LG 23ea63vp User Manual

							www.lg.com
OWNER’S MANUAL
IPS LED MONITOR
22EA63V
23EA63V
27EA63V Please read this manual carefully before operating 
your set and retain it for future reference.
IPS LED MONITOR MODEL
ENGLISH 
						

							2
ENGENGLISH
TABLE OF CONTENTS
Contents
3 AsseMBLInG AnD PRePAR-
InG
3  Unpacking
4  Parts and buttons
5  Setting up the Monitor set 
5  - Attaching the Stand Base
5  - Detaching the Stand Base 
6  - Mounting on a table
8  - Mounting on a wall
9  UsInG tHe MonItoR set
9  Connecting to a PC
9  - D-SUB connection
9  - DVI-D connection
9  - HDMI connection
11 CUstoMIZInG settInGs
12  Customizing Settings
12  - Menu Settings
13    - Picture
14    - Color
15    - Display
15    - Volume
16    - Others
17  MY KEY Setting
18  FUNC. Setting
18    - Picture Mode
19    - SUPER ENERGY SAVING 
20    - DUAL DISPLAY
20    - DUAL WEB
21    - MY KEY Setting
22  tRoUBLesHootInG
24  sPeCIFICA tIons  
24 22EA63V
25  23EA63V
26  27EA63V
27  Preset Modes (Resolution)
27  Indicator
28 PRoPeR PostURe
28  Proper posture for using the Monitor set.  
						

							3
ENGENGLISH
ASSEMBLING AND PREPARING
AsseMBLInG AnD PRePARInG
Unpacking
Check your product box for the following items. If there are any missing\
 accessories, contact the local 
dealer where you purchased your product. The illustrations in this manual may differ from the actual product 
and accessories. 
y Do not use any unapproved accessories to ensure the safety and product l\
ife span.
 
y Any damages or injuries by using unapproved accessories are not covered \
by the warranty. 
 
y The accessories supplied with your product may vary depending on the mod\
el.
 
y Product specifications or contents in this manual may be changed without prior notice due to upgrade 
of product functions.
CAUtIon
note
stand Body
stand Base
CD(owner's Manual) /
 Card D-sUB Cable
(This cable is not included in all  countries.) DVI-D Cable
(This cable is not included  in all countries.)
( Depending on the country ) ( Depending on the country )
Power CordAC-DC Adapter AC-DC Adapter
or   
						

							4
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
 
 
Power Indicator  
y Lighting 
on:  turned on
 
y Lighting 
off:  turned off
Connection panel (See p.9) Button (See p.11)
(Power Button)  
						

							5
ENGENGLISH
ASSEMBLING AND PREPARING
Attach the stand Body to the monitor set.
Attach the stand Base.
Tighten the screw to the right with a coin.
setting up the Monitor set 
Attaching the stand Base
1 Place the Monitor set with the screen side 
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth 
on the surface to protect the screen from 
damage.
CAUtIon
2 
stand Base
stand Body
1
2
3
Detaching the 
stand Base 
1  Place the Monitor set with the screen side 
down on a flat and cushioned surface.
stand Base
stand Base
stand Body
stand Body
Pull out the stand Body and stand Base 
from the monitor set.
Turn the screw to the left with a coin.
Pull out the stand Base.1
2
3
2   
						

							6
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the Monitor set into its upright 
position on a table.
Leave a 10 cm (minimum) space from the wall 
for proper ventilation.
2 Connect the AC-DC Adapter and Power Cord 
to a wall outlet.
3 Press (Power) button on the bottom switch 
panel to turn the power on.
10 cm 10 cm
10 cm
10 cm
Unplug the power cord before moving the 
Monitor to another location. Otherwise electric 
shock may occur.
CAUtIon
or   
						

							7
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system 
The Kensington security system connector is 
located at the back of the Monitor set. For more 
information of installation and using, refer to the 
manual supplied with the Kensington security 
system or visit 
http://www.kensington.com.
Connect the Kensington security system cable 
between the Monitor set and a table.
The Kensington security system is optional. 
You can obtain it from most electronics stores.
note
When you adjust the angle, do not hold the 
bottom of the Monitor set frame as shown on 
the following illustration, as may injure your 
fingers.
Do not touch or press the screen when 
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor 
screen can detach from stand base and injure 
your body.
w ARnInG
Tilt from +20 to -5 degrees up or down to adjust 
the angle of the Monitor set to suit your view.
note
Front Rear  
						

							8
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it will not drop.
1  Please, Use the screw and wall mount interface  in accordance with VESA Standards.
2  If you use screw longer than standard, the monitor might be damaged internally. 
3  If you use improper screw, the product might be damaged and drop from mounted position.  In 
this case, LG Electronics is not responsible for 
it. 
4  VESA compatible.
5  Please use VESA standard as below.
 
y 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x 
                Length 10 mm
 
y 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad  and screws.
10 cm
10 cm
10 cm
10 cm
 
y Disconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 
y If you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 
y Use only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 
y   Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 
y   Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
 
y Use the screws that are listed on the VESA 
standard screw specifications.
 
y The wall mount kit will include an installation 
manual and necessary parts.
 
y The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 
y The length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.
 
y For more information, refer to the 
instructions supplied with the wall mount.
CAUtIon
note
Model22EA63V
23EA63V
VesA (A x B) 75  x 75
standard screw M4
number of screws 4
Model27EA63V
VesA (A x B)100  x 100
standard screw M4
number of screws 4  
						

							9
ENGENGLISH
USING THE MONITOR SET
UsInG tHe MonItoR set
Connecting to a PC
 
y Your Monitor set supports Plug & Play*. 
*Plug & Play:  A PC recognizes a connected 
device that users connect to a PC and turn 
on, without device configuration or user 
intervention.
D-sUB connection
Transmits analog video from your PC to the 
Monitor set. Connect the PC and the Monitor set 
with the supplied D-sub 15 pin signal cable as 
shown in the following illustrations.
 
y Mac adapter
For Apple Macintosh use, a separate plug 
adapter is needed to change the 15 pin 
high density (3 row) D-SUB VGA connector 
on the supplied cable to a 15 pin 2 row 
connector.
 
y When using a D-Sub signal input cable 
connector for Macintosh
 
y If you use HDMI PC, it can cause compatibility 
problem.
note
note
DVI-D connection
Transmits a digital video signal from your PC to 
the Monitor set. Connect the PC and the Monitor 
set with a DVI cable as shown in the following 
illustrations.
HDMI connection
Transmits the digital video and audio signals from 
your PC or A/V to the Monitor set. Connect the PC 
or A/V and the Monitor set with the HDMI cable as 
shown in the following illustrations.  
						

							10
ENGENGLISH
USING THE MONITOR SET
 
y When you want to use two PC in our Monitor, 
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
 
y If you turn the Monitor set on while it is cold, 
the screen may flicker. This  is normal.
 
y Some red, green, or blue spots may appear 
on the screen. This is normal.  
y "self Image setting" Function.
This function provides the user with optimal 
display settings.When the user connects 
the monitor for the first time, this function 
automatically adjusts the display to optimal 
settings for individual input signals.(Only 
supported in Analog Mode)
 
y ‘AUto’ Function.
When you encounter problems such as 
blurry screen, blurred letters, screen flicker 
or tilted screen while using the device or 
after changing screen resolution, press the 
AUTO function button to improve resolution.
(Only supported in Analog Mode)
note note
 
y Connect the signal 
input cable and tighten 
it by turning the screws 
clockwise.
 
y Do not press the screen with your finger for  
a long time as this may result in temporary 
distortion on the screen.
 
y Avoid displaying a fixed image on the 
screen for a long period of time to prevent 
image burn. Use a screensaver if possible.
CAUtIonSelf Image Setting Function
Press the power button on the bottom panel to 
turn the power on. When monitor power is turned 
on, the "self Image setting " Function is executed 
automatically. (Only supported in Analog Mode)