LG 26lv2540 Owners Manual

							21
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system (This feature is
not available for all models.)
 yImage shown may differ from your TV.
The Kensington security system connector is 
located at the rear of the TV. For more information 
of installation and using, refer to the manual 
provided with the Kensington security system or 
visit http://www.kensington.com.
Connect the Kensington security system cable 
between the TV and a table.
Mounting on a wall
Attach a wall mount bracket at the rear of the TV 
carefully and install the wall mount bracket on a 
solid wall perpendicular to the floor. When you 
attach the TV to other building materials, please 
contact qualified personnel.
LG recommends that wall mounting be performed 
by a qualified professional installer.
Securing the TV to a wall
 yImage shown may differ from your TV.
1 Insert and tighten the eye-bolts, or TV brackets 
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts 
position, remove the bolts first.
2  Mount the wall brackets with the bolts to the 
wall.
Match the location of the wall bracket and the 
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly 
with a sturdy rope.
Make sure to keep the rope horizontal with the 
flat surface.
 y 
Use a platform or cabinet that is strong 
and large enough to support the TV 
securely.
NOTE
 yMake sure that children do not climb on 
or hang on the TV.
CAUTION
10 cm
10 cm
10 cm
10 cm
  
						

							22
ENGENGLISH
ASSEMBLING AND PREPARING
Make sure to use screws and wall mount 
bracket that meet the VESA standard. Standard 
dimensions for the wall mount kits are described in 
the following table.
Model42PT25**42/50PT35**50PV35**50PZ25**42/50PW45**50PZ55**42/50PT45**
60PV25**60PZ25**60PZ55**
VESA (A x B)400 x 400600 x 400
Standard screwM6M8
Number of screws44
Wall mount bracketPSW400B, PSW400BG, DSW400BG
PSW600B, PSW600BG
Model22LK33**19/22/26LV25**22/26LV55**19/22LV23**
26/32LK33**32LK43**32LK45**32LK53**32LK55**32LV25**32LV35**32LV45**32LW45**32LV34**
VESA (A x B)100 x 100200 x 100
Standard screwM4M4
Number of screws44
Wall mount bracketLSW100B, LSW100BG
Model37/42LK43**37/42LK45**42LK55**42/47LK53**37LV35**37LV45**
40/42/47LV35**42/47LV45**42/47/55LW45**
VESA (A x B)200 x 200400 x 400
Standard screwM6M6
Number of screws44
Wall mount bracketLSW200B, LSW200BGLSW400B, LSW400BG,
Separate purchase(Wall Mounting Bracket)
 y 
Disconnect the power first, and then move 
or install the TV. Otherwise electric shock 
may occur.
 yIf you install the TV on a ceiling or slanted 
wall, it may fall and result in severe injury. 
Use an authorized LG wall mount bracket 
and contact the local dealer or qualified 
personnel.
 y 
Do not over tighten the screws as this may 
cause damage to the TV and void your 
warranty. 
 y 
Use the screws and wall mount bracket that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
CAUTION
 y 
Use the screws that are listed on the 
VESA standard screw specifications. 
 y 
The wall mount kit includes an installation 
manual and necessary parts.
 y 
The length of screws may differ 
depending on the wall mount. Make sure 
to use the proper length.
 y 
For more information, refer to the manual 
supplied with the wall mount bracket.
NOTE
Model42LV34**
VESA (A x B)400 x 400
Standard screwM6
Number of screws4
Wall mount bracketLSW400BX,LSW400BXG
  
						

							23
ENGENGLISH
ASSEMBLING AND PREPARING
(Only 26/32LK33**, 32/37/42LK43**, 
32/37/42LK45**,  32/42/47LK53**, 32/42LK55**)
1 Gather and bind the cables with the cable 
management clip. 
2 Fix the cable management clip firmly to the TV.
 yDo not move the TV by holding the 
cable management clip, as the cable 
management clip may break, and injuries 
and damage to the TV may occur.
NOTE
(Only 22LK33**, 19/22/26LV25**, 22/26LV55**, 
19/22LV23**)
Cable Management Clip
Cable Holder
2 Gather and bind the cables with the Cable 
Holder. Install the LAN cable as shown to reduce 
the electromagnetic wave(Only 50PV350T, 
50/60PZ250T, 42/50PW450T, 42/50PW451T, 
50/60PZ550T).
 yDo not move the TV by holding the Cable 
Holder & Power Cord Holder, as the 
Cable holders may break, and injuries 
and damage to the TV may occur. 
CAUTIONCable Holder
Tidying cables
 yImage shown may differ from your TV.
(Only 42PT25**, 60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**, 42/50PT45**)
1 Install the Power Cord Holder and Power 
Cord. It will help prevent the power cable from 
being removed by accident.
Power Cord Holder
1 After connecting the cables as necessary, 
install Cable Holder as shown and bundle the 
cables. 
  
						

							24
ENGENGLISH
ASSEMBLING AND PREPARING
Positioning your display
Adjust the position of the panel in various ways for 
maximum comfort.
• Tilt range
Connection of TV
DC Adapter
1 Connect the antenna cable to the antenna 
input port on the TV.
2 Connect the DC adapter plug to the power 
input jack on the TV.
3  
Connect the power cord to the DC adapter first, 
then plug the power cord into the wall power 
outlet.
 yImage shown may differ from your TV.
(Only 19/22/26LV25**, 22/26LV55**, 19/22LV23**)
(Only 22LK33**)
 yImage shown may differ from your TV.
1   Gather and bind the cables with the Cable 
Holder on the TV back cover.
(Only 32LV25**, 32/37/40/42/47LV35**, 
32/42/47/55LW45**, 32/37/42/47LV45**, 
32/42LV34**)
Cable Holder
  
						

							25
ENGENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote c\
ontrol. 
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
 and  ends to the label inside the compartment, and close the battery cover. Be 
sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
 yDo not mix old and new batteries, as this may damage the remote control.\
CAUTION
(POWER) Turns the TV on or off.
ENERGY SAVING (See p.66)Adjusts the brightness of the screen to reduce energy consumption .
AV MODE (See p.43)Selects an AV mode.
INPUT (See p.43)Changes the input source; Turns the TV on .
TV/RADSelects Radio, TV and DTV programme.
LIGHTIlluminates the remote control buttons.
Number buttonsEnters numbers.
LIST (See p.38)Accesses the saved  programme list.
Q.VIEW Returns to the previously viewed programme.
  
						

							26
ENGENGLISH
REMOTE CONTROL
 + -Adjusts the volume level.
MARKSelects a menu or option.
FAV (See p.38)Accesses your favourite programme list.
3D(Only 3D Models)(See p.48)Used for viewing 3D video.
RATIO (See p.41)Resizes an image.
MUTEMutes all sounds.
P Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
CHAR/NUMSwitches between Letter and Number input modes.
DELETEDeletes letters and numbers.
  
						

							27
ENGENGLISH
REMOTE CONTROL
Coloured buttons These buttons are used for teletext (on TELETEXT models only), Programme edit.3D SETTING(Only 3D Models)Use this to view 3D video.
GUIDE
Shows programme guide.
HomeAccesses the main menus.
Q. MENU (See p.45)Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OKSelects menus or options and confirms your input.
BACKReturns to the previous level.
INFO (See p.39)Views the information of the current programme and screen.
EXITClears all on-screen displays and return to TV viewing.
TELETEXT BUTTONS (See p.89)These buttons are used for teletext.For further details, see the ‘Teletext’ section.
  
						

							28
ENGENGLISH
REMOTE CONTROL
SUBTITLERecalls your preferred subtitle in digital mode.
Control buttons( , , , , )Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB,SIMPLINK).FREEZEFreezes the current frame while using the TV, AV, Component, RGB-PC, or HDMI input source.
SIMPLINK (See p.88) Accesses the AV devices connected to the TV;  Opens the SIMPLINK menu.
ADSwitches the Audio Description On or Off.
RATIO (See p.41)Resizes an image.
  
						

							29
ENGENGLISH
WATCHING TV
WATCHING TV
 yFor optimum picture quality, adjust 
antenna direction.
 yIn poor signal areas, to achieve better 
picture quality it may be necessary to 
install a signal amplifier to the antenna.
 yIf the image quality is poor with an 
antenna connected, aim the antenna to 
the correct direction.
 yAn antenna cable and converter are not 
supplied.
NOTE
Turning the TV on for the first 
time
When you turn the TV on for the first time, the 
Initial setting screen appears. Select a language 
and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press (POWER) to turn the TV 
on. 
The Initial setting screen appears if you turn 
the TV on for the first time.
 yYou can also access Factory Reset by 
accessing OPTION in the main menus. 
NOTE
Wall Antenna 
Socket
Connecting an antenna
Connect an antenna to watch TV while referring to 
the following. 
To prevent damage do not connect to the mains 
outlet until all connections are made between the 
devices.
Connect the TV to a wall antenna socket with an 
RF cable (75 Ω).
3 Follow the on-screen instructions to customize 
your TV settings according to your preferences.
Selects a language to display.
Selects Home Use for the home environment.
Sets the power indicator.(When you select Home Use from Mode Setting - only LED LCD TV)
Selects a country to display. (Depending on model)
Language

Mode Setting

Power Indicator

Country

Time Zone

Set Password

Auto Tuning
Selects the time zone and daylight saving.(When Russia is selected for Country)
Scans and saves available programmes automatically.
Set the password.
(When France is selected for Country)
  
						

							30
ENGENGLISH
WATCHING TV
 yFor those countries without confirmed 
DTV broadcasting standards, some DTV 
features might not work, depending on 
the DTV broadcasting environment.
 yWhen France is selected for Country, 
password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, 
‘3’, ‘4’.
NOTE
4 When the basic settings are complete, 
press OK.
 yIf you do not complete the Initial setting, it 
will appear whenever the TV turns on.
 yDisconnect the power cord from the 
power outlet when you do not use the TV 
for a long period of time.
NOTE
5 To turn the TV off, press (POWER). 
Watching TV
1 In Standby mode, press (POWER) to turn the 
TV on.
2 Press INPUT and select Antenna.
3 To turn the TV off, press (POWER).
The TV switches to Standby mode.
Managing programmes
Selecting Antenna,
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously 
stored service information will be deleted.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
4 Press the Navigation buttons to scroll to 
Antenna and press OK.
5 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
6 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Automatically setting up pro-
gramme
NOTE
 yIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yYou can store up to 1,000 programmes. The number of programmes that you can store differs depending on the broadcasting signal environment. y Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. yWhen select Italy in the Country menu, if the pop up is displayed when the conflicted pro-gramme after Auto Tuning, select a broad-caster for conflicting programme number to solve. yIn the following country, DVB cable can be 
used : Germany, Netherlands, Sweden, Switzerland, Denmark, Austria, Finland, Norway, Slovenia, Hungary, Ukraine, Ireland, Poland, Romania, Spain, Bulgaria, Russia, Lithuania, Estonia, Latvia. (The supported country can be added.) yIn the following country, Digital TV can not be used : Bosnia, Kazakhstan. (Only Plasma TV).
(Except for 22/26/32LK335C, 32/37/42LK455C, 
19/22/26/32LV255C, 32/37/42/47LV355C)