LG 32ld555 Owners Manual

							
13
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Reset.
4
Select  Ye s.
5Run  Reset .
To Set
Auto Config.
SCREENMove Prev.
Resolution
Position
Size
Phase
Reset
Ye sNo
OK
Move PICTURE
 ShShSh•Sh•Sh•ShShSh Sharpnarpnarpnarpnarpnarpnarpnppessessessessessessess 707070707070707070 • Colour 60
 • Tint 0
 • Colour Temp. 0
 • Advanced Control
  • Picture Reset
• TruMotion
• Screen
RGW C
• Screen►
 
						

							
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the 
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, \
and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in pr\
ogress.
Auto Configure (RGB [PC] mode only)
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•   If the position of the image is still not correct, 
try Auto adjustment again.
•  
If picture needs to be adjusted again after 
Auto adjustment in RGB (PC), you can adjust 
the  Position , Size  or Phase .
1 Select  PICTURE .
2Select Screen .
3Select Auto Config. .
4
Select Ye s.
5Run  Auto Config. .
Auto Config.
Auto Config.
SCREENMove
Prev.
Resolution
Position
Size
Phase
Reset
Ye sNo
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh Sharpnarpnarpnarpnarpnarpnarpnppessessessessessessess 707070707070707070 • Colour 60
 • Tint 0
 • Colour Temp. 0
 • Advanced Control
  • Picture Reset
• TruMotion
• Screen
RGW C
• Screen►
 
						

							
15
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection \
of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Resolution .
4Select the desired resolution.
5
Auto Config.
SCREENMove Prev.
Resolution
Position
Size
Phase
Reset
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh Sharpnarpnarpnarpnarpnarpnarpnappessessessessessessess 707070707070707070
 • Colour 60
 • Tint 0
 • Colour Temp. 0
 • Advanced Control
  • Picture Reset
• TruMotion
• Screen
RGW C
• Screen
1024 x 768
1280 x 768
1360 x 768
►
 
						

							
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if char\
acters are still trembling, adjust 
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Position , Size  or Phase .
4 Make appropriate adjustments.
5
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh ShSarpnarpnarpnarpnarpnarpnarpnappessessessessessessess ess7070707070707070700 • Colour 60
 • Tint 0
 • Colour Temp. 0
 • Advanced Control
  • Picture Reset
• TruMotion
• Screen
RGW C
• Screen►
Auto Config.
SCREEN
Resolution
Position
Size
Phase
Reset
Move Prev.
 
						

							
17
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP 
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT PROGRAMME SELECTION
1If the OSD (On Screen Display) is displayed on the screen after turnin\
g on the TV, you can 
adjust the Language , Mode Setting , Power Indicator (When you select  Home Use from 
Mode Setting -  Only LED LCD TV MODELS),  Country or TimeZone  (When Russia is select-
ed for Country) or  Set Password(When France is selected for Country),  Auto Tuning.
Note: 
a.  If you close without completing the initial setting, the Initial Setting\
 menu can be displayed 
again.
b.  Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some D\
TV features might  not work, depending on the DTV broadcasting environment.
d.  Home Use” mode is the optimal setting for home environments, and is \
the TVs default mode.
e. Store Demo mode is the optimal setting for store environments. If a us\
er modifies image quality 
data, “Store Demo” mode initializes the product to the image quali\
ty set by us after a certain period 
of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setti\
ng in the OPTION menu.
g
. When France is selected for Country, password is not 0, 0, 0, 0  but ‘1’, ‘2’, ‘3’, ‘4’.
1Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2In standby mode to turn TV on, press the  / I, INPUT  or P         (or P  ▲▼ ) button on the TV 
or press the  POWER, INPUT , P        
 or  NUMBER  button on the remote control and the TV 
will switch on.
1Press the  P          or NUMBER buttons to select a programme number.
1Press the  + or - button to adjust the volume.
2If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, 
 +  , -  or AV Mode button.
 
						

							
18
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
  Aspect Ratio: Selects your desired picture for-
mat.
   For Zoom Setting, select 14:9, Zoom and  Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to 
Q.Menu.
  Clear Voice II  : By differentiating the human 
sound range from others, it helps users lis-
ten to human voices better.
  Picture Mode  : Selects your desired Picture 
Mode.
  Sound Mode  : It is a feature to automatical-
ly set the sound combination which it deems 
the best for the images being watched. 
Selects your desired Sound Mode.
  Audio  or Audio Language  : Selects the sound 
output
.
 Sleep Timer  : Sets the sleep timer.
 Skip Off/On : Selects the Skip Off/On.
 USB Device : Selects “Eject” in order to eject 
USB device.
QUICK MENU
Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use freque\
ntly.
• 
Press the Q.MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Display each menu.
2Select your desired Source.
3
◄  Aspect Ratio ►
16:9
Exit
 
						

							
19
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual.
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
• Press the  RED button, you can check the 
Customer Support  menu.
• Press the  GREEN button, you can check 
the  Simple Manual  menu.
• 
Press the  MENU/EXIT  button to return to 
normal TV viewing.
• Press the  BACK button to move to the pre-
vious menu screen.
NOTE
 
► It is not possible to use  CI Information in Analogue mode.
 
► IR Blaster  : For further information, refer to the optional  “Wireless Media Box” manual for operat-
ing instructions. 
 
► It is possible to use  Movie List menu in 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 
32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/\
52/60LD555, 
32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 1\
9/22/26/32LD346 
32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336.
1Display each menu.
2Select a menu item.
3Move to the pop up menu.
OK
Move
●
 Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIMEOK
Move
●
 Set Password● Lock System  : Off
 ●  Block Programme
 ●  Parental Guidance  : Blocking Off
 ●  Input Block● Key Lock  : Off
LOCK
● Language(Language)● Country : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
●●●● IR BIR BIR BIR BIR BIR Bltlastlastlastlastlastererererer
OK
MoveOPTION
OK
Move 
●
 Aspect Ratio  : 16:9● Picture Wizard●        Energy Saving  : Off● Picture Mode  : Standard
 • Backlight 70 
 • Contrast 100
 • Brightness 50
 
S•Sh•Sh Sharpnarpnarpnessessess 707070
PICTUREOK
Move
●
 Auto Volume  : Off
● Clear Voice II  : Off  3
● Balance   0
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
RRe•Re•Re•Re•ReRe Retsetsetsetsetsetsetset
AUDIO
LR
Movie ListMusic ListPhoto List
MY MEDIA
Exit
OptionPress OK(     ) to see photos from the USB.
SETUPPICTURE
LOCK
OPTION AUDIOINPUT
TIMEMY MEDIA
(Except for 19/22/26/32LD3
***, 
 32/37/42/47LD4 ***, 19/22/26LE3
***, 22/26LE5
***)
AntennaUSB
HDMI2HDMI3HDMI4HDMI1
AV 1AV 2Component
RGB
OK
MoveInput List
Input LabelExit
AV 3
 
						

							
20
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING 
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service informati\
on will be deleted.
The maximum number of programmes that can be stored is 1,000. But the nu\
mber may differ slightly 
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable. 
If you want to select the Antenna,
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Use NUMBER buttons to input a 4-digit 
password in  Lock System  ‘On ’.
• If you wish to keep on auto tuning select  Start  using the 
       button. Then, press 
the  OK button. Otherwise select  Close. 
•  Automatic Numbering : Decide whether 
to use the programme numbers as sent 
by broadcasting stations for tuning.
• When select Italy in the County menu, If  the pop up is displayed when the conflict-
ed programme after Auto Tuning, select a 
broadcaster for Conflicting programme 
number to solve.
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Auto Tuning
OK
Move
●
 ●  Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Auto TuningPlease select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
1Select  SETUP .
2Select Auto Tuning .
3
Select Antenna .
4Select Start.
5Run Auto tuning .
Antenna Cable
Antenna CableCheck your antenna connection. 
The previous channel information 
will be updated during Auto Tuning.
SECAM L Search
Automatic Numbering
Start
Close
Antenna
Antenna
►
• In the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland, 
Denmark, Austria, Finland, Norway, Slovenia, Hungary, Ukraine. (The supported country can be 
added.)
• In the following country, Digital TV can not be used : Slovakia, Bosnia, Serbia, Bulgaria, Albania,  Kazakhstan.
 
						

							
21
WATCHING TV / PROGRAMME CONTROL
If you want to select the Cable,
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP .
2Select Auto Tuning .
3
Select Cable.
4Select  Comhem or Other  
Operators .
5
Select Quick or Full .
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OK
Move
●
 ●  Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OK
Move
●
 ●  Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto TuningPlease select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
Antenna Cable
Antenna Cable
►►►
• Use NUMBER buttons to input a 4-digit 
password in  Lock System  ‘On ’.
• When you select the  Cable, the Cable 
Service Operator  selection screen can 
differ or not exist by the Cable situation of 
the applicable country.
• The popup window to select 
Service 
Operator
 is only shown initially for the 3 
cases when you accessing the  Initial 
Setting  menu, when you change from 
Antenna  to Cable  or when you access 
the menu after changing the  Country.
• When you want to select 
Service Operator 
aside from the above 3 cases, you can do 
so by selecting  Setup->Cable DTV 
Setting-> Service Operator .
• Acquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital, 
Stofa), Norway(Canal Digital), Netherlands(Ziggo), Ukraine(Volia-Cable)
• If there are not any Service Operator that you want, select  Other Operators.
• If you select “Other Operators”, or the selected country supp\
orts “Other Operators” only, it may  take some time to search all the channels, or it may not search some of \
the channels.
   If some of the channels do not appear, follow the steps below:
   1.  SETUP  -> Auto Tuning  -> Cable  -> Setting
   2. Switch  Home Tuning   from Off to  On
   3. Input additional values such as the frequency, symbol rate, modulation, and network ID. 
      (You can ask your cable service provider for the above information.)
Previous Next
Comhem
Other Operators
Service Operator
 
						

							
22
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
 
■ When you select the Quick,
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network : Auto
OK
Close
Setting
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network : Auto
OK
Close
Setting
•   If you wish to keep on auto tuning, select 
Start  using the 
       button. Then, press 
the  OK button. Otherwise select  Close. 
•  Automatic Numbering : Decide whether 
to use the programme numbers as sent 
by broadcasting stations for tuning.
•  Skip Scramble Programme  : Scramble 
Programme is skipped in  Auto Tuning 
and  Manual Tuning .
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Home Tuning◄    On    ►● Frequency(kHz)
Network ID
Start Frequency(kHz)
End Frequency(kHz)
●  Symbol rate(kS/s)
● Modulation
362000
Auto
114000
862000
6900
0
640QAM
Reset
Close
6Select  Quick.
7Select  Setting .
8Make appropriate 
adjustments.
9Select Close.
10Select  OK.
11Select  Start.
12Run Auto tuning .
Check your antenna connection. The 
previous channel information will be 
updated during Auto Tuning.
Skip Scramble Programme
Automatic Numbering
Start
Close
Cable
Cable