LG 26LG4000 Owners Manual

							79
SOUND & LANGUAGE CONTROL
Auto Volume : Off
Balance 0
Sound Mode : Standard
• 120Hz 0
• 200Hz 0
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
AUDIOMoveOK
E
Balance 0
Auto Volume : Off
Balance 0
Sound Mode : Standard
• 120Hz 0
• 200Hz 0
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
AUDIOMoveOK
E
Balance 0
You can adjust the sound balance of the speakers to preferred levels.
BALANCE
Select AUDIO.
2
Select Balance.
1
3
Make desired adjustment.
Close
• 
Balance   0LRF FG
G
MENU
OK 
OK 
LR
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
-+
-+
-+
-+
-+
-+
-+
-+
-+
 Ofrecido por www.electromanuales.com
 
						

							80
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the internal speaker status.
In AV, COMPONENT, RG Band HDMI1with HDMI to DVI cable, the TV speaker can be operational even when
there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
Select AUDIO.
Select TV Speaker.
3
Select Onor Off.
1
2
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
Digital Audio Out: PCM
TV Speaker : Off
AUDIOMoveOKD
TV Speaker       : Off
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
Digital Audio Out: PCM
TV Speaker : Off
AUDIOMoveOKD
TV Speaker       : OffOff
OnOff
MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
 Ofrecido por www.electromanuales.com
 
						

							81
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to
Dolby Digital 
If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM.
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio,
only Dolby Digital will be played.
Select AUDIO.
Select D Di
ig
gi
it
ta
al
l 
 A
Au
ud
di
io
o 
 O
Ou
ut
t
.
3Select D Do
ol
lb
by
y 
 D
Di
ig
gi
it
ta
al
l
or
P PC
CM
M
.
1
2
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
Digital Audio Out: PCM
TV Speaker : Off
AUDIOMoveOKD
Digital Audio Out: PCM
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
Digital Audio Out: PCM
TV Speaker : Off
AUDIOMoveOKD
Digital Audio Out: PCMDolby Digital
PCM
PCM
MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
Manufactured under license from
Dolby Laboratories. “Dolby“and
the double-D symbol are trade-
marks of Dolby Laboratories.
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital
audio of the DVD player to PCM.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
 Ofrecido por www.electromanuales.com
 
						

							82
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
• 120Hz 0
• 200Hz 0
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
AUDIOMoveOKD
• Reset
• 120Hz 0
• 200Hz 0
• 500Hz 0
• 1.2KHz 0
• 3KHz 0
• 7.5KHz 0
• 12KHz 0
• Reset
AUDIOMoveOKD
• Reset
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
Select AUDIO.
2
Select Reset.
3
Initialize the adjusted value.
1
Resetting sound mode configuration...i
i
MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
 Ofrecido por www.electromanuales.com
 
						

							83
SOUND & LANGUAGE CONTROL
I/II
A AM
Mo
on
no
o 
 s
so
ou
un
nd
d 
 s
se
el
le
ec
ct
ti
io
on
n
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
A AL
La
an
ng
gu
ua
ag
ge
e 
 s
se
el
le
ec
ct
ti
io
on
n 
 f
fo
or
r 
 d
du
ua
al
l 
 l
la
an
ng
gu
ua
ag
ge
e 
 b
br
ro
oa
ad
dc
ca
as
st
t
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL ISends the primary broadcast language to the loudspeakers.
DUAL IISends the secondary broadcast language to the  loudspeakers.
DUAL I+IISends a separate language to each loudspeaker.
Broadcast
Mono
Stereo
DualOn Screen Display
MONO
STEREO
D DU
UA
AL
L 
 I
I,
, 
 D
DU
UA
AL
L 
 I
II
I,
, 
 D
DU
UA
AL
L 
 I
I+
+I
II
I
Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears after the programme number
and station name disappear.
Select AUDIO.
2
Select the sound output.
1Q. MENU
OK 
 Ofrecido por www.electromanuales.com
 
						

							84
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
NICAM Reception (In Analogue Mode Only)
When NICAM monois received, you can select N NI
IC
CA
AM
M 
 M
MO
ON
NO
O
or F FM
M 
 M
MO
ON
NO
O
.
When NICAM stereois received, you can select N NI
IC
CA
AM
M 
 S
ST
TE
ER
RE
EO
O
or F FM
M 
 M
MO
ON
NO
O
. 
If the stereo signal is weak, switch to F FM
M 
 m
mo
on
no
o
.
When NICAM dualis received, you can select N NI
IC
CA
AM
M 
 D
DU
UA
AL
L 
 I
I
, N NI
IC
CA
AM
M 
 D
DU
UA
AL
L 
 I
II
I
or 
N NI
IC
CA
AM
M 
 D
DU
UA
AL
L 
 I
I+
+I
II
I
or F FM
M 
 M
MO
ON
NO
O
.
If the TV is equipped with a receiver for NICAM reception,  high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right
loudspeakers.
Select the sound output.
L+R:Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R:Audio signal from audio R input is sent to left and right loudspeakers.
1
2
3
 Ofrecido por www.electromanuales.com
 
						

							85
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE / 
COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
* * 
 I
If
f 
 y
yo
ou
u 
 w
wa
an
nt
t 
 t
to
o 
 c
ch
ha
an
ng
ge
e 
 L
La
an
ng
gu
ua
ag
ge
e/
/ 
 C
Co
ou
un
nt
tr
ry
y 
 s
se
el
le
ec
ct
ti
io
on
n
NOTE!
G GIf you do not finish the set-up Installation Guide by pressing RETURNor if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on
G GIf you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
G GThe CI (Common Interface) function may not be applied based on country broadcasting circumstances.
G
GDTV mode control buttons may not function based on country broadcasting circumstances.
G
GIn country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending
on digital broadcasting circumstances.
G GThe Country Setting “UK” should only be activated UK.S
elect your desired language.
2
Select your country.
1
Select OPTION.
2
Select Menu Languageor Country.
1
3
Select your desired language or country. 
4
Save.
OK 
OK 
MENU
OK 
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							86
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected lan-
guage is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not supported,
you can select language in secondary category. 
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
< Audio Language Selection >
G GWhen two or more audio languages are broadcast, you can
select the audio language.
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
Audio Language OSD Information
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired” Display
N.A
< Subtitle Language Selection >
G GWhen two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLEbutton
on the remote control.
G GPress the  button to select a subtitle language.
Subtitle Language OSD Information
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing” Display
N.A
Select OPTION.
2Select Audio Language, Subtitle
Language
. 
1
3Select your desired language.
4
Save.
MENU
OK 
OK 
OK 
Select OPTION.
2Select Hard of
Hearing( )
. 
1
3Select On or Off.
MENU
OK 
OK 
• Press the RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							87
TIME SETTING
TIME SETTING
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Sleep : Off
Time Zone : Canary GMT
TIMEMoveOK
Clock
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no
DTV signal.)
You must set the time correctly before using on/off timer function.
CLOCK SETUP
Select TIME.
2
Select Clock.
1
3Select either the year, date, or time
option.
4Set the year, date, and time options.
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Sleep : Off
Time Zone : Canary GMT
TIMEMoveOK
ClockDate06
MonthMar.
Ye a r20 07
Hour04
Minute45
Close
MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							88
TIME SETTING
TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
AUTO ON/OFF TIMER SETTING
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Sleep : Off
Time Zone : Canary GMT
TIMEMoveOK
On Time Off
Select TIME.
2
Select Off timeor On time.
1
3Select Repeat.
5Set the hour.
6Set the minutes.
4Select Off, Once, Daily, Mon ~Fri, Mon
~Sat
, Sat ~Sunor Sun.
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Sleep : Off
Time Zone : Canary GMT
TIMEMoveOK
On Time : OffRepeatF F 
  
  
  
  
  
 Off       G
G
Hour04
Minute45
ModeDTV
Programme800
Volume30
Close
• To cancel On/Off Timefunction, select Off.
• For On Time function only
1Select Mode.
2
Select TV, DTV or Radio.
3
Set the programme.
4Adjust volume level at
switch-on.
MENU
OK 
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
1/Mar. 2007 16:09
 Ofrecido por www.electromanuales.com