Lexmark X945e User Manual

Menu itemDescription
Month
January
February
March
April
May
June
July
August
September
October
November
DecemberSpecifies the month
Day
0–31Specifies the day
Hour
0–23Specifies the hour
Minute
0–59Specifies the minute
DST Mode
Automatic
ManualAccommodates Daylight Savings Time changes
Notes:
Automatic is the factory default setting. The time is set by the server.
Manual allows manual time changes.
Daylight Savings
Yes
NoSpecifies whether Daylight Savings time is applicable
Time Server
IP
NoneSpecifies...

Network/Ports menu
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
Menu itemDescription
TCP/IP
Set Hostname
Address
Netmask
GatewaySpecifies the current TCP/IP address information
Note: This is a four‑field IP address.
TCP/IP
Set static IP address
Address
Netmask
GatewayConfigures the TCP/IP address information
TCP/IP
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
AutoIP...

Menu itemDescription
TCP/IP
WINS Server Address
DNS Server Address
Backup DNS Server Address
Domain Search Order
Restricted Server List
MTU
Default TTL
DDNS
mDNS
Zero Configuration Name
SLP Broadcast
On
Off
LPD Timeout
LPD Banner Page
On
Off
LPD Trailer Page
On
Off
LPD Carriage Return Conversion
On
OffLets you view or change the setting
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers...

Menu itemDescription
IPv6
Enable DHCPv6
Yes
NoEnables DHCPv6 in the printer
Note: No is the factory default setting.
E‑mail Server Setup menu
Use the following menu to configure the SMTP e‑mail server.
Menu itemDescription
E‑mail Server Setup
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway PortSpecifies SMTP server port information
Note: 25 is the default SMTP gateway port.
E‑mail Server Setup
SMTP Timeout
5–30Specifies the amount of time in seconds before the...

Menu itemDescription
E‑mail Server Setup
Limit destinationsSends an e-mail only when the address contains the domain name, such
as a company domain name
Notes:
E-mail can only be sent to the specified domain.
The limit is one domain.
E‑mail Server Setup
Web Link Setup
Server
Login
Password
Path
Base file name
Web LinkDefines the path name
Note: Defines the path. For example: /directory/path
The following characters or symbols are invalid entries for a path name:
* : ? < > |.
Active NIC menu
Menu...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting from the control panel and then exiting the menus
causes the printer to restart. The menu selection is updated.
Network Buffer
Auto
3k to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1k...

Standard USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if...

Menu itemDescription
Job Buffering
On
Off
AutoTemporarily stores jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
The On setting buffers jobs on the printer hard disk.
The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
Changing this setting from the control panel and then exiting the menus causes
the printer to restart. The menu selection is updated.
Mac Binary PS
On
Off
AutoSets the printer to process Macintosh...

Menu itemDescription
Packet Burst
On
OffReduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Off is the factory default setting.
NSQ/GSQ Mode
On
OffSets the NSQ/GSQ Mode setting
Note: Off is the factory default setting.
AppleTalk menu
Menu itemDescription
View Name
Shows the assigned AppleTalk name
View Address
Shows the assigned AppleTalk address
Activate
Off
OnActivates or deactivates AppleTalk support
Note: On is the factory...

English, French, German, and Spanish translations are stored in the printer. Other translations are available on the
Software and Documentation CD.
Menu itemDescription
Print all guides Prints all the guides
Information guide Provides help in locating additional information
Copy guide Provides information about making copies and changing settings
E‑mail guide Provides information about sending e‑mails using addresses, shortcut numbers,
or the address book, and changing settings
Fax guide Provides...