Lexmark X652de MFP User Manual

Paper Loading menu
Menu itemDescription
Card Stock Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Card Stock as the paper type
Note: Off is the factory default setting.
Recycled Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Recycled as the paper type
Note: Off is the factory default setting.
Labels Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Labels as the paper type
Note: Off is the...

Menu itemDescription
Custom  Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default setting.
Custom  Loading is available only if the custom type is
supported.
Notes:
Duplex sets the printer default to 2‑sided printing for every print job unless 1‑sided printing is selected from Print
Properties in Windows or the Print dialog in Macintosh.
If Duplex is selected, all print jobs are sent through the duplex unit,...

Custom Scan Sizes menu
Menu itemDescription
Custom Scan Size 
Scan Size Name
Width
3–14.17 inches (76–360 mm)
Height
3–14.17 inches (76–360 mm)
Orientation
Landscape
Portrait
2 scans per side
Off
On
ADF Pick Roller Force
User Default
30%
40%
50%
60%
70%
80%Specifies a custom scan size name and options. This name replaces a Custom
Scan Size  name in the printer menus.
Notes:
8.5 Inches is the US factory default setting for Width. 216 millimeters is
the international factory default setting for Width.
14...

Menu itemDescription
Portrait Width
3–14 inches
76–360 mmSets the portrait width
Notes:
If the width exceeds the maximum, the printer uses the maximum
width allowed.
8.5 inches is the US factory default setting. Inches can be increased
in 0.01‑inch increments.
216 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Portrait Height
3–14 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, the printer uses the maximum
height...

Menu ItemDescription
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type AssignmentSpecifies configuration options for output bins
Notes:
Mailbox is the factory default setting.
The Mailbox setting treats each bin as a separate
mailbox.
The Link setting links together all available output
bins.
The Mail Overflow setting treats each bin as a
separate mailbox until a bin becomes full, and then
the printer automatically diverts sheets to an
overflow bin.
The Link Optional setting links together all...

Menu itemDescription
Device StatisticsPrints a report containing printer statistics such as supply information and details
about printed pages
Network Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only for network printers or printers connected
to print servers.
Network  Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information...

Menu itemDescription
Print DirectoryPrints a list of all the resources stored on an optional flash memory card or printer
hard disk
Notes:
Job Buffer Size must be set to 100%.
The optional flash memory or printer hard disk must be installed correctly
and working properly.
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Active NIC menu
Menu...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Network Buffer
Auto
3K to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in...

Menu itemDescription
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net  Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLinkFor descriptions and settings of the network setup menus, see the following:
“Network Reports menu” on page 170
“Network Card menu” on page 170
“TCP/IP menu” on page 171
“IPv6 menu” on page 172
“Wireless menu” on page 172
“AppleTalk menu” on page 173
“NetWare menu” on page 173
“LexLink menu” on...

Menu itemDescription
Device‑Initiated E‑mail
None
Use Device SMTP Credentials
User‑Initiated E‑mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and Password
Prompt User
Device Userid
Device password
Kerberos 5 Realm
NTLM DomainSpecifies server information
Notes:
The message boxes have a limitation of 512 characters.
None is the factory default setting for Device‑Initiated E‑mail and
User‑Initiated E‑mail.
Network Reports menu
This menu is available from...