LG 19ld350 Owners Manual
Have a look at the manual LG 19ld350 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MUSIC LIST USB 71 You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Screen Components Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps • Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz Moves to upper level folder Preview: If any album jacket for the file exists, this jack- et is displayed. Current page/Total pages Total number of marked musics Corresponding buttons on the remote control 1 3 4 5 2 Select U US SB B .Select M Mu us si ic c L Li is st t . 1 2 MENUENTERENTER Music List Up FolderTitle Duration 34 2 1 Page 2/3No Marked Drive1 Navigation Popup Menu Page ChangeMark ExitCHMARK 5 A A 00:00 / 04:16Up Folder
USB 72 USB Music Selection and Popup Menu Use the C CH H button to navigation in the music page. Use M MA AR RK K button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play. Select the target folder or drive. Select the desired musics. Show the Popup menu. Select the desired Popup menu. 2 3 1 4ENTER ENTER ENTER 5 BACKReturn to TV viewing. Navigation Page Change MarkExit CHMARKPopup Menu Navigation Page Change MarkExit CHMARKPopup Menu Page 2/3No MarkedMusic List Up Folder A A 00:00 / 04:16Up Folder Drive1 Title Duration Page 2/3No MarkedMusic List Up Folder A A 00:00 / 04:16Up Folder Drive1 Title Duration 3945 KB 128 Kbps Play Play with Photo Mark All Delete Close G GP Pl la ay y (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold- er will be played. If you go to a different folder and press the E EN NT TE ER R button, the current music in playback will stop. G GP Pl la ay y M Ma ar rk ke ed d : Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G GS St to op p P Pl la ay y (During playback): Stop the play- ing musics. G GP Pl la ay y w wi it th h P Ph ho ot to o : Start playing the selected musics and then move to the Photo List. G GM Ma ar rk k A Al ll l : Mark all musics in the folder. G GU Un nm ma ar rk k A Al ll l : Deselect all marked music. G GD De el le et te e : Delete the selected music. G GC Cl lo os se e : Close the pop-up menu.
USB 73 The play information box (as shown below) will automatically move across the screen when there is no user input to pre- vent a fixed image remaining on the screen for a extended period of time. NOTE! G GWhen music is playing, is displayed in front of the music play time. G GA damaged or corrupted music file that does not play displays 00:00 as the play time. G GMusic files with copy-protection will not play. G GPress E EN NT TE ER R , A A, or R RE ET TU UR RN N button to stop the screen saver.
PICTURE CONTROL 74 PICTURE SIZE (ASPECT RATIO) CONTROL PICTURE CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. HDMI/RGB-PC input source use 4:3 or 16:9 aspect ratio. But you can select all aspect ratios in HDMI-PC 1920X1080 input. You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux). You can also adjust A As sp pe ec ct t R Ra at ti io o in the Q Q. .M ME EN NU U. Press the R RA AT TI IO O button repeatedly to select the desired picture format. EnterMovePICTURE E EnterMovePICTURE E Aspect Ratio : 16:9 Picture Wizard Energy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70Aspect Ratio : 16:9 Picture WizardEnergy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 16:9 Just Scan Set By Program 4:3 Zoom Cinema Zoom 1 Select P PI IC CT TU UR RE E . Select A As sp pe ec ct t R Ra at ti io o . Select the desired picture format. 1 MENU 3 2 ENTER ENTER 4 BACKReturn to the previous menu. MENUReturn to TV viewing.
PICTURE CONTROL 75 16:9 Adjust the picture horizontally, in a linear pro- portion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. J Ju us st t S Sc ca an n operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p)input source. Set By Program Selects the proper picture proportion to match the source’s image. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. When adjusting in Q.MENU menu, a. or button: Adjust proportion of Zoom. b. or button: Move the image on the screen. Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. This enlarges an image with cinemascope aspect ratio (2.35:1) without distortion. Note: When enlarging or reducing the picture, the image may become distorted. or button: Adjust proportion of Cinema Zoom. The adjustment range is 1-16. or button: Move the image on the screen. Just Scan (4:3 4:3) (16:9 16:9) Set By Program Set By Program
PICTURE CONTROL 76 PICTURE WIZARD PICTURE CONTROL Select P PI IC CT TU UR RE E . Select P Pi ic ct tu ur re e W Wi iz za ar rd d . 1 MENU 2ENTERENTER Adjust P Pi ic ct tu ur re e W Wi iz za ar rd d .Adjust W Wh hi it te e L Le ev ve el l . 3ENTER Adjust B Bl la ac ck k L Le ev ve el l . 4ENTER 5ENTER Adjust H Ho or ri iz zo on nt ta al l S Sh ha ar rp pn ne es ss s .8ENTER Adjust C Co ol lo or r . 6ENTER Adjust T Ti in nt t . 7ENTER Picture Wizard With Picture Wizard, you can adjust the picture quality of the original image. G Black Level Set the screen above identical to the Recommended sample below. Next Previous Next Previous • Brightness 50E EE E Low HighRecommended Color Set the screen above identical to the Recommended sample below. Next Previous • Color 50E EE E Low HighRecommended White Level Set the screen above identical to the Recommended sample below. Next Previous Low HighRecommended • Contrast 90E EE E Tint Set the screen above identical to the Recommended sample below. Next Previous Low HighRecommended • Tint 0E EE ERG Horizontal Sharpness Set the screen above identical to the Recommended sample below. Next Previous • H Sharpness 50E EE E Low HighRecommended EnterMovePICTURE E Aspect Ratio : 16:9 Picture Wizard Energy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to L Lo ow w , R Re ec co om mm me en nd de ed d or H Hi ig gh h , you can see the example of the changes you made.
PICTURE CONTROL 77 Select input source to apply the settings. 14 FAVMARK Adjust V Ve er rt ti ic ca al l S Sh ha ar rp pn ne es ss s .9ENTER Adjust B Ba ac ck kl li ig gh ht t . 13 ENTER Finish the Picture Wizard.16ENTER Save.15ENTER Complete Confirm Move Previous Vertical Sharpness Set the screen above identical to the Recommended sample below. Next Previous • V Sharpness 50E EE E Low HighRecommended Backlight Set the Backlight to your Brightness preference. Next Previous • Backlight 50E EE E Dark BrightRecommended DTV TV AV1 AV2 Component RGB-PC HDMI1 HDMI2 Select (an) input(s) to apply the settings. Warning: The picture quality may vary according to the different types of signal and inputs. EEMarkMARK If you stop the setting before the final step, the changes will not be saved to the TV. Once the P Pi ic ct tu ur re e W Wi iz za ar rd d sets the pic- ture quality, E En ne er rg gy y S Sa av vi in ng g is changed to O Of ff f automatically. Close The current adjustment value is saved to Expert1.i Adjust C Co ol lo or r T Te em mp pe er ra at tu ur re e . 10 ENTER Color Temperature Set the Color Temperature as you like. Refer to the samples below. Next Previous • Color Temperature WarmE EE E Warm CoolMedium Adjust D Dy yn na am mi ic c C Co on nt tr ra as st t . 11 ENTER Dynamic Contrast Set the Dynamic Contrast as you like. Refer to the samples below. Next Previous • Dynamic Contrast OffE EE E Off HighMedium Adjust C Co ol lo or r G Ga ai in n . 12 ENTER Color Gain Set the Color Gain as you like. Refer to the samples below. Next Previous • Color Gain Original E EE E Original HighMedium
PICTURE CONTROL 78 PRESET PICTURE SETTINGS (PICTURE MODE) PICTURE CONTROL There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. EnterMovePICTURE E EnterMovePICTURE E Aspect Ratio : 16:9 Picture Wizard Energy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70Aspect Ratio : 16:9 Picture WizardEnergy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 Select P PI IC CT TU UR RE E . Select P Pi ic ct tu ur re e M Mo od de e . Select V Vi iv vi id d ,S St ta an nd da ar rd d , N Na at tu ur ra al l , C Ci in ne em ma a , S Sp po or rt t , or G Ga am me e . 1 MENU 3 2 ENTER ENTER 4 BACKReturn to the previous menu. MENUReturn to TV viewing. Vivid Standard Natural Cinema Sport Game Expert1 Expert2 V Vi iv vi id d , S St ta an nd da ar rd d , N Na at tu ur ra al l , C Ci in ne em ma a , S Sp po or rt t , and G Ga am me e Settings are preset for the optimum picture quality at the facto- ry. V Vi iv vi id d : This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, color and sharpness for vivid picture. S St ta an nd da ar rd d : This is the mode to realize optimum viewing condition for the gen- eral user. N Na at tu ur ra al l : This is the mode to display the most natural screen status. C Ci in ne em ma a : This mode optimizes video for watching movies. S Sp po or rt t : This is the video mode to emphasize dynamic video and primary color (e.g, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports. G Ga am me e : This is the mode to realize fast response speed in a fast gaming screen. E Ex xp pe er rt t : This is the mode to adjust the video in detail for video quality expert and general user. You can also adjust P Pi ic ct tu ur re e M Mo od de e in the Q Q. .M ME EN NU U .
PICTURE CONTROL 79 MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. Select P PI IC CT TU UR RE E . Make appropriate adjustments. Select B Ba ac ck kl li ig gh ht t , C Co on nt tr ra as st t , B Br ri ig gh ht tn ne es ss s , S Sh ha ar rp pn ne es ss s , C Co ol lo or r , or T Ti in nt t . 1 MENU Select P Pi ic ct tu ur re e M Mo od de e . 2ENTER Select V Vi iv vi id d ,S St ta an nd da ar rd d , N Na at tu ur ra al l , C Ci in ne em ma a , S Sp po or rt t , or G Ga am me e .3ENTER 4 ENTER 5 ENTER 6 BACKReturn to the previous menu. MENUReturn to TV viewing. EnterMovePICTURE E Aspect Ratio : 16:9 Picture Wizard Energy Saving: Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70• Backlight 70 E E E E E EE E Enter When adjusting Energy Saving, B Ba ac ck kl li ig gh ht t function is disabled. B Ba ac ck kl li ig gh ht t : This function adjusts the brightness of LCD panel, to control the brightness of the screen. Adjusting the backlight is recommended when setting the brightness of the set. When decreas- ing the backlight, the brightness of the black becomes darker without any loss in video signal and the power consumption is reduced. C Co on nt tr ra as st t : Increase or decrease the gra- dient of the video signal. You may use Contrast when the bright part of picture is saturated. B Br ri ig gh ht tn ne es ss s : Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the pic- ture is saturated. S Sh ha ar rp pn ne es ss s : Adjusts the level of crisp- ness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. C Co ol lo or r : Adjusts intensity of all colors. T Ti in nt t : Adjusts the balance between red and green levels.
PICTURE CONTROL 80 PICTURE IMPROVEMENT TECHNOLOGY PICTURE CONTROL Select P PI IC CT TU UR RE E . Select A Ad dv va an nc ce ed d C Co on nt tr ro ol l . Select your desired options. 1 MENU 3 2 ENTER ENTER 5 BACKReturn to the previous menu. MENUReturn to TV viewing.Make appropriate adjustments. 4 EnterMovePICTUREE RG • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 • Advanced Control • Picture Reset Screen (RGB-PC) EnterMovePICTUREE RG • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 • Advanced Control • Picture Reset Screen (RGB-PC)Color TemperatureF FMedium G G Dynamic ContrastOff Dynamic ColorOff Noise ReductionOff GammaMedium Black LevelLow Eye CareOff Real CinemaOff Close E You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the P Pi ic ct tu ur re e R Re es se et t function for each P Pi ic ct tu ur re e M Mo od de e .