LG 22ld350 Owners Manual

							PREPARATION
21
ATTACHING THE TV TO A DESK (Except 19/22LD350, 19/22LD350C)
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.
G GTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
WARNING
1-Screw
(provided as parts of the product)
Desk
Stand
KENSINGTON SECURITY SYSTEM
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on
the back panel. Connect the Kensington Security System cable as
shown below.
- For  the  detailed  installation  and  use  of  the  Kensington  Security
System,  refer  to  the  user’s  guide  provided  with  the  Kensington
Security System.
For  further  information,  contact h ht
tt
tp
p:
:/
//
/w
ww
ww
w.
.k
ke
en
ns
si
in
ng
gt
to
on
n.
.c
co
om
m
,
the internet homepage of the Kensington company. Kensington sells
security  systems  for  expensive  electronic  equipment  such  as  note-
book PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
3ownloaded(Qrom(TVSXanualBcom(Xanuals 
						

							PREPARATION
22
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
PREPARATION
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. 
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product. 
Caution: Please make sure that children don’t climb on or hang from the TV. 
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. 
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. 
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product. 
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
G GUse a platform or cabinet strong enough and large enough to support the size and weight of the TV.
G
GTo use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
NOTE!
JownloadedGjromGTVhManualncomGManuals 
						

							PREPARATION
23
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
2. Cable
Wa l l
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Cable TV
Wall JackMulti-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the copper wire
when connecting the antenna.
Copper Wire
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.   
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
ANTENNA
/CABLE IN
To prevent damage do not connect to the power outlet until all connections are made between the devices.
Image shown may differ from your TV.
ANTENNA
/CABLE IN
 
						

							EXTERNAL EQUIPMENT SETUP
24
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.
Component Connection
1. How to connect
Connect the video outputs (
Y,   PB, PR)
of the digital set-
top  box  to  the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O 
 
jacks  on
the TV. Match the jack colors (Y = green, P
B= blue, and
P
R= red).
Connect the audio output of the digital set-top box to 
the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 A
AU
UD
DI
IO
O 
 
jacks on the TV.
2
1
2. How to use
Turn on the digital set-top box. 
(
Refer to the owner’s manual for the digital set-top box operation.)
Select theC Co
om
mp
po
on
ne
en
nt
t
input source on the TV using the
I IN
NP
PU
UT
T
button on the remote control.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 3 32
2L
LD
D3
35
50
0
.
RS-232C IN(CONTROL&SERVICE)
ANTENNA
/CABLE IN
B IN (PC)
VIDEOAUDIORL/MONO
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)AV IN 1
VIDEOYPBPRLRAUDIOCOMPONENT IN
YLRPBPR
12
Y, CB/PB, CR/PRSupported Resolutions
Horizontal  Vertical 
Frequency(
KHz)
Frequency(
Hz)
15.73 59.94
15.73 60.00
31.47 59.94
31.50 60.00
44.96 59.94
45.00 60.00
33.72 59.94
33.75 60.00
26.97 23.976
27.00 24.00
33.71 29.97
33.75 30.00
67.432 59.94
67.50 60.00 Resolution 
720x480i
720x480p
1280x720p
1920x1080i
1920x1080pSignal
480 i
480 p
720 p
10 8 0 i
10 8 0 pComponent
Ye s
Ye s
Ye s
Ye s
Ye sHDMI
No
Ye s
Ye s
Ye s
Ye s
3ownloaded(Qrom(TVSXanualBcom(Xanuals 
						

							EXTERNAL EQUIPMENT SETUP
25
HDMI Connection
Connect the digital set-top box to the H HD
DM
MI
I/
/D
DV
VI
I
I IN
N
or H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N 
 1
1/
/2
2
* jack on the TV.
No separate audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
Turn on the digital set-top box. 
(
Refer to the owner’s manual for the digital set-top box.)
Select theH HD
DM
MI
I
orH HD
DM
MI
I1
1/
/2
2
* input source on the TV
using the I IN
NP
PU
UT
T
button on the remote control.
2
1
RS-232C IN(CONTROL&SERV
VIDEOYPBPRLAUDIO
RGB IN (PC)
VIDEOAUDL/MONO
COMPONENT IN
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)
1
/DVI IN
HDMI OUTPUT
1
HDMI-DTV
Horizontal  Vertical 
Frequency(
KHz)
Frequency(
Hz)
31.47 59.94
31.50 60.00
44.96 59.94
45.00 60.00
33.72 59.94
33.75 60.00
26.97 23.976
27.00 24.00
33.71 29.97
33.75 30.00
67.432 59.94
67.50 60.00 Resolution 
720x480p
1280x720p
1920x1080i
1920x1080p
* HDMI 2: For 26/32LD350, 32LD320
G GIf an HDMI cables doesn’t support HDMI version 1.3, it
can cause flickers or no screen display. In this case use the
latest cables that support HDMI version 1.3.
G GHDMI Audio Supported Format: AC3 (32 KHz, 44.1 KHz,
48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)
NOTE!
JownloadedGjromGTVhManualncomGManuals 
						

							EXTERNAL EQUIPMENT SETUP
26
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
RS-232C IN(CONTROL&SERVICE)
VIDEOYPBPRLRAUDIO
RGB IN (PC)
VIDEOAUDIORL/MONO
COMPONENT IN
OPTICAL
DIGITALAUDIO OUT AV IN 1
1
/DVI IN
AUDIO IN(RGB/DVI)
LRDVI OUTPUTAUDIO
1
2
G GA DVI to HDMI cable or adapter is required for this con-
nection. DVI doesn't support audio, so a separate audio
connection is necessary.
NOTE!
Connect  the  DVI  output  of  the  digital  set-top  box  to
the H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N
or H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N 
 1
1 
 
jack on the
TV.
Connect  the  digital  set-top  box  audio  output  to  the
A AU
UD
DI
IO
O 
 I
IN
N 
 (
(R
RG
GB
B/
/D
DV
VI
I)
)
jack on the TV.
1. How to connect
2. How to use
Turn on the digital set-top box. 
(
Refer to the owner’s manual for the digital set-top box.)
Select theH HD
DM
MI
I
orH HD
DM
MI
I1
1 
 
input source on the TV using
the I IN
NP
PU
UT
T
button on the remote control.
2
1
’ownloadedr&romrTVdManualxcomrManuals 
						

							EXTERNAL EQUIPMENT SETUP
27
DVD SETUP
Component Connection
Component Input ports
To get better picture quality, connect a DVD player to the
component input ports as shown below.
Component ports on the TV
YPBPR
Video output ports 
on DVD player
Y
Y
Y
YPB
B-Y
Cb
PbP
R
R-Y
Cr
Pr
RS-232C IN(CONTROL&SERVICE)
ANTENNA
/CABLE IN
N (PC)
VIDEOAUDIORL/MONO
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)AV IN 1
VIDEOYPBPRLRAUDIOCOMPONENT IN
YLRPBPR
12
Connect  the  video  outputs (
Y,   PB,  PR)
of  the  DVD  to
the C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 V
VI
ID
DE
EO
O
jacks on the TV. Match
the jack colors (
Y = green, P
B= blue, and PR= red)
.
Connect the audio outputs of the DVD to the
C CO
OM
MP
PO
ON
NE
EN
NT
T 
 I
IN
N 
 A
AU
UD
DI
IO
O
jacks on the TV.
1. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select the C Co
om
mp
po
on
ne
en
nt
t
input source on the TV using the
I IN
NP
PU
UT
T
button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
’ownloadedr&romrTVdManualxcomrManuals 
						

							EXTERNAL EQUIPMENT SETUP
28
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
RS-232C IN(CONTROL&SERVICE)
ANTENNA
/CABLE INVIDEOYPBPRLRAUDIO
N (PC)
COMPONENT IN
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)VIDEOAUDIORL/MONOAV IN 1
LRVIDEOAUDIO
HDMI Connection
RS-232C I(CONTROL&SER
VIDEOYPBPRLAUD
RGB IN (PC)
VIDEOAUL/MONO
COMPONENT IN
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)
1
/DVI IN
HDMI OUTPUT
1
Connect  the A AU
UD
DI
IO
O
/V VI
ID
DE
EO
O
jacks between  TV  and
DVD. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red).
1. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select the A AV
V
or A AV
V1
1/
/2
2
* input source on the TV using the
I IN
NP
PU
UT
T
button on the remote control.  
Refer to the DVD player's manual for operating instructions.
1
Connect the HDMI output of the DVD to the
H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N
or H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N 
 1
1/
/2
2
* jack on
the TV.
No separated audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
Select the H HD
DM
MI
I
or H HD
DM
MI
I1
1/
/2
2
* input source on the TV
using the I IN
NP
PU
UT
T
button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
* AV2: For 26/32LD350, 32LD320
* HDMI 2: For 26/32LD350, 32LD320
G GIf an HDMI cables doesn’t support HDMI version 1.3, it
can cause flickers or no screen display. In this case use the
latest cables that support HDMI version 1.3.
G GHDMI Audio Supported Format: AC3 (32KHz, 44.1KHz,
48KHz), Linear PCM (32KHz, 44.1KHz, 48KHz)
NOTE!
1
JownloadedGjromGTVhManualncomGManuals 
						

							EXTERNAL EQUIPMENT SETUP
29
VCR SETUP
Antenna Connection
Connect the RF antenna out socket of the
VCR to the A AN
NT
TE
EN
NN
NA
A/
/C
CA
AB
BL
LE
E 
 I
IN
N
sock-
et on the TV.
Connect  the  antenna  cable  to  the  RF
antenna in socket of the VCR.
1. How to connect
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Insert a video tape into the VCR and press PLAY
on the VCR. (
Refer to the VCR owner’s manual.)
2. How to use
2
1
RIO
UDIORAV IN 1
ANTENNA
/CABLE INLRS-VIDEO VIDEO
OUTPUT
SWITCH ANT IN ANT OUT
AUDIO
Wall Jack
Antenna
1
2
Composite (RCA) Connection
G GIf you have a mono VCR, connect the audio cable from
the VCR to the A AU
UD
DI
IO
O 
 L
L/
/M
MO
ON
NO
O 
 
jack of the TV.
NOTE!
LRS-VIDEO VIDEO
AUDIO
OUTPUT
SWITCH ANT IN
ANT OUT
RS-232C IN(CONTROL&SERVICE)
ANTENNA
/CABLE INVIDEOYPBPRLRAUDIO
IN (PC)
COMPONENT IN
OPTICAL
DIGITALAUDIO OUT AUDIO IN(RGB/DVI)VIDEOAUDIORL/MONOAV IN 1
1
Connect  the A AU
UD
DI
IO
O
/V VI
ID
DE
EO
O
jacks between  TV  and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red).
1. How to connect
2. How to use
Insert a video tape into the VCR and press PLAY on the
VCR. (
Refer to the VCR owner’s manual.)
Select the A AV
V
or A AV
V1
1/
/2
2
* input source on the TV using
the I IN
NP
PU
UT
T
button on the remote control. 
1
* AV2: For 26/32LD350, 32LD320
3ownloaded(Qrom(TVSXanualBcom(Xanuals 
						

							EXTERNAL EQUIPMENT SETUP
30
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
VIDEO
AUDIO
L/MONO
R
USB IN
AV IN 2
IN 2
H/P
LRVIDEO
Camcorder
Video Game Set
Connect  the A AU
UD
DI
IO
O
/V VI
ID
DE
EO
O
jacks
between  TV  and  external  equipment.
Match the jack colors
.
(
Video = yellow, Audio Left = white, and
Audio Right = red)
1. How to connect
2. How to use
Select the A AV
V2
2
* input source on the TV using
the I IN
NP
PU
UT
T
button on the remote control.
If  connected  to A AV
V
or A AV
V 
 I
IN
N 
 1
1
input,  select
the A AV
V
or A AV
V1
1
input source on the TV.
Operate the corresponding external equipment.
1
1
* AV2: For 26/32LD350, 32LD320
USB CONNECTION (For 32LD350, 32LD320)
IN 2
VIDEO
AUDIO
L/MONO
R
H/PUSB IN
AV IN 2
Memory KeyConnect the USB device to the U US
SB
B 
 I
IN
N
jack on the side
of TV. 
1. How to connect
1
2. How to use
After connecting the U US
SB
B 
 I
IN
N
jack, you use the USB
function. (
G Gp
p.
.5
58
8)
1or
3ownloaded(Qrom(TVSXanualBcom(Xanuals