LG 32ld320 Owners Manual

							PREPARATION
21
DETACHMENT
Carefully  place  the  TV  screen  side  down  on  a
cushioned  surface  to  protect  the  screen  from
damage.1
Loose the bolts from TV.2
Detach the stand from TV.3
PROTECTION COVER
After  removing  the  stand,  install  the  included
p pr
ro
ot
te
ec
ct
ti
io
on
n 
 c
co
ov
ve
er
r
over  the  hole  for  the
stand.
Press the P PR
RO
OT
TE
EC
CT
TI
IO
ON
N 
 C
CO
OV
VE
ER
R
into the TV
until you hear it click.
4  
						

							PREPARATION
22
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
G GDo not install your wall mount kit while your TV is turned on. It may result in personal
injury due to electric shock.CAUTION
G GScrew  length  needed  depends  on  the  wall  mount
used.  For  further  information,  refer  to  the  instruc-
tions included with the mount.
G GStandard dimensions for wall mount kits are shown
in the table.
G GWhen  purchasing  our  wall  mount  kit,  a  detailed
installation  manual  and  all  parts  necessary  for
assembly are provided.
G GDo not use screws longer then the standard dimen-
sion,  as  they  may  cause  damage  to  the  inside  to
the TV.
G GFor wall mounts that do not comply with the VESAstandard  screw  specifications,  the  length  of  the
screws  may  differ  depending  on  their  specifica-
tions.
G GDo  not  use  screws  that  do  not  comply  with  the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal  injury.  LG  is  not  liable  for  these  kinds  of
accidents.
G GLG  is  not  liable  for  TV  damage  or  personal  injury
when  a  non-VESA  or  non  specified  wall  mount  is
used or the consumer fails to follow the TV installa-
tion instructions.
NOTE!
ModelVESA (A 
*B)
Standard Screw QuantityWall Mounting Bracket
(sold separately)
19LD350,
22LD350
37LD450,
42LD450,
47LD450 26LD350
32LD350,
32LD45010 0
* 10 0 M 4 4
20 0
* 10 0 M 4 4
20 0
* 20 0 M 6 4A A
B B
RW230AW-47LG30M
AW-47LG30MRW120
RW230  
						

							PREPARATION
23
CABLE MANAGEMENT
For 19/22LD350
After connecting the cables as necessary,
install CABLE HOLDERas shown and bundle
the cables.
K
AC-IN1
Image shown may differ from your TV.  
						

							PREPARATION
24
CABLE MANAGEMENT
PREPARATION
Image shown may differ from your TV.
For 26/32LD350, 32/37/42/47LD450
AC  IN
AC  IN
AC  IN
AC  IN
AC  IN
AC  IN
AC  IN
AC  IN
AC  IN
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Open the CABLE MANAGEMENT CLIPas
shown.
CABLE MANAGEMENT CLIP
1
2
Put the cables inside the CABLE MANAGEMENT
CLIPand snap it closed.3  
						

							PREPARATION
25
SWIVEL STAND (Except 19/22LD350)
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
POSITIONING YOUR DISPLAY (For 19/22LD350)
Here shown may be somewhat different from your TV.
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
12030  
						

							PREPARATION
26
DESKTOP PEDESTAL INSTALLATION
PREPARATION
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
Image shown may differ from your TV.
4 inches
G GEnsure adequate ventilation by following the clearance recommendations.
G
GDo not mount near or above any type of heat source.
CAUTION
4 inches 4 inches4 inches  
						

							PREPARATION
27
ATTACHING THE TV TO A DESK (Except 19/22LD350)
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.
G GTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
WARNING
1-Screw
(provided as parts of the product)
Desk
Stand
KENSINGTON SECURITY SYSTEM
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on
the back panel. Connect the Kensington Security System cable as
shown below.
- For  the  detailed  installation  and  use  of  the  Kensington  Security
System,  refer  to  the  user’s  guide  provided  with  the  Kensington
Security System.
For  further  information,  contact h ht
tt
tp
p:
:/
//
/w
ww
ww
w.
.k
ke
en
ns
si
in
ng
gt
to
on
n.
.c
co
om
m
,
the internet homepage of the Kensington company. Kensington sells
security  systems  for  expensive  electronic  equipment  such  as  note-
book PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.  
						

							PREPARATION
28
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
PREPARATION
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. 
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product. 
Caution: Please make sure that children don’t climb on or hang from the TV. 
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. 
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. 
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product. 
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
G GUse a platform or cabinet strong enough and large enough to support the size and weight of the TV.
G
GTo use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
NOTE!  
						

							PREPARATION
29
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
2. Cable
Wa l l
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Cable TV
Wall JackMulti-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the copper wire
when connecting the antenna.
Copper Wire
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.   
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
ANTENNA
/CABLE IN
To prevent damage do not connect to the power outlet until all connections are made between the devices.
Image shown may differ from your TV.
ANTENNA
/CABLE IN  
						

							EXTERNAL EQUIPMENT SETUP
30
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.
Component Connection
1. How to connect
Connect the video outputs (
Y,   PB, PR)
of the digital set-
top  box  to  the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O 
 
jacks  on
the TV. Match the jack colors (Y = green, P
B= blue, and
P
R= red).
Connect the audio output of the digital set-top box to 
the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 A
AU
UD
DI
IO
O 
 
jacks on the TV.
2
1
2. How to use
Turn on the digital set-top box. 
(
Refer to the owner’s manual for the digital set-top box operation.)
Select theC Co
om
mp
po
on
ne
en
nt
t
input source on the TV using the
I IN
NP
PU
UT
T
button on the remote control.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 3 32
2L
LD
D3
35
50
0
.
RS-232C IN(CONTROL&SERVICE)
ANTENNA
/CABLE IN
B IN (PC)
VIDEOAUDIORL(MONO)
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)AV IN 1
VIDEOYPBPRLRAUDIOCOMPONENT IN
YLRPBPR
12
Y, CB/PB, CR/PRSupported Resolutions
Horizontal  Vertical 
Frequency(
KHz)
Frequency(
Hz)
15.73 59.94
15.73 60.00
31.47 59.94
31.50 60.00
44.96 59.94
45.00 60.00
33.72 59.94
33.75 60.00
26.97 23.976
27.00 24.00
33.71 29.97
33.75 30.00
67.432 59.94
67.50 60.00 Resolution 
720x480i
720x480p
1280x720p
1920x1080i
1920x1080pSignal
480 i
480 p
720 p
10 8 0 i
10 8 0 pComponent
Ye s
Ye s
Ye s
Ye s
Ye sHDMI
No
Ye s
Ye s
Ye s
Ye s