Lexmark X 2600 Instruction Manual

2Remove all tape and packing material from all areas of the printer.
3Extend the paper exit tray, and then raise the paper support.
12
4Extend the paper guides.
5Connect the power cord, and then make sure the power is on.
2
1
 
11 

6Open the printer, and then press down on the levers.
7Remove the tape from the black cartridge, insert the cartridge in the left carrier, and then close the black cartridge
carrier lid.
 
12 

8Remove the tape from the color cartridge, insert the cartridge in the right carrier, and then close the color cartridge
carrier lid.
9Close the printer, and then load paper.
1
2
3
 
13 

10Press and hold the  button for three seconds.
An alignment page prints.
11Place the printed page on the scanner glass.
12Press the  button.
 
14 

13Discard the alignment page.
Notes:
The alignment page may differ from the one shown.
Streaks on the alignment page are normal, and do not indicate a problem.
Understanding the parts of the printer
1
2 345
6
7
Use theTo
1Paper supportLoad paper.
2Printer control panelOperate the printer.
3Paper exit trayHold paper as it exits.
4Top coverAccess the scanner glass.
5Paper feed guardPrevent small objects from falling inside the printer.
 
15 

Use theTo
6Paper guideKeep paper straight when feeding.
7Scanner glassCopy, scan, fax, or remove an item.
1
2
34
5
Use theTo
1Scanner unitAccess the print cartridges.
2Scanner supportHold up the scanner unit.
3Print cartridge carrierInstall, replace, or remove a print cartridge.
4Power supply with portConnect the printer to a power source.
5USB portConnect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging
in or removing a USB cable.
 
16 

Using the printer control panel
1
2
3
4
5
6 7 8
PressTo
1Start a color copy of a document or photo.
2Start a black-and-white copy of a document or photo.
3Start a 4 x 6-inch color photo copy.
4Scan a document or photo to the computer.
5Load or eject paper.
6Turn the printer on or off.
Cancel a print, copy, or scan job in progress.
Reset the printer.
7Cancel a print, copy, or scan job in progress.
8Set the number of copies.
 
17 

1
2
3
CheckTo
1The displayDetermine the number of copies to be printed.
2
The  light
Determine if the color print cartridge needs to be replaced.
Determine if the color print cartridge is missing or invalid.
3
The  light
Determine if the black or photo print cartridge needs to be replaced.
Determine if the black or photo print cartridge is missing or invalid.
 
18 

Understanding the printer software
Installing printer software
Using Windows
1Close all open software programs.
2Insert the printer software CD.
3From the main installation screen, click Install.
4Follow the instructions on the screens.
Using Macintosh
1Close all open software applications.
2Insert the printer software CD.
3From the Finder desktop, double-click the printer CD icon that automatically appears.
4Double-click the Install icon.
5Follow the instructions on the screens.
Using the World Wide...

3Double-click the CD or DVD drive icon, and then double-click Drivers.
4Double-click xps, and then double-click the setupxps file.
XPS driver files are copied to your computer, and any required Microsoft XPS files are launched. Follow the
instructions on the screen to finish installing the patch.
To install the XPS driver:
1Click ΠControl Panel.
2Under Hardware and Sound, click Printer, and then click Add a Printer.
3From the Add Printer dialog, click Add a local printer.
4From the “Use an existing...