LG 32lc43 Owners Manual

							9
PREPARATION
ATTACHING THE TV TO A WALL
Plasma TV models LCD TV models
2  1
This feature is not available for all models.
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from
falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please
make sure that children don’t climb on or hang from the product.
NOTE!
G GWhen moving the product to another place undo the ropes first.
G
GUse a product holder or a cabinet that is big and strong enough for the size and weight of the product.
G
GTo use the product safely make sure that the height of the bracket that is mounted on the wall is same as
that of the product. 
2 
3 1
1
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. 
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall.
3Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the
product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
 Ofrecido por www.electromanuales.com
 
						

							10
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
PREPARATION
Plasma TV models
Connect the cables as necessary.
To connect an additional equipment, see the E Ex
xt
te
er
rn
na
al
l 
 e
eq
qu
ui
ip
pm
me
en
nt
tS
Se
et
tu
up
p 
 
section.
Reinstall the C CA
AB
BL
LE
E 
 M
MA
AN
NA
AG
GE
EM
ME
EN
NT
T
as shown.2
1
3
CABLE MANAGEMENT
Hold the C CA
AB
BL
LE
E 
 M
MA
AN
NA
AG
GE
EM
ME
EN
NT
T 
 
with hands and push it as shown.
 Ofrecido por www.electromanuales.com
 
						

							11
PREPARATION
LCD TV models
Connect the cables as necessary.
To connect an additional equipment, see the
E Ex
xt
te
er
rn
na
al
l 
 e
eq
qu
ui
ip
pm
me
en
nt
tS
Se
et
tu
up
p
section.1
Install the C CA
AB
BL
LE
E 
 M
MA
AN
NA
AG
GE
EM
ME
EN
NT
T
as shown.2
Bundle the cables using the supplied twister
holder.
(
This feature is not available for all models.)
3
Hold  the C CA
AB
BL
LE
E 
 M
MA
AN
NA
AG
GE
EM
ME
EN
NT
T
with  both
hands and pull it upward.
NOTE!
G GDo not hold the C CA
AB
BL
LE
E 
 M
MA
AN
NA
AG
GE
EM
ME
EN
NT
T 
 
when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
How to remove the cable management
CABLE MANAGEMENT
 Ofrecido por www.electromanuales.com
 
						

							12
PREPARATION
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
4 inches 4 inches
4 inches
4 inches
Power Supply
Short-circuit Breaker
GROUNDING
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods
are not possible, have a qualified electrician install a separate circuit breaker. 
Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
 Ofrecido por www.electromanuales.com
 
						

							13
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For  proper  ventilation,  allow  a  clearance  of  4"  on  each  side  and  from  the  wall.  Detailed  installation  instruc-
tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches 4 inches
4 inches 4 inches4 inches
 Ofrecido por www.electromanuales.com
 
						

							14
PREPARATION
AV IN 3L / MONO
RAUDIO
VIDEO
S-VIDEO
12
VARIABLE
AUDIO OUTRGB IN
COMPONENT INAUDIO
VIDEO
AV 1 AV 2ANTENNA
       INHDMI/DVI IN HDMI INAV 1 AV 2ANTENNA
IN
VARIABLE AUDIO OUTVIDEOAUDIOCOMPONENT IN
AV IN 3
L / MONO
RAUDIO
VIDEO
HDMI/DVI IN HDMI IN12RGB IN
S-VIDEO
AV IN 3
L / MONO
R
AUDIO
VIDEO
S-VIDEO
12
VARIABLE
AUDIO OUTRGB IN
COMPONENT INAUDIO
VIDEO
AV 1 AV 2
ANTENNA
       INHDMI/DVI IN HDMI IN
AV IN 3
L / MONO
R
AUDIO
VIDEO
S-VIDEO
12
VARIABLE
AUDIO OUTRGB IN
COMPONENT INAUDIO
VIDEO
AV 1 AV 2
ANTENNA
       INHDMI/DVI IN HDMI IN
PREPARATION
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
Antenna
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
UHF
Signal
Amplifier
VHF
In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
 Ofrecido por www.electromanuales.com
 
						

							15
EXTERNAL EQUIPMENT SETUP 
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
1
12
When connecting with a component cable
Connect the video outputs (
Y,   PB, PR)
of the digital set
top box to the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O
jacks on the
set. 
Connect the audio output of the digital set-top box to
the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 A
AU
UD
DI
IO
O
jacks on the set.
Turn on the digital set-top box. 
(
Refer to the owner’s manual for the digital set-top box.)
Select
Componentinput source with using the
I IN
NP
PU
UT
T 
 
button on the remote control.
2
3
4
1
12
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models.
Signal
480i/576i
480p/576p
720p/1080i
10 8 0 pComponent
Ye s
Ye s
Ye s
NoHDMI1/2
No
Ye s
Ye s
Ye s
(except VGA Models)
 Ofrecido por www.electromanuales.com
 
						

							
16
EXTERNA\b EQUI\fMENT SETU\f 
EXTERNA\b EQUI\fMENT SETU\f

1
12

When \bonne\btin\f with a HDMI \bable
Connect  t\be  HDM\f  output  of  t\be  digital  set-top  box  to
t\be H H
D
D M
M \f
\f/
/ D
D V
V\f
\f 
  \f
\fN
N  
 1
1  
 
or  H
H
D
D M
M \f
\f 
  \f
\fN
N  
 2
2  
 
jack on t\be set.
Select 
HDMI1 or HDMI2input source wit\b using t\be
\f
\f N
N P
PU
U T
T
button on t\be remote control.
Turn on t\be digital set-top box. 
( Refer to t\be owner’s manual for t\be digital set-top box. )2
3
1
G GTV can receive t\be video and audio signal simultaneously wit\b using a HDM\f cable.
G
G\ff t\be digital set-top box supports Auto HDM\f function, t\be output resolution of t\be source device will 
be automatically set to 1280x720p.
G G\ff t\be digital set-top box player does not support Auto HDM\f, you need to set t\be output resolution 
appropriately.
To get t\be best picture quality, adjust t\be output resolution of t\be source device to 1280x720p.
NOTE
!

1
 Ofrecido por www.electromanuales.com
 
						

							17
EXTERNAL EQUIPMENT SETUP 
1
12
12
Connect the DVI output of the digital set-top box to the H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N 
 1
1 
 
jack on the set.
Connect the audio output of the digital set-top box to the A AU
UD
DI
IO
O(
(R
RG
GB
B/
/D
DV
VI
I)
) 
 
jack on the set.
Turn on the digital set-top box. (
Refer to the owner’s manual for the digital set-top box.)
Select 
HDMI1 input source with using the I IN
NP
PU
UT
T
button on the remote control.
2
3
4
1
When connecting with a HDMI to DVI cable
 Ofrecido por www.electromanuales.com
 
						

							18
EXTERNAL EQUIPMENT SETUP 
DVD SETUP
EXTERNAL EQUIPMENT SETUP
When connecting with a component cable
AV IN 3
L / MONO
R
AUDIO
VIDEO
S-VIDEO
1212
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
YPBPR
Video output ports 
on DVD player
Y
Y
Y
YPB
B-Y
Cb
PbP
R
R-Y
Cr
Pr
Connect the video outputs (
Y,   PB, PR)
of the DVD  to the
C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O
jacks on the set.
Connect  the  audio  outputs  of  the  DVD  to  the C CO
OM
MP
PO
O-
-
N NE
EN
NT
T 
 I
IN
N 
 A
AU
UD
DI
IO
O
jacks on the set.
Turn on the DVD player, insert a DVD.
Select 
Componentinput source with using the I IN
NP
PU
UT
T
button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
3
4
5
1
12
 Ofrecido por www.electromanuales.com