LG 26ld350 Owners Manual

							EXTERNAL EQUIPMENT SETUP
41
NOTES!
For 19/22/26/32LD350
Horizontal  Vertical 
Frequency(
KHz)
Frequency(
Hz)
31.469 70.08
31.469 70.08
31.469 59.94
37.879 60.31
48.363 60.00
47.776 59.87
47.720 59.799 Resolution 
720x400
1360x768640x480
800x600
1024x768
640x350
1280x768
Supported Display Specifications (RGB-PC, HDMI-PC)
G GTo  get  the  the  best  picture  quality,  adjust  the  PC
graphics card to 1360x768.
G
GDepending  on  the  graphics  card,  DOS  mode  may
not work if a HDMI to DVI Cable is in use.
G GIn  PC mode,  there  may  be  noise  associated  with
the resolution, vertical pattern, contrast or bright-
ness.  If  noise  is  present,  change  the  PC  output  to
another  resolution,  change  the  refresh  rate  to
another rate or adjust the brightness and contrast
on the PICTURE menu until the picture is clear.
G GAvoid  keeping  a  fixed  image  on  the  screen  for  a
long  period  of  time.  The  fixed  image  may  become
permanently imprinted on the screen.
G GThe synchronization input form for Horizontal and
Vertical frequencies is separate.
G GDepending  on  the  graphics  card,  some  resolution
settings may not allow the image to be positioned
on the screen properly.
G GIf  there  are  overscan  in  HDMI-PC  1920x1080,
change aspect ratio to J Ju
us
st
t 
 s
sc
ca
an
n
.
G GWhen  selecting  HDMI-PC,  set  the  “Input  Label  -
PC” in the OPTION menu.   
						

							EXTERNAL EQUIPMENT SETUP
42
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Selecting Resolution
You can choose the resolution in RGB-PC mode. 
The P Po
os
si
it
ti
io
on
n
, P Ph
ha
as
se
e
, and S Si
iz
ze
e
can also be adjusted.
You can use this function only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Select P PI
IC
CT
TU
UR
RE
E
.
Select S Sc
cr
re
ee
en
n 
 (
(R
RG
GB
B-
-P
PC
C)
)
.
Select R Re
es
so
ol
lu
ut
ti
io
on
n
.
Select the desired resolution.
1
MENU
3
4 2
ENTER
ENTER
ENTER
5
ENTER
Auto Config.
Resolution
Position
Size
Phase
Reset
SCREENMovePrev.
1024 x 768
1280 x 768
1360 x 768
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)  
						

							EXTERNAL EQUIPMENT SETUP
43
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Select S Sc
cr
re
ee
en
n 
 (
(R
RG
GB
B-
-P
PC
C)
)
.
Select A Au
ut
to
o 
 C
Co
on
nf
fi
ig
g.
.
.
Auto Config.
Resolution
Position
Size
Phase
Reset
SCREENMovePrev.
To Set
3 2
ENTER
ENTER
Select Y Ye
es
s
.
4
ENTER
Start Auto Configuration.
5
ENTER
Select P PI
IC
CT
TU
UR
RE
E
.
1
MENU
If  the  position  of  the  image  is  still  not
correct, try Auto adjustment again.
If  picture  needs  to  be  adjusted  again
after  Auto  adjustment  in  RGB-PC,  you
can  adjust  the P Po
os
si
it
ti
io
on
n
, S Si
iz
ze
e 
 
or
P Ph
ha
as
se
e
.
Ye sNo
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)  
						

							EXTERNAL EQUIPMENT SETUP
44
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, and Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
This feature operates only in RGB-PC mode.
Select P Po
os
si
it
ti
io
on
n
, S Si
iz
ze
e
, or P Ph
ha
as
se
e
.
Make appropriate adjustments.
Auto Config.
Resolution
Position
Size
Phase
Reset
G FD
E
SCREENMovePrev.
3
ENTER
4
ENTER
P Po
os
si
it
ti
io
on
n
: This function is to adjust pic-
ture  to  left/right  and  up/down  as  you
prefer. 
S Si
iz
ze
e
:  This  function  is  to  minimize  any
vertical  bars  or  stripes  visible  on  the
screen  background.  And  the  horizontal
screen size will also change.
P Ph
ha
as
se
e
:  This  function  allows  you  to
remove any horizontal noise and clear or
sharpen the image of characters. Select P PI
IC
CT
TU
UR
RE
E
.
Select S Sc
cr
re
ee
en
n 
 (
(R
RG
GB
B-
-P
PC
C)
)
.
1
MENU
2ENTER
5
ENTER
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)  
						

							EXTERNAL EQUIPMENT SETUP
45
Screen Reset (Reset to original factory values)
Returns P Po
os
si
it
ti
io
on
n
, S Si
iz
ze
e
, and P Ph
ha
as
se
e
to the default factory settings.
This feature operates only in RGB-PC mode.
Auto Config.
Position
Resolution
Size
Phase
Reset
SCREENMovePrev.
To Set
Select R Re
es
se
et
t
.3
ENTER
Select P PI
IC
CT
TU
UR
RE
E
.
Select S Sc
cr
re
ee
en
n 
 (
(R
RG
GB
B-
-P
PC
C)
)
.
1
MENU
2ENTER
Select Y Ye
es
s
.
4
ENTER
5
ENTER
Ye sNo
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)  
						

							WATCHING TV / CHANNEL CONTROL
46
REMOTE CONTROL FUNCTIONS
WATCHING TV / CHANNEL CONTROL
When using the remote control, aim it at the remote control sensor on the TV.
ENERGY
CH VOL
123
45
06
789
P
A
G
E
SAVING
TV
AV MODEINPUT
FAV
RATIO
MUTE
BACKEXIT
ENTER
MARK
LISTFLASHBK
MENU
INFOQ.MENU
POWER
ENERGY SAVING
AV MODE
INPUT
TV
VOLUME UP
/DOWN
MARK
FAV
RATIO
MUTE
CHANNEL
UP/DOWN
PA G E
UP/DOWN
COLOR BUTTONTurns the TV on from standby or off to standby.
Adjusts the Energy Saving. 
G Gp
p.
.8
84
4
Toggles through preset Video and Audio modes. G
Gp
p.
.6
62
2
Rotates through inputs. 
Also switches the TV on from standby. 
G Gp
p.
.6
60
0
Returns to the last TV channel.
Adjusts the volume.
Select the input to apply the Picture Wizard settings.
G Gp
p.
.7
77
7
Use to mark or unmark a photo/music.G
Gp
p.
.,
, 
 6
68
8,
, 
 7
72
2
Scroll through the programmed Favorite channels.G
Gp
p.
.5
58
8
Changes the aspect ratio.G
Gp
p.
.7
74
4
Switches the sound on or off. G
Gp
p.
.4
48
8
Changes the channel.
Moves  from  one  full  set  of  screen  information  to  the  next
one.
Controls USB menu (Photo List and Music List.)
Controls the SIMPLINK compatible devices.
USB, 
SIMPLINK  
Control buttons  
						

							WATCHING TV / CHANNEL CONTROL
47
Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.
Displays the channel table. 
G Gp
p.
.5
56
6
Tunes to the last channel viewed.
Displays the main menu or clears all on-screen displays and return to TV viewing.
Displays channel information at the top of the screen.
G Gp
p.
.5
59
9
Opens the list of Quick Menu options.G
Gp
p.
.5
52
2
Navigates the on-screen menus and adjusts the system settings to your preference.
Allows the user to move return one step in an interactive application or other user interaction
function.
See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK menu appears at the screen. 
G Gp
p.
.6
64
4
— (DASH)
LIST
FLASHBK
MENU
INFO
Q.MENU
THUMBSTICK
(Up/Down/Left
Right/ENTER)
RETURN
SIMPLINK
EXIT
NUMBER button
Open the battery compartment cover on the back side and install
the batteries matching correct polarity.
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
Close cover.
Installing Batteries  
						

							WATCHING TV / CHANNEL CONTROL
48
TURNING ON THE TV
WATCHING TV / CHANNEL CONTROL
NOTE!
G GIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.
G
GIf you do not complete the I In
ni
it
ti
ia
al
l 
 s
se
et
tt
ti
in
ng
g
, it will appear whenever the TV is switched on until the I In
ni
it
ti
ia
al
l
s se
et
tt
ti
in
ng
g 
 
procedure is completed.
G GIf the TV is unplugged once or turn off with the main power switchon the TV, reset the C Cl
lo
oc
ck
k
function. First, connect power cord correctly. 
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the , I IN
NP
PU
UT
T
,C CH
H(
(D
DE
Eor ) ) 
 
button on the TV or press
the P PO
OW
WE
ER
R
, I IN
NP
PU
UT
T
, C CH
H 
 (
(
or ) )
, N Nu
um
mb
be
er
r 
 (
(0
0
~9 9)
)
button on the remote control.
Select the viewing source by using the I IN
NP
PU
UT
T
button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the P PO
OW
WE
ER
R
button on the remote control. The TV reverts to standby
mode.
1
2
3
Press the C CH
H(
(
or ) )
or N NU
UM
MB
BE
ER
R
buttons to select a channel number.1
VOLUME ADJUSTMENT CHANNEL SELECTION
Press the V VO
OL
L(
(+
+ 
 
or - -)
)
button to adjust the volume.
If you want to switch the sound off, press theM MU
UT
TE
E
button. 
You can cancel the Mute function by pressing theM MU
UT
TE
E
or V VO
OL
L(
(+
+ 
 
or - -)
)
button.
Adjust the volume to suit your personal preference.
1
2
3  
						

							WATCHING TV / CHANNEL CONTROL
49
INITIAL SETTING
This  Function  guides  the  user  to  easily  set  the  essential  items  for  viewing  the  TV  for  the  first  time  when  pur-
chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti-
vated from the user menus.
Default selection is “H Ho
om
me
e 
 U
Us
se
e
”. We recommend setting the TV to “H Ho
om
me
e 
 U
Us
se
e
” mode for the best pic-
ture in your home environment.
“S St
to
or
re
e 
 D
De
em
mo
o
”  Mode  is  only  intended  for  use  in  retail  environments.  Customers  can  adjust  the  “P Pi
ic
ct
tu
ur
re
e
menu - P Pi
ic
ct
tu
ur
re
e 
 m
mo
od
de
e
” manually while inspecting the TV, but the TV will automatically return to preset in-
store mode after 5 minutes.
“S St
to
or
re
e 
 D
De
em
mo
o
”  Mode is  an  optimal  setting  for  displaying  at  stores.  “Store  Demo”  mode  initializes  the  TV
to set the image quality.
You can also adjust I In
ni
it
ti
ia
al
l 
 S
Se
et
tt
ti
in
ng
g
in the O OP
PT
TI
IO
ON
N 
 
menu.
Check your antenna connection and start
A Au
ut
to
o 
 T
Tu
un
ni
in
ng
g
.
1ENTER
Step3. Time setting
Step4. Auto Tuning
Language
Step1. Selecting Language
English
Español
Français
Selecting the environment.
Choose the setting mode you want.
Select [Home Use] to use this TV at home. 
To use this TV at Store, select [Store Demo].
Store DemoHome Use
Mode Setting
Step2. Mode setting
Next Previous
Next Previous
Select A Au
ut
to
o
or M Ma
an
nu
ua
al
l
.
Select desired time
option.1
2ENTER
Month
Current Time Setting
02
Date21
Year2009
Hour10 AM
Minute10
Time ZoneEastern
Daylight SavingAuto
F F 
  
  
  
  
  
 AutoG
G
Time Setting
Next Previous
Before starting,
be sure that the
TV antenna is connected.
Auto Tuning
NextSimple ManualPreviousINFOi
Select Menu Language.
1ENTER
Select H Ho
om
me
e 
 U
Us
se
e
.
1ENTER  
						

							WATCHING TV / CHANNEL CONTROL
50
ON-SCREEN MENUS SELECTION
WATCHING TV / CHANNEL CONTROL
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Display each menu.
Select a menu item.
Accept the current selection.
1
MENU
3 2
ENTER
ENTER
Return to TV viewing.
4
MENU
EnterMove
Auto Tuning
Manual Tuning
Channel Edit
CHANNEL
CHANNEL
TIME
PICTURE
OPTION
AUDIO
LOCK
EnterMove
Auto Volume : On
Clear Voice II : On
• Level 3
Balance 0
Sound Mode : Standard
• 
Infinite Sound :Off
• Treble 50
• Bass 50
AUDIO
LR-+
EnterMove
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
EnterMove
Lock System            : Off
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Downloadable Rating
Input Block
LOCKEnterMove
Menu Language : English
Audio Language : English
Input Label
SIMPLINK : On
Key Lock : Off
Simple Manual
Caption : Off
Set ID : 1
OPTION
Lock System            : Off
Set Password
Block Channel
TV Rating-English
TV Rating-French
Downloadable Rating
Input Block
For USA For Canada
EnterMove
Aspect Ratio : 16:9
Picture Wizard
Energy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70
PICTURE
EE
E
19/22/26LD350