LG 26le5510 Owners Manual

13
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Reset.
4
Select  Ye s.
5Run  Reset .
To Set
Auto Config.
SCREENMove Prev.
Resolution
Position
Size
Phase
Reset
Ye sNo
OK
Move PICTURE
 ShShSh•Sh•Sh•ShShSh...

14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the 
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, \
and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in pr\
ogress.
Auto Configure (RGB [PC] mode only)
• Press the  MENU/EXIT...

15
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection \
of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Resolution .
4Select the desired resolution.
5
Auto Config.
SCREENMove Prev.
Resolution
Position
Size
Phase
Reset
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh...

16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if char\
acters are still trembling, adjust 
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE .
2Select Screen .
3Select Position , Size  or Phase .
4 Make appropriate...

17
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP 
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT PROGRAMME SELECTION
1If the OSD (On Screen Display) is displayed on the screen after turnin\
g on the TV, you can 
adjust the Language , Mode Setting , Power Indicator (When you select  Home Use from 
Mode Setting -  Only LED LCD TV MODELS),  Country or TimeZone  (When Russia is select-
ed for Country) or  Set...

18
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
  Aspect Ratio: Selects your desired picture for-
mat.
   For Zoom Setting, select 14:9, Zoom and  Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to 
Q.Menu.
  Clear Voice II  : By differentiating the human 
sound range from others, it helps users lis-
ten to human voices better.
  Picture Mode  : Selects your desired Picture 
Mode.
  Sound Mode  : It is a feature to automatical-
ly set the sound...

19
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual.
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
• Press the  RED button, you can check the 
Customer Support  menu.
• Press the  GREEN button, you can check 
the  Simple Manual  menu.
• 
Press the  MENU/EXIT  button to return to 
normal TV viewing.
• Press the  BACK button to move to the pre-
vious menu screen....

20
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING 
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service informati\
on will be deleted.
The maximum number of programmes that can be stored is 1,000. But the nu\
mber may differ slightly 
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable. 
If you want to select the Antenna,
•...

21
WATCHING TV / PROGRAMME CONTROL
If you want to select the Cable,
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP .
2Select Auto Tuning .
3
Select Cable.
4Select  Comhem or Other  
Operators .
5
Select Quick or Full .
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OK
Move
●
 ●  Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV...

22
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
 
■ When you select the Quick,
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network : Auto
OK
Close
Setting
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network : Auto
OK
Close
Setting
•   If you wish to keep on auto tuning, select 
Start  using the 
       button. Then, press 
the  OK button. Otherwise select  Close. 
•  Automatic Numbering : Decide whether 
to use the programme numbers as sent...