LG 32LD400, 42LD400, 47LD500 Lcd Tv Owners Guide

21
EXTERNAL EQUIPMENT SETUP
VCR Setup
ANTENNA/CABLE INLRS-VIDEOV IDEO
AUDIO
OUTPUTSWITCH
ANT IN
ANT OUT
1
2
Antenna Connection
1. How to connect
1
2
Connect the RF antenna out 
socket of the VCR to the 
ANTENNA/CABLE IN socket on 
the TV.
Connect the antenna cable to 
the RF antenna in socket of the 
VCR.
2. How to use
r Set VCR output switch to 3 or 4 and 
then tune TV to the same channel 
number.
r Insert a video tape into the VCR and  press PLAY on the VCR (Refer to the 
VCR owner’s manual)....

22
EXTERNAL EQUIPMENT SETUP
ANTENNA/CABLE INVIDEOAV INAARGB IN
COMPONENT IN
PRPBY
OPTICALDIGITALTTAUDIO OUT
AUDIO
AUDIOAUDIO OUT
AUDIORGB (PC)1
2
VIDEO
/ DVI INDD
DVI ADDUDIO
VIDEOAV
 IN
AUDIO
LRVIDEO AUDIO
1
1. How to connect
1Connect the AUDIO/VIDEO 
jacks between TV and external 
equipment. Match the jack 
colors. (Video = yellow, Audio 
Left = white, and Audio Right = 
red)
2. How to use
r Select the  AV input source on the TV 
using the INPUT button on the remote 
control.
r Operate the...

23
EXTERNAL EQUIPMENT SETUP
NOTE
a When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu.
Audio Out Connection
Send the TV’s audio to external audio equipment via the Audio Output port.
Digital Connection to a Home Theater Audio System
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the 
OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
ANTENNA/CABLE INVIDEOAV INAARGB IN...

24
EXTERNAL EQUIPMENT SETUP
PC Setup
This TV provides Plug and Play capability, meaning that a PC adjusts automatically to 
the TV’s settings.
ANTENNA/CABLE INVIDEOAV INAARGB IN
COMPONENT IN
PRPBY
OPTICALDIGITALTTAUDIO OUT
AUDIO
AUDIOAUDIO OUT
AUDIORGB (PC)1
2
VIDEO
/ DVI INDD
DVI ADDUDIO
RGB INAUDIO
RGB (PC)
RGB OUTPUTAUDIO
12
1. How to connect
1
2
Connect the VGA output of the 
PC to the RGB IN (PC) jack on 
the TV.
Connect PC audio output to the 
RGB IN (AUDIO) jack on the TV.
2. How to use
r Turn on...

25
EXTERNAL EQUIPMENT SETUP
NOTE
a To get the the best picture quality, adjust the PC graphics card to 1920 x 1080.
a Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
a In PC mode, there may be noise associated with the resolution, vertical pattern,  contrast or brightness.
a If noise is present, change the PC output to another resolution, change the  refresh rate to another rate or adjust the brightness and contrast on the 
PICTURE menu until the picture is clear....

26
WATCHING TV / CHANNEL CONTROL
WATCHING TV/ CHANNEL CONTROL
Remote Control Functions
When using the remote control, aim it at the remote control sensor on the TV.
The remote control may differ from the images below.
PICTURESOUNDSAPRATIO
TVINPUTPOWER
FAV
CC
MUTE
MENURETURNQ.MENU
VO LCH
123
456
789
-0FLASHBK
ENTER
Group No. Item Description
TV Returns to the last TV channel.
POWER Turns the TV on from standby or off to standby.
INPUT Rotates through inputs.
RATIO Changes the aspect ratio.
SAP Selects MTS...

27
WATCHING TV / CHANNEL CONTROL
Installing Batteries
r Open the battery compartment cover on the back side and install the batteries matching 
correct polarity.
r Install two 1.5V AAA batteries. Don’t mix old or  used batteries with new ones.
r Close cover.
Group No. Item Description
CHANNEL 
(UP/DOWN) Changes the channel.
RETURN Allows the user to move return one step in an interactive 
application or other user interaction function.
FAV Scroll through the programmed Favorite channels.
CC Switches the...

28
WATCHING TV / CHANNEL CONTROL
Turning on the TV
1
2
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
a In standby mode to turn TV on, press the POWER button.
Select the viewing source by using the INPUT button on the remote control.
When finished using the TV, press press the POWER button on the remote 
control. The TV reverts to standby mode.
3
Channel Selection
1Press the CHANNEL or NUMBER buttons to select a channel number.
Volume Adjustment
1
2
Press the VOLUME...

29
WATCHING TV / CHANNEL CONTROL
Initial Setting
This Function guides the user to easily set the essential items for viewing the TV for the 
first time when purchasing the TV. It will be displayed on the screen when turning the 
TV on for the first time. It can also be activated from the user menus.
r Default selection is “Home”. We recommend setting the TV to “Home” mode for the best picture in your home environment.
r “In Store” Mode is only intended for use in retail environments. Customers can...

30
WATCHING TV / CHANNEL CONTROL
Enter
Step3.  Option Setting
1.OSD Language Setting
2.Audio Langua ge Setting
ExitRETURN
English
English
3. Option Setting
1
2
Select OSD Language 
Setting option.
Select Audio Language 
Setting option.
Press the ENTER button.
3ENTER
Enter
Enter
Step4.  Au to Tuning
Au to Tuning can change channel map.
Do you want to start Au to Tu ning?
ExitRETURN
4. Auto Tuning
1
2
Check your antenna 
connection and press the 
ENTER button to start Auto 
Tuning.
Select Ye s   to begin...