LG 32lc2r Owners Manual
Have a look at the manual LG 32lc2r Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
INSTALLATION 19 HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING Plasma TV models LCD TV models 2 1 Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don’t climb on or hang from the product. NOTE! G G When moving the product to another place undo the ropes first. G G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product. 2 3 1 1 2 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase sepa- rately) on the wall. Match the height of the bracket that is mounted on the wall. 3Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. Ofrecido por www.electromanuales.com
20 ANTENNA CONNECTION CONNECTIONS & SETUP CONNECTIONS & SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown to the right. If signal needs to be split for two TVs, use an antenna signal splitter for connection. S Si ig gn na al l A Am mp pl li if fi ie er r UHF VHF ANTENNAIN Multi-family Dwellings/Apartments (Connect to wall antenna socket) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)Outdoor AntennaWall Antenna Socket VHF Antenna UHF AntennaRF Coaxial Wire (75 ohm) Turn clockwise to tighten. ANTENNAIN ANTENNAIN ANTENNAIN ANTENNAIN Ofrecido por www.electromanuales.com
CONNECTIONS & SETUP 21 VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. S-VIDEO OUTIN (R) AUDIO (L) VIDEO 34OUTPUT SWITCH ANT OUTANT IN VIDEOS-VIDEO( )AUDIO AV IN 3 VIDEOS-VIDEO( )AUDIO AV IN 3 HDMI IN HDMI IN AUDIO OUT UDIO OUTVARIABLE ANTENNA ANTENNAIN V VC CR R 1 2 When connecting with an antenna Connect the A AN NT T OOU UT T socket of the VCR to the A AN NT TE EN NN NA A IIN N socket on the set. Connect the antenna cable to the A AN NT T IIN N socket of the VCR. Press the P PL LA AY Y button on the VCR and match the appropriate programme between the TV and VCR for viewing. S-VIDEO OUTIN (R) AUDIO (L) VIDEO 34OUTPUT SWITCH ANT OUTANT IN VIDEOS-VIDEO( )AUDIO AV IN 3 VIDEO AUDIO COMPONENT IN AV 1AV 2 VIDEOS-VIDEOMONO( )AUDIO AV IN 3 HDMI IN AUDIO OUTVARIABLE ANTENNAIN V VC CR R 1 1 2 3 When connecting with a RCA cable Connect the A AU UD DI IO O /V VI ID DE EO O jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A AV V3 3 input source using the I IN NP PU UT T button on the remote control. - If connected to A AV V IIN N 44 , select AV 4input source. (except 42PC3RV *, 42PC3RA *) 1 2 3 NOTE! G GIf you have a mono VCR, connect the audio cable from the VCR to the A AU UD DI IO O LL/ /M MO ON NO O jack of the set. Ofrecido por www.electromanuales.com
22 VCR SETUP CONNECTIONS & SETUP CONNECTIONS & SETUP S-VIDEO OUTIN (R) AUDIO (L) VIDEO 34OUTPUT SWITCH ANT OUTANT IN VIDEO AUDIO COMPONENT IN AV 1AV 2 VIDEOS-VIDEOMONO( )AUDIO AV IN 3 VIDEOS-VIDEO( )AUDIO AV IN 3 HDMI IN AUDIO OUTVARIABLE ANTENNAIN V VC CR R VIDEO AUDIO COMPONENT INAV 1 V 1AV 2 MONO ( ) AUDIOVIDEO S-VIDEO AV IN 3 (R) AUDIO (L) AUDIO/ VIDEOV VC CR R 1 12 When connecting with a Euro Scart Connect the Euro scart socket of the VCR to the A AV V1 1 Euro scart socket on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A AV V1 1 input source with using the I IN NP PU UT T button on the remote control. - If connected to A AV V2 2 Euro scart socket, select AV 2input source. 1 2 3 NOTE! G GIf the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to the S- Video2 mode. G GIf you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable. When connecting with an S-Video cable Connect the S-VIDEO output of the VCR to the S S- -V VI ID DE EO O input on the set. The picture quality is improved; com- pared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A AU UD DI IO O input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 1 2 3 Select AV 3input source with using the I IN NP PU UT T button on the remote control. 4 NOTE! G GIf both S-VIDEO and VIDEO sockets have been conneced to the S-VHS VCR simultaneously, only the S- VIDEO can be received. Ofrecido por www.electromanuales.com
CONNECTIONS & SETUP 23 EXTERNAL EQUIPMENT CONNECTIONS AV IN 4 V IN 4 L/MONO MONO RAUDIO AUDIO VIDEO VIDEO RLAUDIOVIDEO Camcorder Video Game Set 1 Connect the A AU UD DI IO O /V VI ID DE EO O jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) Select AV 4input source with using the I IN NP PU UT T button on the remote control. (except 42PC3RV *, 42PC3RA *) - If connected to A AV V IIN N3 3 input, select AV 3input source. Operate the corresponding external equipment. Refer to external equipment operating guide. 1 2 3 Ofrecido por www.electromanuales.com
24 DVD SETUP CONNECTIONS & SETUP CONNECTIONS & SETUP RGB IN(PC/DTV) RS-232C IN(CONTROL & SERVICE) AUDIO OUTVARIABLE HDMI IN ( )AUDIOVIDEOS-VIDEO AV IN 3 MONO( )AUDIOVIDEO S-VIDEO AV IN 3 AV 1AV 2 VIDEOAUDIO COMPONENT IN B R(R) AUDIO (L)D DV VD D VIDEO AUD IO COMPONENT INAV 1 V 1AV 2 MONO ( ) AUDIOVIDEO S-VIDEO AV IN 3 (R) AUDIO (L) AUDIO/ VIDEO DVD 1 12 When connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the C CO OM MP PO ON NE EN NT T IIN N VVI ID DE EO O jacks on the set. Connect the audio outputs of the DVD to the C CO OM MP PO O- - N NE EN NT T IIN N AAU UD DI IO O jacks on the set. Turn on the DVD player, insert a DVD. 1 2 3 Select C Co om mp po on ne en nt t input source with using the I IN NP PU UT T button on the remote control.4 Refer to the DVD player's manual for operating instruc- tions.5 NOTE! G GC Co om mp po on ne en nt t IIn np pu ut t ppo or rt ts s To get better picture quality, connect a DVD player to the component input ports as shown below. YPBPRComponent ports on the TV Y Y Y YPb B-Y Cb P B Pr R-Y Cr P R Video output ports on DVD player When connecting with a Euro Scart Connect the Euro scart socket of the DVD to the A AV V1 1 Euro scart socket on the set. Turn on the DVD player, insert a DVD. Select AV 1input source with using the I IN NP PU UT T button on the remote control. - If connected to A AV V2 2 Euro scart socket, select AV 2input source. 1 2 3 NOTE! G GP Pl le ea as se e uus se e tth he e ssh hi ie el ld d ssc ca ar rt t cca ab bl le e. . Ofrecido por www.electromanuales.com
CONNECTIONS & SETUP 25 RGB IN(PC/DTV) RS-232C IN(CONTROL & SERVICE) AUDIO OUTVARIABLE HDMI IN AV 1AV 2 VIDEO AUDIO COMPONENT IN MONO( )AUDIOVIDEOS-VIDEO AV IN 3 VIDEOAUDIO COMPONENT IN S-VIDEO(R) AUDIO (L)D DV VD D 12 REMOTE CONTROL INAUDIO IN (RGB) RGB IN RGB IN(PC/DTV) RS-232C IN RS-232C IN(CONTR (CONTROL & SERVICE) VICE) AUDIO OUT UDIO OUTVARIABLE HDMI IN ( )AUDIOVIDEOS-VIDEO AV IN 3 VIDEOAUDIO COMPONENT IN HDMI-DVD OUTPUT D DV VD D 1 1 When connecting with a S-Video cable Connect the S-VIDEO output of the DVD to the S S- -V VI ID DE EO O input on the set. Connect the audio outputs of the DVD to the A AU UD DI IO O input jacks on the set. Turn on the DVD player, insert a DVD. 1 2 3 Select AV 3input source with using the I IN NP PU UT T button on the remote control.4 Refer to the DVD player's manual for operating instruc- tions.5 When connecting with a HDMI cable Connect the HDMI output of the DVD to the H HD DM MI I IIN N jack on the set. Select HDMIinput source with using the I IN NP PU UT T button on the remote control. Refer to the DVD player's manual for operating instruc- tions. 1 2 3 NOTE! G GTV can receive the video and audio signal simultaneously with using a HDMI cable. G GIf the DVD supports Auto HDMI function, the DVD output resolution will be automatically set to 1280x720p. G GIf the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 1280x720p. Ofrecido por www.electromanuales.com
26 STB (SET-TOP BOX) SETUP CONNECTIONS & SETUP CONNECTIONS & SETUP RGB IN(PC/DTV) RS-232C IN(CONTROL & SERVICE) AUDIO OUTVARIABLE HDMI IN ( )AUDIOVIDEOS-VIDEO AV IN 3 MONO( )AUDIOVIDEO S-VIDEO AV IN 3 AV 1AV 2 VIDEOAUDIO COMPONENT IN B R(R) AUDIO (L)D Di ig gi it ta al l S Se et t- -t to op p BBo ox x RS-232C IN(CONTROL & SERVICE) HDMI IN AUDIO OUTVARIABLE RGB IN(PC/DTV) RGB IN(PC/DTV) (PC/DTV) RS-232C IN(CONTROL & SERVICE) AUDIO OUT UDIO OUTVARIABLE HDMI IN HDMI IN REMOTE CONTROL INAUDIO IN (RGB) (R) AUDIO (L)DVI-DTV OUTPUTD Di ig gi it ta al l SSe et t- -t to op p B Bo ox x 1 1 2 2 When connecting with a component cable Connect the video outputs (Y, PB, PR) of the digital set-top box to the C CO OM MP PO ON NE EN NT T IIN NV VI ID DE EO O jacks on the set. Connect the audio output of the digital set-top box to the C CO OM MP PO ON NE EN NT T IIN N AAU UD DI IO O jacks on the set. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 2 3 Select Componentinput source with using the I IN NP PU UT T button on the remote control.4 NOTE!Signal 480i/576i 480p/576p/720p/1080i Component Ye s Ye sRGB-DTV No Ye s HDMI No Ye s When connecting with a HDMI to DVI cable Connect the DVI output of the digital set-top box to the H HD DM MI I I IN N jack on the set. Connect the audio outputs of the set-top box to the A AU UD DI IO O I IN N ((R RG GB B) ) jack on the set. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)1 2 3 Select HDMIinput source with using the I IN NP PU UT T button on the remote control.4 G GIf the digital set-top box has a DVI output and no HDMI output, a separated audio connection is neces- sary. G GIf the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 1280x720p. G GIf the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p. NOTE! Ofrecido por www.electromanuales.com
CONNECTIONS & SETUP 27 (R) AUDIO (L)RGB-DTV OUTPUT REMOTE CONTROL IN RS-232C IN RS-232C IN(CONTROL & SER SERVICE) HDMI IN AUDIO OUT UDIO OUTVARIABLE RGB IN RGB IN(PC/DTV) AUDIO IN (RGB) RGB IN(PC/DTV) RS-232C IN(CONTROL & SERVICE) AUDIO OUTVARIABLE HDMI IN D Di ig gi it ta al l S Se et t- -t to op p BBo ox x 12 When connecting with a D-sub 15 pin cable Connect the RGB output of the digital set-top box to the R RG GB B IIN N ((P PC C/ /D DT TV V) ) jack on the set. Connect the audio outputs of the set-top box to the A AU UD DI IO O IIN N ((R RG GB B) ) jack on the set. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 2 3 Select RGB-DTVinput source with using the I IN NP PU UT T button on the remote control.4 REMOTE CONTROL INAUDIO IN (RGB) RGB IN RGB IN(PC/DTV) RS-232C IN RS-232C IN(CONTR (CONTROL OL & SER SERVICE) VICE) AUDIO OUT UDIO OUTVARIABLE HDMI IN ( )AUDIOVIDEOS-VIDEO AV IN 3 VIDEOAUDIO COMPONENT IN HDMI-DVD OUTPUT 1 1 When connecting with a HDMI cable Connect the HDMI output of the digital set-top box to the H HD DM MI I IIN N jack on the set. Select HDMIinput source with using the I IN NP PU UT T button on the remote control. Turn on the digital set-top box. (Refer to the owner’s man- ual for the digital set-top box.) 1 2 3 NOTE! G GTV can receive the video and audio signal simultaneously with using a HDMI cable. G GIf the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will be automatically set to 1280x720p. G GIf the digital set-top box does not support Auto HDMI, you need to set the output resolution appropri- ately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p. D Di ig gi it ta al l S Se et t- -t to op p BBo ox x Ofrecido por www.electromanuales.com
28 PC SETUP C\bNNECTI\bNS & SETUP C\bNNECTI\bNS & SETUP T\fis TV provides Plug and Play capability, meaning t\fat t\fe PC adjusts automatically to t\fe TV's settings. NOTE \b To enjoy \bi\bid pi\fture and sound, \fonne\ft a PC to the set. A\boid keeping a fixed image on the set’s s\freen for a long period of time. The fixed image may be\fome permanently imprinted on the s\freen; use a s\freen sa\ber when possible. Conne\ft PC to the RGB INPUT(PC INPUT) port of the set; \fhange the resolution output of PC a\f\fordingly. There might be a noise a\f\fording to some reso- lution, \berti\fal pattern, \fontrast or brightness in PC mode. Then \fhange the PC mode into other resolution or \fhange the refresh rate into other rate or adjust the brightness and \fontrast on the menu until the pi\fture is \flean. If the refresh rate of the PC graphi\f \fard \fan not be \fhanged, \fhange the PC graphi\f \fard or \fonsult it to the manufa\fturer of the PC graphi\f \fard.The syn\fhronization input form for Horizontal and Verti\fal frequen\fies is separate. We re\fommend using 640x480, 60Hz (42PC1RV *, 42PC3RV *) /1360x768, 60Hz (26LC2R *, 27LC2R *, 32LC2R *, 32LC25R *, 26LC3R *, 32LC3R *, 32LX2R *, 32LE2R *, 37LE2R *, 42LE2R *) /1024x768, 60Hz (42PC3RA *) for the PC mode, they pro\bide the best pi\fture quality. If the resolution of PC is o\ber SXGA, there will be no pi\fture on the set. Conne\ft the audio \fable from the PC to the Audio input on the set. (Audio \fables are not in\fluded with the set). When you use too long RGB-PC \fable, there might be a noise on the s\freen. We re\fommend using under 5m of the \fable. It pro\bides the best pi\fture quality. 4 4 5 51 2 3 6 7 8 9 Wh\fn conn\fcting with a D-sub 15 pin cabl\f REMOTE CONTROL IN RS-232C IN RS-232C IN(CONTR (CONTR OL & SER SERVICE) VICE) HDMI IN AUDIO OUT UDIO OUTVARIABLE RGB IN RGB IN(PC/DTV) AUDIO IN (RGB) RGB-PC OUTPUT PC SOUND PC 12 Conne\ft the TV to the PC with the PC \fable. Conne\ft the PC audio putput to the TV’s A A U U D D I IO O IIN N ( ( R R G G B B) ) input. Turn on the PC. 1 2 3 Sele\ft RGB [PC] input sour\fe with using the I I N N P PU U T T but- ton on the remote \fontrol.4 Ofrecido por www.electromanuales.com