LG 22mp57vqp Owners Manual

							10
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the Monitor set into its upright 
position on a table.
Leave a 10 cm (minimum) space from the wall 
for proper ventilation.
2 Connect the AC-DC Adapter and Power Cord 
to a wall outlet.
10 cm
10 cm
10 cm
10 cm
or 
 yIllustrations in this document represent typical pro-
cedures, so they may look different from the actual 
product.
 yDo not carry the monitor upside down by just hold-
ing the stand base. This may cause the monitor to 
fall off the stand and could result in personal injury.
 yWhen lifting or moving the monitor, do not touch 
the monitor screen. The force applied to the moni-
tor screen may cause damage to it.
 yIf you use the monitor panel without the stand 
base, its joystick button may cause the moni-tor to 
become unstable and fall, resulting in damage to 
the monitor or human injury. In addition, this may 
cause the joystick button to malfunction.
CAUTION
(19  V      ) 
(19  V      )   
						

							11
ENGENGLISH
ASSEMBLING AND PREPARING
Using the cable holder
3 Press the joystick button on the bottom of the 
monitor to turn on the monitor.
Unplug the power cord before moving the 
Monitor to another location. Otherwise electric 
shock may occur.
CAUTION
Cable holder
ENGLISH
When you adjust the angle, do not hold the 
bottom of the Monitor set frame as shown on 
the following illustration, as may injure your 
fingers.
Do not touch or press the screen when 
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor 
screen can detach from stand base and injure 
your body.
WARNING  
						

							12
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system 
The Kensington security system connector is 
located at the back of the Monitor set. For more 
information of installation and using, refer to the 
manual supplied with the Kensington security 
system or visit http://www.kensington.com.
Connect the Kensington security system cable 
between the Monitor set and a table.
The Kensington security system is optional. 
You can obtain it from most electronics stores.
NOTE
Tilt from +20 to -5 degrees up or down to adjust 
the angle of the Monitor set to suit your view.
NOTE
FrontRear
Tilt from +20 to -3 degrees up or down to adjust 
the angle of the Monitor set to suit your view.
NOTE
FrontRear
22MP57A
22MP57D
22MP57HQ
22MP57VQ
23MP57A
23MP57D
23MP57H
24MP57HQ
24MP57VQ
24MP57D
23MP57HQ
23MP57VQ
27MP57VQ27MP57HQ27MP57HT
22MC57HQ
24MC57HQ  
						

							13
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it will not drop.
1  If you use screw longer than standard, the 
monitor might be damaged internally. 
2  If you use improper screw, the product might be 
damaged and drop from mounted position. 
    In this case, LG Electronics is not responsible 
for it. 
10 cm
10 cm
10 cm10 cm
 yDisconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 yIf you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 yUse only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 y 
Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 y 
Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
 yScrew length from outer surface of back 
cover should be under 8mm. 
 yUse the screws that are listed on the VESA 
standard screw specifications.
 yThe wall mount kit will include an installation 
manual and necessary parts.
 yThe wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 yThe length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.
 yFor more information, refer to the 
instructions supplied with the wall mount.
CAUTION
NOTE
Back Cover
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.8mm
 yWall Mount (A x B)
AB
Model22MP57A22MP57D22MP57HQ22MP57VQ
23MP57A23MP57D23MP57H24MP57HQ24MP57VQ24MC57HQ
24MP57D
23MP57HQ23MP57VQ27MP57HQ22MC57HQ
27MP57VQ27MP57HT  
Wall Mount (A x B)75  x 75
Standard screwM4 x L10
Number of screws4
Wall Mount Plate(Optional) 
RW120  
						

							14
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
 yYour Monitor set supports Plug & Play*. 
*Plug & Play:  A PC recognizes a connected 
device that users connect to a PC and turn 
on, without device configuration or user 
intervention.
D-SUB connection
Transmits analog video from your PC to the 
Monitor set. Connect the PC and the Monitor set 
with the supplied D-sub 15 pin signal cable as 
shown in the following illustrations.
 yMac adapter
For Apple Macintosh use, a separate plug 
adapter is needed to change the 15 pin 
high density (3 row) D-SUB VGA connector 
on the supplied cable to a 15 pin 2 row 
connector.
 yWhen using a D-Sub signal input cable 
connector for Macintosh
NOTE
HDMI connection
Transmits the digital video and audio signals from 
your PC to the Monitor set. Connect the PC and 
the Monitor set with the HDMI cable as shown in 
the following illustrations.
 yIf you use HDMI PC, it can cause compatibility 
problem.
NOTE
DVI-D connection
Transmits a digital video signal from your PC to 
the Monitor set. Connect the PC and the Monitor 
set with a DVI cable as shown in the following 
illustrations.  
						

							15
ENGENGLISH
USING THE MONITOR SET
 yConnect the signal input cable 
and tighten it by turning the 
screws clockwise.
 yDo not press the screen with 
your finger for  a long time as this may 
result in temporary distortion on the screen.
 yAvoid displaying a fixed image on the 
screen for a long period of time to prevent 
image burn. Use a screensaver if possible.
CAUTION
 yWhen you want to use two PC in our Monitor, 
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
 yIf you turn the Monitor set on while it is cold, 
the screen may flicker. This  is normal.
 ySome red, green, or blue spots may appear 
on the screen. This is normal.
NOTE
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from 
your AV devices to the monitor. Connect your AV 
device to the monitor with the HDMI cable as il-
lustrated below.
 yIf you use HDMI PC, it can cause compatibility 
problem.
NOTE  
						

							16
ENGLISH
USING THE MONITOR SET
Connecting to External Devices
Peripheral device connection
Connect peripheral devices to the monitor using 
headphone ports. 
 yPeripheral devices are sold separately.
 yCables with angled plugs may have clear-
ance issues, use straight plugs when pos-
sible.
Angle TypeStraight Type
NOTE
NOTE
 yHeadphones or speakers may not work nor-
mally, depending on the server PC settings. 
(sold separately)  
						

							17
ENGENGLISH
INSTALLING LG MONITOR SOFTWARE
INSTALLING THE LG MONITOR SOFTWARE
Installing The Screen Split
1  Set the default Web browser to Internet Explorer.
Insert the the owner's manual CD included in the product package into yo\
ur PC's CD driver and install the 
Screen Split.
2  Click the "Screen Split " on the CD's main 
screen. When the file download window 
appears, click the Run button. (The file 
download window may vary depending on the 
operating system and the Internet Explorer 
version, but the installation procedures are 
same.)
 
y Service Pack 1 or higher is required for 
Windows 7 & Windows 8.
3  Follow the instructions to proceed with the 
installation.
4  Check "I accept the terms of the agreement" on the License Agreement screen and then click 
the [Next] button.
CAUTION 
						

							18
ENGENGLISH
INSTALLING LG MONITOR SOFTWARE
6  When the installation is complete, restart your system.
 
NOTE
If you run Screen Split, the Screen Split icon [  
] appears in the system tray at the right bottom of 
the PC screen. 
Right-click the Screen Split icon and select a 
layout you want.
5  The Screen Split installation starts as shown 
below.
 
y Screen Split: This program automatically 
splits the program window as desired.  
 Monitor Selection only supported in extend 
display.       
 This program supported Windows 7 & 
Windows 8.
NOTE 
						

							19
ENGENGLISH
INSTALLING LG MONITOR SOFTWARE
Installing The LG Color Cloning
Insert the the owner's manual CD included in the product package into yo\
ur PC's CD driver and install the 
LG Color Cloning.
The installation screen images are for reference only. The actual installation screen images may vary de 
pending on the model.
3 Follow the instructions to proceed with the 
installation.
4 Check the I accept the terms of the agree-
ment checkbox on the License Agreement 
screen and then click the Next button.
5  Click the install button.
1 Set the default Web browser to Internet 
Explorer.
2 Click the "LG Color Cloning" on the CD's 
main screen. When the file download window 
appears, click the Run button. (The file 
download window may vary depending on the 
operating system and the Internet Explorer 
version, but the installation procedures are 
same.)
 yService Pack 1 or higher is required for 
Windows 7 & Windows 8.
CAUTION