Lexmark X644e User Manual

Moving the MFP
101
Maintaining the MFP
Moving the MFP
Follow these guidelines to move the MFP within the office or to prepare the MFP for shipment.
CAUTION: Follow these guidelines to avoid injuring yourself or damaging the MFP.
•Always use at least three people to lift the MFP.
•Always turn off the MFP using the power switch.
•Disconnect all cords and cables from the MFP before attempting to move the MFP.
•Failure to repackage the MFP properly for shipment can result in damage to the MFP not covered by...

4
Contents
Chapter 1: Learning about the MFP  .................................................................................. 8
Identifying the MFP  .......................................................................................................................................... 8
Using the scanner  ............................................................................................................................................ 9
Configured models...

Access doors and trays
103
Clearing jams
Access doors and trays
The following illustration shows the path that print media travels through the MFP. The path varies depending on the input 
source (trays, multipurpose feeder, envelope feeder) you are using.
The numbers in following illustration indicate the numbers that can appear on the control panel and designate the general 
area of a paper jam.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
a...

Clearing jams
104
Clearing jams
Clearing jams
Although there are several places a jam can occur, clearing the paper path is fairly easy. Paper jams can occur in three 
areas: the front of the MFP, inside the MFP, and at the rear of the MFP. Jams in the front of the MFP occur in the input 
options or the duplex tray. Jams inside the MFP occur in two locations and require the removal of the print cartridge. Jams 
can also occur at the rear of the MFP or duplex unit.
Note:The following clearing jam...

Clearing jams
105
Clearing jams
260 Paper Jam Check Env Feeder
The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed.
1Lift the envelope weight.
2Remove all envelopes.
If the jammed envelope has entered the MFP and cannot be pulled out, remove the envelope feeder.
aLift the envelope feeder out of the MFP, and then set it aside.
bRemove the envelope from the MFP.
Note:If you cannot remove the envelope, the print cartridge will have to be...

Clearing jams
106
Clearing jams
4Load the envelope feeder.
5Adjust the guide.
6Lower the envelope weight.
7Touch Continue.
23x and 24x jams
Paper jams in these areas can occur on the incline surface of a tray or across more than one tray. To clear these areas:
1Open the MFP paper tray, and remove any jammed media.
Downloaded From ManualsPrinter.com Manuals 

Clearing jams
107
Clearing jams
2Open the duplex tray.
To remove the media, pull up.
3Open any optional trays beginning at the top, and remove any jammed media.
Pull the print media either up or down. If it does not pull easily one way, try the other way.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
must have a printer stand or printer base....

Clearing jams
108
Clearing jams
4If you have an optional 2000-sheet feeder, open the front door, press the elevator button to lower the tray, remove 
the jam, and make sure the stack of print media is neat and aligned.
5Touch Continue.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
must have a printer stand or printer base. More information is...

Clearing jams
109
Clearing jams
200 and 201 Paper Jam Remove Cartridge
1Push the release latch, and lower the multipurpose feeder.
2Push the release latch, and open the top front cover.
CAUTION: The inside of the MFP may be hot. Allow the MFP to cool before touching any internal 
components.
3Lift and pull the print cartridge out of the MFP.
Warning:Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge handle 
whenever you are holding the cartridge.
4Place the print...

Clearing jams
110
Clearing jams
5Pull the print media up and toward you.
CAUTION: Do not use any pointed objects to remove the paper. This could cause personal injury or damage 
to the MFP.
Warning:If the print media does not move immediately when you pull, stop pulling. You need to access the 
print media from the MFP rear door. 
6Align and reinstall the toner cartridge.
7Close the top front cover.
8Close the multipurpose feeder.
9Touch Continue.
Downloaded From ManualsPrinter.com Manuals