LG 29ub65-p User Manual

11
ENGENGLISH
ASSEMBLING AND PREPARING
yyTo	protect 	the 	screen 	from 	scratches, 	cover	
the	surface	with	a	soft	cloth.
CAUTION
1	 Place	the	screen	face	down.
29UB65
yyThe	components	in	the	illustrations	may	dif-
fer	from	the	actual	product.
yyDo 	not 	carry 	the 	monitor 	upside 	down, 	as 	this	
may	cause	it	to	fall	off	its	stand	and	result	in	
damage	or	injury.
yyTo	avoid	damaging	the	screen	when	lifting	
or	moving	the	monitor,	only	hold	the	stand	or	
the	plastic	cover.	 This	avoids	putting	unnec-...

12
ENGENGLISH
ASSEMBLING AND PREPARING
Installing onto a table
1	 Lift	the	monitor	and	place	it	on	the	table	in	an	
upright	position.
Place	at	least	10 cm	away	from	the	wall	to	
ensure	sufficient	ventilation.
2	 Connect	the	adapter	to	the	monitor,	then	plug	
the	power	cord	into	the	power	outlet.
3	 Press	the		(Power)	button	on	the	bottom	of	
the	monitor	to	turn	it	on.
yyUnplug	the	power	cord	prior	to	moving	or	
installing	the	monitor.	There	is	risk	of	electric	
shock.
CAUTION
29UM65
29UM65
29UB65
 10	cm...

13
ENGENGLISH
ASSEMBLING AND PREPARING
yyOnce	the	pin	is	removed,	it	is	not	necessary	
to	re-insert	it	to	adjust	the	height.	
Adjusting the stand height
2	 Remove	the	tape attached to the bottom 
back of the stand body and then pull out the 
locking pin while pressing the head down-
ward.
3	 The	height	can	be	adjusted	up	to	110.0 mm.	
yyDo	not	put	your	fingers	or	
hand	between	the	screen	
and	the	base	(chassis)	when	
adjusting	the	screen's	height.
Tape
Locking Pin
Stand Body
CAUTION
WARNING
Head...

14
ENGENGLISH
ASSEMBLING AND PREPARING
Adjusting the angle
1	Place	the	monitor	in	an	upright	position,	mount-
ed	on	the	stand	base.	
2	 Adjust	the 	angle 	of 	the 	screen. 	The 	angle 	of 	the	
screen	can	be	adjusted	forwards	or	backwards	
for	a	comfortable	viewing	experience.
yyTo	avoid	injury	to	the	fingers	when	adjusting	
the	screen,	do	not	hold	the	lower	part	of	the	
monitor's	frame	as	illustrated	below.
yyBe	careful	not	to	touch	or	press	the	screen	
area	when	adjusting	the	angle	of	the	monitor....

15
ENGENGLISH
ASSEMBLING AND PREPARING
yyTo	avoid	scratching	the	stand	base,	make	
sure	that	when	rotating	the	monitor	using	
the	pivot	feature,	the	stand	does	not	make	
contact	with	the	monitor.
WARNING
Pivot feature
The	pivot	feature	allows	the	monitor	to	rotate	90	
clockwise.
29UB65
1	 Raise	the	monitor	up	to	the	maximum	height.
2	 Adjust	the	angle	of	the	monitor	in	the	direction	
of	the	arrow	as	shown	in	the	figure.
3	Rotate	the	monitor	clockwise	as	shown	in	the	
figure.
4	Complete	the	installation...

16
ENGENGLISH
ASSEMBLING AND PREPARING
Installing the wall mount plate
This	monitor	supports	the	specification	of	the	stan-
dard	wall	mount	plate	or	compatible	device.	
1	 Place	the	screen	face	down.	To	protect	the	
screen	from	scratches,	cover	the	surface	with	a	
soft	cloth.
2	 Place	the	wall	mount	plate	onto	the	monitor	
and	align	it	with	the	screw	holes.
3	 Using	a	screwdriver,	tighten	the	four	screws	to	
fix	the	plate	onto	the	monitor.
yyThe	wall	mount	plate	is	sold	separately.	
yyFor	more...

17
ENGENGLISH
ASSEMBLING AND PREPARING
To	install	the	monitor	to	a	wall,	attach	a	wall	mount-
ing	bracket	(optional)	to	the	back	of	the	monitor.
Make	sure	that	the	wall	mounting	bracket	is	securely	
fixed	to	the	monitor	and	to	the	wall.
1	Use	the	screws	and	wall	mounting	bracket	that	
comply	with	the	VESA	standard.
2	Screws	which	are	longer	than	the	standard	
length	may	damage	the	inside	of	the	monitor.
3	A 	non-VESA 	standard	screw	may	damage	the	
product	and	cause	the	monitor	to	fall.	LG	Elec-
tronics...

18
ENGENGLISH
USING THE MONITOR
USING THE MONITOR
Connecting to a PC
yyThis	monitor	supports	the	*Plug	and	Play	
feature.
*Plug	and	Play:	A	feature	that	allows	you	to	
add	a	device	to	your	computer	without	having	
to	reconfigure	anything	or	install	any	manual	
drivers.
DVI connection
Transmits	digital	video	signals	to	the	monitor.	Con-
nect	the	monitor	using	the	DVI	cable	as	illustrated	
below.
Press	the	menu	button	and	then	select	the	input	
option	from	the	input	menu.
To	hear	the	sound	in	DVI	input...

19
ENGENGLISH
USING THE MONITOR
yyThere	may	be	no	video	or	audio	output	de-
pending	on	the	DP	version	of	the	PC.
yyThe	DisplayPort	cable	may	not	be	available	
in	some	areas.
DisplayPort connection
Transmits	the	digital	video	and	audio	signals	from	
your	PC	to	the	monitor.	Connect	your	PC	to	the	
monitor	using	the	display	port	cable	as	illustrated	
below.
Press	the	menu	button	and	then	select	the	input	
option	from	the	input	menu.
NOTE
HDMI connection
Transmits	the	digital	video	and	audio	signals	from...

20
ENGENGLISH
USING THE MONITOR
Connecting to AV Devices
HDMI connection
Transmits	the	digital	video	and	audio	signals	from	
your	PC	and	A/V	devices	to	the	monitor.	Connect	
your	PC	and	AV	device	to	the	monitor	with	the	
HDMI	cable	as	illustrated	below.
Press	the	menu	button	and	then	select	the	input	
option	from	the	input	menu.
yyUsing	a	DVI	to	HDMI	cable	may	cause	com-
patibility	issues.
NOTE
29UM65
29UB65
(sold	separately)
(sold	separately)