Lexmark X264dn User Manual

4Select the printer from the list.
5Click Add.
In Mac OS X version 10.4 and earlier
1From the Go menu, choose Applications.
2Double‑click Utilities.
3Locate and double‑click Printer Setup Utility or Print Center.
4From the Printer List, choose Add.
5Select the printer from the list.
6Click Add.
bFor AppleTalk printing:
In Mac OS X version 10.5
1From the Apple menu, choose System Preferences.
2Click Print & Fax.
3Click +.
4Click AppleTalk.
5Select the printer from the list.
6Click Add.
In Mac OS X version...

If the CD does not launch after a minute, then do the following:
aClick , or click Start and then click Run.
bIn the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
2Click Install Printer and Software.
3Click Agree to agree to the License Agreement.
4Select Suggested, and then click Next.
Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select
Custom and follow the on‑screen instructions.
5Select Wired...

In Mac OS X version 10.5 or later
1
From the Apple menu, choose System Preferences.
2Click Print & Fax.
3Click +.
4Click IP.
5Type in the IP address of your printer in the Address field.
6Click Add.
In Mac OS X version 10.4 and earlier
1
From the Finder desktop, choose Go > Applications.
2Double‑click Utilities.
3Double‑click Printer Setup Utility or Print Center.
4From the Printer List, click Add.
5Click IP.
6Type in the IP address of your printer in the Address field.
7Click Add.
For AppleTalk...

Minimizing your printers environmental impact
Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact
on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide
collection and recycling programs. For more information, see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
The Lexmark recycling program at...

Choose scanning
You can avoid making a paper output of a document or photograph by scanning it to save to a computer program,
application, or flash drive. For more information, see:
“Scanning to a computer” on page 103
“Scanning to a flash drive” on page 104
Check your first draft for accuracy
Before printing or making multiple copies of a document:
Use the Lexmark preview feature, which you can select from the Print dialog, the Lexmark Toolbar, or the printer
display, to see what the document will look...

4Press the arrow buttons until Eco‑Mode appears, and then press .
5Select the setting you want, and then press.
Submitting changes appears.
Adjusting Power Saver using the printer control panel
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow buttons until Settings appears, and then press .
4Press the arrow buttons until General Settings appears, and then press .
5Press the arrow buttons until Timeout appears, and then press .
6Press the arrow...

Recycling Lexmark products
To return Lexmark products to Lexmark for recycling:
1Visit our Web site at www.lexmark.com/recycle.
2Find the product type you want to recycle, and then select your country from the list.
3Follow the instructions on the computer screen.
Recycling Lexmark packaging
Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported
in the most efficient and environmentally sensitive manner and that there is less packaging to...

ChooseTo
On Reduce printer noise.
You may notice a reduction in processing speed.
Printer engine motors do not start until a job is ready to print. You may notice a short
delay before the first page is printed.
Fans run at a reduced speed or are turned off.
If your printer has faxing capability, fax sounds are reduced or disabled, including
the fax speaker and ringer.
Off Use factory default settings. This setting supports the performance specifications for
your printer.
To select a Quiet Mode setting:...

Loading paper and specialty media
This section explains how to load the trays and feeders. It also includes information about paper orientation, setting
the Paper Size and Paper Type, and linking and unlinking trays.
Setting the Paper Size and Paper Type
After you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any
trays containing the same size and type are automatically linked by the printer.
Note: If the size of the paper being loaded now is the...

Specify a unit of measurement
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
Paper Menu appears.
3Press .
4Press the arrow buttons until Universal Setup appears, and then press .
5Press the arrow buttons until Units of Measure appears, and then press .
6Press the arrow buttons until the correct unit of measure appears, and then press .
Submitting Changes appears, followed by the Universal Setup menu.
Specify the paper height and width
Defining a specific height...