
    Weightwith stand
    without stand34.8 kg
    30.2 kg 50.9 kg
    43.3 kg
    MODELS
    50PX9
    *** 60PX9
    ***
    50PX960-ZA / 50PX950N-ZA /  50PX980-ZA / 50PX990-ZA 60PX960-ZA / 60PX950N-ZA / 
    60PX980-ZA / 60PX990-ZA
    Dimensions
    (Width x Height x 
    Depth)with stand1190.0 mm x 804.5 mm x 294.5 mm 1408.8 mm x 937.9 mm x 384.0 mm
    without stand1190.0 mm x 737.0 mm x 52.4 mm 1408.8 mm x 860.7 mm x 52.4 mm
    Weightwith stand
    without stand34.8 kg
    30.2 kg 50.9 kg
    43.3 kg
    CI Module Size
    (Width x Height x Depth)100.0 mm x 55.0 mm x 5.0 mm
    Environment conditionOperating 
    Temperature
    Operating Humidity
    0 °C to 40 °C
    Less than 80 %
    Storage Temperature
    Storage Humidity-20 °C to 60° C
    Less than 85 %
    Supported movie filesRefer to p. 96 to 97
     
    						
    							201
    APPENDIX
    IR CODES
    *This feature is not available for all models.
    Code (Hexa)   Function Note
    95 Energy Saving   R/C BUTTON 
    08
     POWER    R/C BUTTON(POWER ON/OFF)
    0B INPUT   R/C BUTTON
    79 RATIO   R/C BUTTON
    F0 TV/RAD   R/C BUTTON
    45 Q.MENU   R/C BUTTON
    43 MENU   R/C BUTTON
    AB GUIDE   R/C BUTTON
    40 Up (    )   R/C BUTTON
    41 Down (    )   R/C BUTTON
    07 Left (  
      )   R/C BUTTON
    06 Right (  
      )   R/C BUTTON
    44 OK(   )   R/C BUTTON
    28 BACK   R/C BUTTON
    5B EXIT   R/C BUTTON
    AA INFO  i   R/C BUTTON 30 AV MODE   R/C BUTTON
    02
      +   R/C BUTT ON
    03
     -   R/C BUTTON
    1E FAV  (MARK) (CHAR/NUM)   R/C BUTTON
    09
    
    MUTE  (DELETE)   R/C BUTTON
    00 P      R/C BUTT
    
    ON
    01 P      R/C BUTTON
    10 to 19 Number Key 0 to 9   R/C BUTTON
    53 LIST   R/C BUTTON
    1A Q.VIEW   R/C BUTTON
    72 RED Key   R/C BUTTON
    71 GREEN Key   R/C BUTTON
    63 YELLOW Key   R/C BUTTON
    61 BLUE Key (L/R SELECT)  R/C BUTTON
    20
    
    TEXT   R/C BUTTON
    21 T.OPT(T.Option)   R/C BUTTON
    39 SUBTITLE   R/C BUTTON
    7E SIMPLINK   R/C BUTTON
    91 AD   R/C BUTTON
    B1 ▀   R/C BUTTON
    B0 ►   R/C BUTTON
    BA
    l l (FREEZE:Plasma TV only)   R/C BUTTON
    8F ◄◄   R/C BUTT
    ON
    8E ►►   R/C BUTTON
    59 NetCast   R/C BUTTON
    58 @   R/C BUTTON
    DC 3D   R/C BUTTON
    9F APP/*    R/C BUTT
     ON
     
    						
    							202
    APPENDIX
    APPENDIX
    EXTERNAL CONTROL DEVICE SETUP
    RS-232C Setup
    Connect the RS-232C (serial port) input jack to an 
    external control device (such as a computer or an 
    A/V control system) to control the product’s func-
    tions externally.
    Connect the serial port of the control device to the 
    RS-232C jack on the product back panel.
    Note: RS-232C connection cables are not supplied 
    with the product.
    15
    69
    RS-232C Configurations
    7-Wire Configurations (
    Standard RS-232C cable )
       PC  TV
      
     RXD 
    
      2  3  TXD
     TXD  3  2  RXD
     GND  5  5  GND
     DTR  4  6  DSR
     DSR  6  4  DTR
     RTS  7  8  CTS
     CTS  8  7  RTS
      
        D-Sub 9  D-Sub 9
    3-Wire Configurations (
    Not standard )
       PC  TV
      
     RXD 
    
      2  3  TXD
     TXD  3  2  RXD
     GND  5  5  GND
     DTR  4  6  DTR
     DSR  6  4  DSR
     RTS  7  7  RTS
     CTS  8  8  CTS
      
        D-Sub 9  D-Sub 9
    Type of Connector; D-Sub 9-Pin Male
    No. Pin Name
    1
    2
    3
    4
    5
    6
    7
    8
    9 No connection
    RXD 
    (
    Receive data )
    TXD  (
    T
    
    ransmit data )
    DTR  (
    DTE side ready )
    GND
    DSR  (
    DCE side ready )
    RTS  (
    Ready to send )
    CTS  (
    Clear to send )
    No Connection
     
    						
    							203
    APPENDIX
    ● Language(Language)
    ● Country :  UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
    ●● IR BIR BIR BIR Blastlastlastlaster :er :er :er :OffOffOff Off
    OK
    MoveOPTION
    ●
     Set ID  :1
    Set ID
     
    Use this function to specify a set ID number. 
    Refer to ‘Real Data Mapping’. 
    ► p.
    207
     • Press the BACK
     button to move to the previous menu screen.
    ◄           1            ►
    Close
    1Select OPTION .
    2Select Set ID.
    3Adjust Set ID to choose the desired TV ID number.
    The adjustment range of SET ID is 1 to 
     99.
    ●  Language(Language)
    ● Country :  UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
    ●● IR BIR BIR BIR Blastlastlastlaster :er :er :er :OffOffOff Off
    OK
    MoveOPTION
    ●
     Set ID  :1►►
     
    						
    							204
    APPENDIX
    APPENDIX
    Communication Parameters
     
    ■ Baud rate : 9600 bps  (
    UART )
     
    ■ Data length : 8 bits
     
    ■ Parity : None
     
    ■ Stop bit : 1 bit
     
    ■ Communication code : ASCII code  
    ■ Use a crossed (reverse) cable.
    Transmission
    *  [Command 1]  :  First command to control the TV.
          (j, k, m or x)
    *   [Command 2]  :  Second command to control the TV.
    *   [Set ID]   :  
     You can adjust the set ID to choose 
    desired monitor ID number in option 
    menu. Adjustment range is 1 to 99. 
        
     When selecting Set ID ‘0’, every con-
    nected set is controlled.
        
     Set ID is indicated as decimal (1 to 99) 
    on menu and as Hexa decimal (0x0 to 
    0x63) on transmission/receiving proto-
    col.
    *   [DATA]    :  To transmit command data.
         
     Transmit ‘FF’ data to read status of com-
    mand.
    *   [Cr]    :  Carriage Return
          ASCII code ‘0x0D’
    *   [   ]    :  ASCII code ‘space (0x20)’
    [Command1][Command2][  ][Set ID][  ][Data][Cr]
    OK Acknowledgement
    * The set transmits ACK (acknowledgement) based 
    on this format when receiving normal data. At this 
    time, if the data is data read mode, it indicates 
    present status data. If the data is data write mode, 
    it returns the data of the PC computer.
    [Command2][  ][Set ID][  ][OK][Data][x]
    Error Acknowledgement
    * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from 
      non-viable functions or communication errors.
    [Command2][  ][Set ID][  ][NG][Data][x]
    Transmission / Receiving Protocol
    Command Reference List
    Data 00:  Illegal  Code
    * Note : During USB operations such as 
    DivX or EMF, all 
    commands except Power(ka) and Key(mc) are not exe-
    cuted and treated as NG.
     COMMAND  
    1 COMMAND  
    2 D ATA
    (Hexadecimal)
    01. Power    k a 00 to 01  
    02. Aspect  Ratio   k cRefer to p. 205
    03. Screen Mute   k dRefer to p. 205
    04. Volume Mute   k e 00 to 01
    05. V
     olume Control   kf 00 to 64
    06. Contrast   k g 00 to 64
    07. Brightness   k h 00 to 64
    08. Colour ki 00 to 64
    09. Tint   kj 00 to 64
    10. Sharpness   k k 00 to 64  
    11. OSD Select   kl 00 to 01
    12. 
    Remote control lock modek m 00 to 01
    13. Treble    kr 00 to 64
    14. 
    Bassk s 00 to 64
    15. Balance   kt 00 to 64
    16. 
    Colour Temperaturex u 00 to 64
    17. 
    ISM Methodjp Refer to p. 207
    18.  Energy Saving jq00 to 05
    19. Auto  Configuration ju 01
    20.  Tune Command m aRefer to p. 207
    21.  Programme Add/Skip m b 00 to 01
    22.  Key m c Key Code
    23. Control Back Light m g 00 to 64
    24. Input select (Main) x   bRefer to p. 208
     
    						
    							205
    APPENDIX
    08. Colour (Command: k i)
     
    ► To adjust the screen colour.  You can also adjust colour in the PICTURE menu.
    Transmission
    Data Min : 00 to Max : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][i][  ][Set ID][  ][Data][Cr]
    Ack
    [i][  ][Set ID][  ][OK/NG][Data][x]
    04. Volume Mute (
    Command: k e)
     
    ► To control volume mute on/off.  You can also adjust mute using the MUTE button on 
    remote control.
    Transmission
    Data  00 :  Volume mute on (Volume off)
     
    
    01  :  Volume mute off (Volume on) 
    [k][e][  ][Set ID][  ][Data][Cr]
    Ack
    [e][  ][Set ID][  ][OK/NG][Data][x]
    02. Aspect Ratio (Command: k c) (Main Picture Size)
     
    ► To adjust the screen format.  (Main picture format)
      You can also adjust the screen format using the 
    Aspect Ratio in the Q.MENU. or PICTURE menu.
    Transmission
    Data  01  :  Normal screen (4:3)  
      02  :  Wide screen (16:9)  
      04  :  Zoom
      06  :  Original 07  :  14:9
    09  :  Just Scan
    0B  :  Full Wide
    10 to 1F : Cinema Zoom 1 to 16
    [k][c][  ][Set ID][  ][Data][Cr]
    Ack
    * Using the PC input, you select either 16:9 or 4:3 
    screen aspect ratio.
    *  In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 
    60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), 
    Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) 
    mode, Just Scan is available.
    *  Full Wide  is supported only f
    or Digital, 
    Analogue, 
    AV .
    [c][  ][Set ID][  ][OK/NG][Data][x]
    03. Screen Mute (Command: k d)
     
    ► To select screen mute on/off.
    Transmission
    Data 00 :  Screen mute off (Picture on)
          Video mute off
      01 :  Screen mute on (Picture off)
      10 :  Video mute on
    * In case of video mute on only, TV will display On 
    Screen Display(OSD). But, in case of Screen mute 
    on, TV will not display OSD.
    [k][d][  ][Set ID][  ][Data][Cr]
    Ack
    [d][  ][Set ID][  ][OK/NG][Data][x] 05. Volume Control (
    Command: k f)
     
    ► To adjust volume.  You can also adjust volume with the VOLUME but-
    tons on remote control.
    Transmission
    Data Min : 00 to Max : 64
      * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][f][  ][Set ID][  ][Data][Cr]
    Ack
    [f][  ][Set ID][  ][OK/NG][Data][x]
    06. Contrast ( Command: k g)
     
    ► To adjust screen contrast.   You can also adjust contrast in the PICTURE menu.
    Transmission
    Data Min : 00 to Max : 64
      * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][g][  ][Set ID][  ][Data][Cr]
    [g][  ][Set ID][  ][OK/NG][Data][x]
    07. Brightness (Command: k h)
     
    ► To adjust screen brightness.  You can also adjust brightness in the PICTURE menu.
    Transmission
    Data Min : 00 to Max : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][h][  ][Set ID][  ][Data][Cr]
    Ack
    [h][  ][Set ID][  ][OK/NG][Data][x]
    01. Power (Command: k a)
     
    ► To control Power On/Off of the set.
    Transmission
    Data  00 : Power Off 01 : Power On
    [k][a][  ][Set ID][  ][Data][Cr]
    Ack
    [a][  ][Set ID][  ][OK/NG][Data][x]
     
    ► To show Power On/Off.
    Transmission
    [k][a][  ][Set ID][  ][FF][Cr]
    Ack
    * Similarly, if other functions transmit ‘0xFF’ data  based on this format, Acknowledgement data feed 
    back presents status about each function.
    * OK Ack., Error Ack. and other message may dis- play on the screen when TV is power On.
    [a][  ][Set ID][  ][OK/NG][Data][x]
    Ack
     
    						
    							206
    APPENDIX
    APPENDIX
    12. Remote control lock mode ( Command: k m)
     
    ► To lock the front panel controls on the monitor and 
    remote control.
    Transmission
    [k][m][  ][Set ID][  ][Data][Cr]
    Ack
    Data 
    00 : Lock off 01 : Lock on
    * If you are not using the remote control, use this  mode.
     
    
    When main power is on/off, external control lock is 
    released.
    *  In the standby mode, if key lock is on, TV will not 
    turn on by power on key of IR & Local Key
     .
    [m][  ][Set ID][  ][OK/NG][Data][x]
    11. OSD Select (Command: k l)
     
    ► To select OSD (On Screen Display) on/off when con-
    trolling remotely.
    Transmission
    [k][l][  ][Set ID][  ][Data][Cr]
    Ack
     Data 
    00 : OSD off 01 : OSD on
    [l][  ][Set ID][  ][OK/NG][Data][x]
    09. Tint (
    Command: k j)
     
    ► To adjust the screen tint.
      You can also adjust tint in the PICTURE menu.
    Transmission
    Data Red : 00 to Green : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][j][  ][Set ID][  ][Data][Cr]
    Ack
    [j][  ][Set ID][  ][OK/NG][Data][x]
     
    ► To adjust the screen sharpness.  You can also adjust sharpness in the PICTURE menu.
    Transmission
    10. Sharpness (Command: k k)
    Data 
    
    Min : 00 to Max : 64
      * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][k][  ][Set ID][  ][Data][Cr]
    Ack
    [k][  ][Set ID][  ][OK/NG][Data][x]
    15. Balance (Command: k t)
     
    ► To adjust balance.  You can also adjust balance in the AUDIO menu.
    Transmission
    Data Min : 00 to Max : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][t][  ][Set ID][  ][Data][Cr]
    Ack
    [t][  ][Set ID][  ][OK/NG][Data][x]
    14. Bass (Command: k s)
     
    ► To adjust bass.  You can also adjust bass in the AUDIO menu.
    Transmission
    Data Min : 00 to Max : 64
      * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][s][  ][Set ID][  ][Data][Cr]
    Ack
    [s][  ][Set ID][  ][OK/NG][Data][x]
    13. Treble (Command: k r)
     
    ► To adjust treble.   You can also adjust treble in the AUDIO menu.
    Transmission
    Data Min : 00 to Max : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [k][r][  ][Set ID][  ][Data][Cr]
    Ack
    [r][  ][Set ID][  ][OK/NG][Data][x]
    16. Colour Temperature (Command: x u)
     
    ► To adjust colour temperature. You can also adjust Colour 
    Temperature in the PICTURE menu.
    Transmission
    Data Min : 00 to Max : 64
     
    * Refer to ‘Real data mapping 1’. See 
    page 207.
    [x][u][  ][Set ID][  ][Data][Cr]
    Ack
    [u][  ][Set ID][  ][OK/NG][Data][x]
     
    						
    All LG manuals Comments (0)

    Related Manuals for LG 32le5900 Owners Manual