Lexmark X6575 User Manual

2Connect one telephone cord into the LINE port  of the printer, and then plug it into an active telephone wall
jack.
3Remove the protective plug from the EXT port  of the printer.
4Connect a second telephone cord from the telephone to the answering machine.
5Connect a third telephone cord from the answering machine to the EXT port  of the printer.
 
31
Downloaded From ManualsPrinter.com Manuals 

Connecting directly to a telephone wall jack
Connect the printer directly to a telephone wall jack to make copies or to send and receive faxes without using a
computer.
1Make sure you have a telephone cord and a telephone wall jack.
2Connect one end of the telephone cord into the LINE port  of the printer.
3Connect the other end of the telephone cord into an active telephone wall jack.
Connecting directly to a telephone wall jack in Germany
Connect the printer directly to a telephone wall jack to send...

4If you would like to use the same line for both fax and telephone communication, connect a second telephone
line (not provided) between the telephone and the F slot of an active telephone wall jack.
5If you would like to use the same line for recording messages on your answering machine, connect a second
telephone line (not provided) between the answering machine and the other N slot of the telephone wall jack.
Connecting to a computer with a modem
Connect the printer to a computer with a modem to send...

2Connect a telephone cord into the LINE port  of the printer, and then plug it into an active telephone wall jack.
3Remove the protective plug from the EXT port  of the printer.
4Connect a second telephone cord from the computer modem to the EXT port  of the printer.
Connecting to a telephone
Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or to send and receive faxes without using a computer....

Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see the related topic, “Using an RJ11 adapter.”
1Make sure you have the following:
A telephone
Two telephone cords
A telephone wall jack
2Connect one telephone cord to the LINE port  of the printer, and then plug it into an active telephone wall jack.
3Remove the protective plug from the EXT port  of the printer.
4Connect the other telephone cord to a telephone,...

Setting up to fax while behind a PBX
If the printer is being used in a business or office, it may be connected to a Private Branch Exchange (PBX) telephone
system. Ordinarily, when dialing a fax number, the printer waits to recognize the dial tone and then dials the fax
number. However, this method of dialing may not work if the PBX telephone system uses a dial tone that is not
recognizable to most fax machines. The “Dialing while behind a PBX” feature enables the printer to dial the fax
number without...

1
3
4
5
67
8
9
A
2
PressTo
1Turn the printer on and off.
Stop the print, copy, scan, or fax process.
2Print on both sides of the paper (duplex). A green backlight comes on when the duplex
function is activated.
Note: This button is not functional with a Macintosh operating system. You can print
two-sided documents with a Macintosh operating system by using the settings in the
Two-Sided menu of the Print dialog.
3Copy ModeAccess the copy default screen and make copies.
Note: The mode is selected when the...