LG 26le5510 Owners Manual

							
43
WATCHING TV / PROGRAMME CONTROL
•  Antenna  or Cable  : Select it when watch-
ing the DTV/RADIO/TV.
•   
USB :  Select it when using USB depends 
on connector.
•   
AV  : Select it when watching the VCR or 
external equipment.
•   Component  : Select it when using the 
DVD or the Digital set-top box depends on 
connector.
•   RGB  :Select it when using PC depends on 
connector.
•   HDMI  : Select it when using DVD, PC or 
Digital set-top box depend on connector.
INPUT LIST
HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an exte\
rnal 
device approves voltage.
By using  TV/RAD button, you can move from External Input to RF Input and to the last wa\
tched pro-
gramme in DTV/RADIO/TV mode. 
1Select the input source.
AntennaUSB
HDMI2HDMI3HDMI4HDMI1
AV 1AV 2Component
RGB
OK
MoveInput List
Input LabelExit
AV 3
 
■ Image shown may differ from your TV.
 
						

							
44
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.• 
Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select Input Label .
2Select the source.
3Select the label.
BLUE
Input Label
AV 1
AV 2
AV 3
Component
RGB
Close
▼
◄►
◄►
◄►
◄►
◄►
AntennaUSB
HDMI2HDMI3HDMI4HDMI1
AV 1AV 2Component
RGB
OK
MoveInput List
Input LabelExit
AV 3
 
■ Image shown may differ from your TV.
 
						

							
45
WATCHING TV / PROGRAMME CONTROL
OK
Move
●
 Language(Language)● Country : Ireland● Disability Assistance● Power Indicator ● Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●●  MdMdMdModeModeModeModeModeModeModeModeModeModeStStStSetSetSetSetSetSetSetSet Set SettitititingtingtingtingtingtingtingtingtingtingggggHHH:H:H:H:H:H:H:H:H : H : Homeomeomeomeomeomeomeomeome ome UUUUseUseUseUseUseUseUseUseUseUse
OPTION
● Data Service  : MHEG
DATA SERVICE
(This menu is enabled only in Ireland. )
This function allow users to choose between  MHEG(Digital Teletext) and Teletext  if both exist at the same 
time.
If only one of them exists, either  MHEG or Teletext  is enabled regardless of which option you select-
ed.
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select OPTION .
2Select Data Service .
3Select MHEG  or Teletext .
4Save.
OK
Move
●
 Language(Language)● Country : Ireland● Disability Assistance● Power Indicator ● Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●●  MdMdMdModeModeModeModeModeModeModeModeModeModeStStStSetSetSetSetSetSetSetSet Set SettitititingtingtingtingtingtingtingtingtingtingggggHHH:H:H:H:H:H:H:H:H : H : Homeomeomeomeomeomeomeomeome ome UUUUseUseUseUseUseUseUseUseUseUse
OPTION
● Data Service  : MHEGMHEG
TeletextMHEG►►►
 
						

							
46
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HD\
MI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable with-
out additional cables and settings.
If you do not want SIMPLINK menu,select “Off”.
In wireless external output, SIMPLINK function is not supported.
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Display the  SIMPLINK.
2Select On or Off.
3Save.
◄     On      ►
Watch TV
DISC
VCR
VCR
SpeakerTV Speaker
HDD Recorder
◄►
OKExit
 
						

							
47
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
NOTE
 
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK 
device with the HDMI cable. 
 
► When you switch the Input source using the INPUT button on the remote control, you can stop the opera-
tion of a device controlled by SIMPLINK.
 
►  When you select or operate a media device with 
home theater function, the speaker automatically 
switches to home theater speaker (HT speaker).
1Connect the HDMI/DVI IN 1 , HDMI IN 2 
(Except for 19/22LD3 ***), 
HDMI IN 3  (Except 
for 19/22/26/32LD3 ***, 32/37/42/47LD4
***, 
19/22LE3 ***, 22LE5
***) or 
HDMI IN 4  (Only 
32LE3 ***, 32/42/47LE4
***, 
32/37/42/47/55LE5 ***)
 
terminal on the back of 
the TV and the HDMI output terminal of the 
Home Theater using HDMI cables.
2Connect the Digital Audio output terminal on 
the back of the TV and the Digital Audio input 
terminal of the Home Theater using optical 
cables.
3Select Home Theater in the Speaker menu by 
pushing the  SIMPLINK button.
    
12
Home Theater
 
						

							
48
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
       
Disc playback
Control connected AV devices by pressing the        
        , OK, ►, 
▀ , 
l l , ◄◄  and  ►►
 buttons.
Direct Play 
After connecting AV devices to the TV, you can directly control the devices and play media without additional\
 set-
tings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out 
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts\
 to play, The TV will change automatically 
to turn on mode.
*  A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, 
does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should b\
e used.
(*CEC: Consumer Electronics Control).
SIMPLINK Functions
 
						

							
49
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Menu 
Press the               button and then OK button to select the desired SIMPLINK source.
TV viewing :  Switch to the previous TV pro-
gramme regardless of the current mode.
DISC playback :  Select and play connected 
discs.
When multiple discs are available, the device 
type of discs are conveniently displayed at 
the bottom of the screen.
VCR playback :  Play and control the con-
nected VCR.
  HDD Recordings playback :  Play and con-
trol recordings stored in HDD.
  Audio Out to Home theater/Audio Out to 
TV:  Select Home theater or TV speaker for 
Audio Out.
1
2
3
4
5
• Home theater: Only one supported at a time
• DVD, Recorder: Up to one(Only 19/22LD3 ***), two(Only 26/32LD3
***, 32/37/42/47LD4
***, 
19/22LE3 ***, 22LE5
***), three(Only 32/42/46/52/60LD5
***, 26LE3
***, 26LE5
***), four(Only 32LE3
***, 
32/37/42LE4 ***, 32/37/42/47/55LE5
***) supported at a time.
• VCR: Only one supported at a time
◄      On      ►
Watch TV
DISC
VCR
VCR
SpeakerTV Speaker
HDD Recorder
◄►
OKExit
Selected Device
When a device is con-
nected (displayed in 
bright colour)
When device is not con-
nected (displayed in 
gray)
1
2
3
4
5
 
						

							
50
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
OffCinema
GameSport
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off  Disables the AV MODE.
Cinema   Optimizes video and audio for watching movies.
Sport   Optimizes video and audio for watching sports events.
Game   Optimizes video and audio for playing games.
• If you select  Cinema in AV mode,  Cinema will be selected both for 
Picture Mode  and Sound Mode  in PICTURE  menu and  AUDIO menu 
respectively.
• If you select “ Off” in AV mode, the picture and image which you initially 
set will be selected. 
• When playing a video game using PlayStation or Xbox, it is recom- mended to use the  Game mode.
• When in  Game mode, functions related to picture quality will be opti-
mized for playing games.
1AV MODE Press the  AV MODE button repeatedly to select the desired source.
2
 
						

							
51
WATCHING TV / PROGRAMME CONTROL
OK
Move
●
 Language(Language)● Country : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Factory Reset
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings. 
But the settings of        Day  and        Night  of the  Picture Mode  cannot be initialized.
It is useful to initialize the product or when you move to other city or\
 country.
When the Factory Reset is completed, you must restart the Initializing s\
etup. 
When the  Lock System  menu is On, the message to enter the password appears.
Ye s No
All user settings and channel settings will 
be reset. Still Continue?
• Press the 
MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• In Lock System  On , if you forget your 
password, press 0, 3, 2, 5 on the 
remote control hands et.1Select  OPTION .
2Select Factory Reset .
3Select Ye s.
4Start Factory Reset.
OK
Move
●
 Language(Language)● Country : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Factory Reset►►
 
						

							
52
TO USE A USB DEVICE 
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatica\
lly.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Sch\
edule list is activat-
ed.
When the Pop Up menu appears, you can select Music List, Photo List or M\
ovie List in the MY MEDIA 
menu.
In USB device, you can not add a new folder or delete the existing folde\
r.
When removing the USB device
  Connect the USB device to the USB IN 
jack on the TV.
3
Select  Movie List  (Only 
19/22/26/32LE3***, 32/37/42LE4***, 
22/26LE5***, 32/37/42/47/55LE5***, 
32/42/46/52/60LD56**, 
32/37/42/47LD46**, 
32/42/46/52/60LD555, 32/3742/47LD455, 
19/22/26/32LD355, 19/22/26/32LD356, 
19/22/26/32LD345, 19/22/26/32LD346 
32/37/42/47LD425, 32/37/42/47LD426, 
26/32LD335, 26/32LD336),  Photo List or 
Music List .
1
Select the USB Device menu before removing 
the USB device.
2
•  Only photo(JPEG), music (MP3) and movie 
(DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,T
S,TRP,TP,ASF,WMV,FLV) are supported.
Movie ListMusic ListPhoto List
MY MEDIA
Exit
OptionPress OK(     ) to see photos from the USB.
1Select 
USB Device .
2Select Eject.
or