LG 15lw1r Users Guide

							21
19
20
21
22
Remote Control
TV/AV TV/AVTV/MEDIA TV/MEDIA
SLEEP SLEEPCC CCFLASHBK
FLASHBKSURF
SURF
Point the remote towards the remote
control sensor of the wireless TV and
use it within about 7 meters.
EZ VIDEOTV: Adjusts the screen status to your preference.(See page 32)Media Browser: Arranges the list.
EZ AUDIOTV: Adjust the audio status to your preference.(See page 35)Media Browser: Selects multiple files.
Media Browser: Starts the slide show, Plays back the music file randomly, Shows/Hides the movie caption.
AUDIOEach time you press the button, Mono -> Stereo -> SAPwill be displayed sequentially. (See page 35)Media Browser: Plays back the music file repetitively.
19
20
22
21
 
						

							22
Connection and
Usage Power Connection
Connecting the electric power to the wireless TVConnecting the electric power to the wireless transmission unit
Connect the power as shown in the following figure to use the wireless TV.
Wireless TV
DC adaptorPower cord
Wireless 
transmission unitDC adaptor
POWERPower cord
Antenna cable
 
						

							23
Connecting the Antenna
- For optimum picture quality, adjust antenna direction. 
Connecting to an Inside Antenna Setup 
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as
shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
- If you have a 75
Ωround cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ωflat wire, connect the twisted wire to the antenna converter and then
connect the converter to the antenna jack on the TV.
- If using 75
Ωround cable, do not bend the bronze wire. It may cause poor picture quality.
Apartment Buildings
- You can enjoy a better quality screen in a weak radio reception area if you install a radio amplifier (booster).
- If you have difficulty in installing the antenna, consult a specialized antenna dealer or the sales shop you 
purchased the antenna from.
- Do not attach the wireless transmission unit to the wall.
- If you find a mosaic pattern on the screen or the screen is not displayed properly due to poor
network  connection, set the front side of the wireless transmission unit to face towards the
wireless TV.
Wall Connection JackTurn clockwise to tighten.
Bronze Wire
75
ΩRound Cable
300
ΩFlat Wire
Antenna Jack Antenna
Converter
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
Single Family HomeVHF
Antenna Turn clockwise to tighten.
75
ΩRound Cable
300
ΩFlat Wire
Antenna Jack
Antenna
Converter
Wireless transmission unit Front
(Commercial product)Antenna
input port
Radio
amplifier
Antenna cable (Not included)
Necessary Connection Cable
 
						

							24
Connection and
UsageConnecting more than 2 TV Sets
- Connect the connection port with the same color.
- Use the S-Video connection instead of Composite Video (RCA Cables) when available for better quality.
- If the input only supports mono, only the left (white) channel needs to connected.
Connecting antenna
cables using the distributor.
Rear view of other
external device Other TV
Wireless 
transmission unitOther TVRear view of other
external deviceWireless 
transmission unitOther TV
1Connecting with RCA cables.2Connecting with S-Video cables3
- If you connect more than 2 TV sets, the image quality may deteriorate.- Do not attach the wireless transmission unit to the wall.
- If you find a mosaic pattern on the screen or the screen is not displayed properly due to poor network 
connection, set the front side of the wireless transmission unit to face towards the wireless TV.Wireless transmission unit Front
Necessary Connection Cables
RCA cable
S-Video cable
Antenna cable (Not included)
Antenna cable Wireless 
transmission
unit
Antenna
cable
(Output) (Output)
(Input) Distributor
Antenna
cable
 
						

							25
Connecting VCR/DVD
- Connect the connection port with the same color when connecting the wireless transmission unit to the
external device.
- Use the S-Video connection instead of Composite Video (RCA Cables) when available for better quality.
- If the input only supports mono, only the left (white) channel needs to connected.
- An after image can occur when stantionary objects (text, logo, etc) remain on the screen for a long period.
Turn on the wireless TV and select channel #3 or #4
using the TV remote control.
Watching TV through
S-Video connection
Watching TV through 
Composite Video connection
Watching TV through
antenna connection
Wireless 
transmission unit VCR/DVD Connection port on the wallAntenna cable
Direct connection
1
Press the TV/AVbutton on the remote control and
select the 
VideoInput.
Insert a tape into the video player and press the 
PLAY
button.
2
- Do not attach the wireless transmission unit to the wall.
- If you find a mosaic pattern on the screen or the screen is not displayed properly due to poor network connection,
set the front side of the wireless transmission unit to face towards the wireless TV. - You can also play back the video in TV channel #3 or #4. However, the selected channel number should be identical
to channel switch selection at the rear side of the video.
- While in Video input mode, press the 
CH (+, -)button, SURFor FLASHBKbutton to return to TV mode.
Wireless transmission unitFront
Necessary Connection Cables
RCA cable
S-Video cable
Antenna cable (Not included)
Connecting with antenna cables
Connecting with Composite Video or S-Video
 
						

							26
Connection and
UsageConnecting a Cable TV Converter
- Do not attach the wireless transmission unit to the wall.
- If you find a mosaic pattern on the screen or the screen is not displayed properly due to poor network connection,
set the front side of the wireless transmission unit to face towards the wireless TV. - Follow the instructions from the local CATV service provider for more details on the CATV connection usage.
Wireless transmission unit Front
Necessary Connection Cables
RCA cable
S-Video cable
Antenna cable (Not included)
- Connect the connection port with the same color when connecting the wireless transmission unit to the external device.
- To watch the cable TV, you should subscribe to the local CATV broadcasting service provider and install the converter separately.
When connection with 
Composite VideoWhen connecting with the antenna
Press the TV/AVbutton on the
remote control and select 
Video
Input.1
Select the channel you want using the
converter remote control.
2
How to use
Set the exclusive channel selection
switch of the converter to channel #3
or #4.
1
Set the TV channel number to the
same as converters channels selection
switch.
2
Select the channel you want using the
converter remote control.
3
How to useWatching TV
through Composite
Video connection
Watching TV through 
antenna connectionCATV 
port
Converter
Wireless 
transmission unit Converter
 
						

							27
- Do not attach the wireless transmission unit to the wall.
- If you find a mosaic pattern on the screen or the screen is not displaye\
d properly due to poor networkconnection, set the front side of the wireless transmission unit to face\
 towards the wireless TV.
- Screen display delay can occur, depending on the network connections status.
Wireless transmission unit
Front
Necessary Connection Cables
RCA cable
- Connect the connection port with the same color when connecting the wi\
reless transmission unit to the external device.
Press the TV/AVbutton on the
remote control and select
VideoInput.1
Start the Video input device.
2
How to use
Rear view of other external device
Camcorder
Wireless transmission unit
RCA cable
Connecting External Devices like a Camcorder
 
						

							28
Adjustment when Using
the Wireless TV Watching the Wireless TV
Watching the wireless TVWatching the wireless TV in the Media Browser
Press the      POWERbutton on the remote control to watch the wireless TV.
1) Move to the Watching TV menu to watch TV in the Media Browser.
2) Press the        
TV/MEDIAbutton on the remote control to watch TV.Channel display
Remaining battery
amount display
Press the  button on
the remote control to 
display the remaining 
battery amount.
Remaining battery display
Media Browser Home screenshot.
1
2
Move to the Watching TV menu using      and      buttons and press the       button.
TV screenshot
N/A
Image Description
Battery is not inserted.
Very low
Approx. 20% left.
Approx. 50% left.
Approx. 80% left.
Approx. 100%
2
 
						

							Language Selection
Move to[Special].
Select your
desired language. Press the
button.Select[Special].Move to [Language].
3
12
Press the EXIT button to hide the menu screen.
Press the 
MENUbutton to move to the previous menu screen.
On-screen Menus Language Selection
The menus can be shown on the screen in the selected language.
29
EXIT
Input
Caption/Text
Captions
Sleep Timer
Key Lock
Language
G G
English
Fran
Çais
MENU
Special
 
						

							Adjustment when Using
the Wireless TV Programming the Channels
Move to 
[Channel].
Run
[Ez Scan].Select
[Ez Scan].Select 
[
Channel].Move to
[Channel].
Change the
channel.
Press the EXITbutton to hide the menu screen.
Press the 
MENUbutton to move to the previous menu screen.
Memorize or 
clear the 
selected channel.Press
the button.Select
[
Channel].Move to 
[Manual Prog.]. Move to
[Ez Scan].
1
32
Memorizing all broadcasting channelsMemorizing or clearing the specific channels
3
12
30
• If the CATV channel is duplicated with the public TV, the CATV channel will be selected. Each time you 
press the number button (0 ~ 9) for channel selection, CATV-public channel selection will be toggled.
• Press the       or 
Exitbutton while running [Ez Scan] to stop channel setting. Then, the channel(s) 
scanned at that time point will be memorized.
EXIT
Ez ScanG G
Manual Prog.
Favorite Ch.To Start
MENU
Channel
EXIT
Ez Scan
Manual Prog.
G G
Favorite Ch.TV8
Memory
MENU
Channel