LG 22m45d-b Manual

							www.lg.com
LED LCD MONITOR MODEL
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating 
your set and retain it for future reference.
19M45D
20M45D
22M45D
23M45D
24M45D
19M45A
20M45A
22M45A 
						

							2
ENGENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLING AND PREPAR-
ING
3  Unpacking
4 Parts and buttons
5 Setting up the Monitor set 
5  - Attaching the Stand Base
5  - Detaching the Stand Base 
6  - Mounting on a table
6  - Using the cable holder
8  - Mounting on a wall
9  USING THE MONITOR SET
9  Connecting to a PC
9  - D-SUB connection
9  - DVI-D connection
11 CUSTOMIZING SETTINGS
12  Customizing Settings
12  - Menu Settings
13    - Picture
14   - Color
15   - Display
16   - Others
17 READER Setting
18 FUNC. Setting
18    - SUPER ENERGY SAVING 
19   - Picture Mode
20   - DUAL DISPLAY
20   - DUAL WEB
21 TROUBLESHOOTING
23   SPECIFICATIONS 
23  19M45A
24 19M45D
25 20M45A
26 20M45D
27 22M45A
28 22M45D
29 23M45D
30 24M45D
31 Preset Modes (Resolution)
32 Indicator
33 PROPER POSTURE
33  Proper posture for using the Monitor set.  
						

							3
ENGENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
 accessories, contact the local 
dealer where you purchased your product. The illustrations in this manual may differ from the actual product 
and accessories.
 yDo not use any unapproved accessories to ensure the safety and product l\
ife span.
 yAny damages or injuries by using unapproved accessories are not covered \
by the warranty. 
 yThe accessories supplied with your product may vary depending on the mod\
el.
 yProduct specifications or contents in this manual may be changed without prior notice due to upgrade 
of product functions.
CAUTION
NOTE
Stand BodyStand Base
CD(Owner's Manual) /
 Card
D-SUB Cable
( Depending on the country )( Depending on the country )
Power CordAC-DC AdapterAC-DC Adapter
or 
DVI-D Cable
(This cable is not included in all 
countries.)
(19M45D/20M45D/22M45D/23M45D/
24M45D)  
						

							4
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
Power Indicator
 yLighting On: Turned on
 yLighting Off: Turned off
Connection panel (See p.9)
Button (See p.11)
(Power Button)  
						

							5
ENGENGLISH
ASSEMBLING AND PREPARING
Attach the Stand Body to the monitor set.
Attach the Stand Base.
Tighten the screw to the right.
Setting up the Monitor set 
Attaching the Stand Base
1 Place the Monitor set with the screen side 
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth 
on the surface to protect the screen from 
damage.
CAUTION
2 
Stand Base
Stand Body
1
2
3
Detaching the Stand Base 
1 Place the Monitor set with the screen side 
down on a flat and cushioned surface.
Stand Base
Stand Base
Stand Body
Stand Body
Pull out the Stand Body and Stand Base 
from the monitor set.
Turn the screw to the left.
Pull out the Stand Base.
1
2
3
2 
 yThis illustration depicts the general model of 
connection. Your monitor may differ from the 
items shown in the picture.
 yDo not carry the product upside down holding 
only the stand base. The product may fall 
and get damaged or injure your foot.
CAUTION  
						

							6
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the Monitor set into its upright 
position on a table.
Leave a 10 cm (minimum) space from the wall 
for proper ventilation.
Using the cable holder
2 Connect the AC-DC Adapter and Power Cord 
to a wall outlet.
3 Press (Power) button on the bottom switch 
panel to turn the power on.
10 cm
10 cm
10 cm
10 cm
Unplug the power cord before moving the 
Monitor to another location. Otherwise electric 
shock may occur.
CAUTION
Cable holder
or   
						

							7
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system 
The Kensington security system connector is 
located at the back of the Monitor set. For more 
information of installation and using, refer to the 
manual supplied with the Kensington security 
system or visit http://www.kensington.com.
Connect the Kensington security system cable 
between the Monitor set and a table.
The Kensington security system is optional. 
You can obtain it from most electronics stores.
NOTE
When you adjust the angle, do not hold the 
bottom of the Monitor set frame as shown on 
the following illustration, as may injure your 
fingers.
Do not touch or press the screen when 
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor 
screen can detach from stand base and injure 
your body.
WARNING
Tilt from +20 to -3 degrees up or down to adjust 
the angle of the Monitor set to suit your view.
NOTE
FrontRear  
						

							8
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it will not drop.
1  Please, Use the screw and wall mount interface 
in accordance with VESA Standards.
2  If you use screw longer than standard, the 
monitor might be damaged internally. 
3  If you use improper screw, the product might be 
damaged and drop from mounted position.  In 
this case, LG Electronics is not responsible for 
it. 
4  VESA compatible.
5  Please use VESA standard as below.
 y784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x 
                Length 10 mm
 y787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad 
and screws.
10 cm
10 cm
10 cm10 cm
 yDisconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 yIf you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 yUse only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 y 
Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 y 
Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
 yUse the screws that are listed on the VESA 
standard screw specifications.
 yThe wall mount kit will include an installation 
manual and necessary parts.
 yThe wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 yThe length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.
 yFor more information, refer to the 
instructions supplied with the wall mount.
CAUTION
NOTE
Model19M45A   
VESA (A x B)75  x 75100  x 100
Standard screwM4M4
Number of screws44
19M45D
20M45D20M45A
22M45A
22M45D
24M45D
23M45D  
						

							9
ENGENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
 yYour Monitor set supports Plug & Play*. 
*Plug & Play:  A PC recognizes a connected 
device that users connect to a PC and turn 
on, without device configuration or user 
intervention.
D-SUB connection
Transmits analog video from your PC to the 
Monitor set. Connect the PC and the Monitor set 
with the supplied D-sub 15 pin signal cable as 
shown in the following illustrations.
 yMac adapter
For Apple Macintosh use, a separate plug 
adapter is needed to change the 15 pin 
high density (3 row) D-SUB VGA connector 
on the supplied cable to a 15 pin 2 row 
connector.
 yWhen using a D-Sub signal input cable 
connector for Macintosh
NOTE
DVI-D connection
Transmits a digital video signal from your PC to 
the Monitor set. Connect the PC and the Monitor 
set with a DVI cable as shown in the following 
illustrations.  
						

							10
ENGENGLISH
USING THE MONITOR SET
 yWhen you want to use two PC in our Monitor, 
please connect the signal cable(D-SUB/
DVI-D) respectively in Monitor set.
 yIf you turn the Monitor set on while it is cold, 
the screen may flicker. This  is normal.
 ySome red, green, or blue spots may appear 
on the screen. This is normal.
 y"Self Image Setting" Function.
This function provides the user with optimal 
display settings.When the user connects 
the monitor for the first time, this function 
automatically adjusts the display to optimal 
settings for individual input signals.(Only 
supported in Analog Mode)
 y‘AUTO’ Function.
When you encounter problems such as 
blurry screen, blurred letters, screen flicker 
or tilted screen while using the device or 
after changing screen resolution, press the 
AUTO function button to improve resolution.
(Only supported in Analog Mode)
NOTENOTE
Self Image Setting Function
Press the power button on the bottom panel to 
turn the power on. When monitor power is turned 
on, the "Self Image Setting" Function is executed 
automatically. (Only supported in Analog Mode)
 yConnect the signal 
input cable and tighten 
it by turning the screws 
clockwise.
 yDo not press the screen with your finger for  
a long time as this may result in temporary 
distortion on the screen.
 yAvoid displaying a fixed image on the 
screen for a long period of time to prevent 
image burn. Use a screensaver if possible.
CAUTION