Lexmark T652n User Manual

Menu itemDescription
Job Waiting
On
OffSpecifies that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally. When
the missing information and/or options are obtained, the stored
jobs print.
Notes:
Off is the factory default setting.
This menu appears only if a non-Read Only printer hard disk
is installed. This requirement ensures that stored jobs are
not deleted if the printer...

Menu itemDescription
Job Accounting
On
OffSpecifies whether the printer stores statistical information about
the most recent print jobs on the hard disk
Notes:
Off is the factory default setting. Off means the printer does
not store job statistics.
The statistics include a record of print errors, the print time,
the job size in bytes, the requested paper size and type, the
total number of printed pages, and the total number of
copies requested.
Job Accounting is available only when a printer hard disk...

Finishing menu
Menu itemDescription
Sides (Duplex)
2 sided
1 sidedSpecifies whether duplex (2‑sided) printing is set as the default for all print jobs
Notes:
1 sided is the factory default setting.
To set 2‑sided printing from the software program: for Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup; for
Macintosh users, choose File > Print, and then adjust the settings from the
Print dialog and pop‑up menus.
Duplex Binding
Long Edge
Short EdgeDefines the way...

Menu itemDescription
Separator Source
Tray 
Multi‑Purpose Feeder
Envelope FeederSpecifies the paper source for separator sheets
Notes:
Tray 1 (standard tray) is the factory default setting.
From the Paper menu, Configure MP must be set to Cassette in order for
Multi‑Purpose Feeder to appear as a menu setting.
N‑up (pages‑side)
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑UpSpecifies that multiple‑page images be printed on one side of a sheet of paper
Notes:
Off is the factory default setting.
The number...

Quality menu
Menu itemDescription
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image QSpecifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both DirectionsEnhances the printed quality of small fonts and graphics
Notes:
Off is the factory default setting.
Fonts applies this setting only to text.
Horizontally darkens horizontal lines of text and images.
Vertically darkens...

Utilities menu
Menu itemDescription
Remove Held Jobs
Confidential
Held
Not Restored
AllRemoves confidential and held jobs from the printer hard disk
Notes:
Selecting a setting affects only print jobs that are resident in the printer.
Bookmarks, jobs on flash drives, and other types of held jobs are not affected.
Selecting Not Restored removes all Print and Hold jobs that were not restored
from the disk.
Format Flash
Yes
NoFormats the flash memory. Flash memory refers to the memory added by installing
a...

Menu itemDescription
LCD Contrast
1–10Adjusts the contrast lighting of the display
Notes:
5 is the factory default setting.
A higher setting makes the display appear lighter.
A lower setting makes the display appear darker.
LCD Brightness
1–10Adjusts the brightness of the backlight on the display
Notes:
5 is the factory default setting.
A higher setting makes the display appear lighter.
A lower setting makes the display appear darker.
XPS menu
Menu itemDescription
Print Error Pages
Off
OnPrints a page...

Menu itemDescription
Font Priority
Resident
Flash/DiskEstablishes the font search order
Notes:
Resident is the factory default setting.
A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
The flash memory option or printer hard disk cannot be Read/Write,
Write, or password protected.
Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu itemDescription
Font Source
Resident
Disk
Download
Flash...

Menu itemDescription
PCL Emulation Settings
Point Size
1.00–1008.00Changes the point size for scalable typographic fonts
Notes:
12 is the factory default setting.
Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
Point sizes can be increased or decreased in 0.25‑point increments.
PCL Emulation Settings
Pitch
0.08–100Specifies the font pitch for scalable monospaced fonts
Notes:
10 is the factory default setting.
Pitch refers to the number of...

Menu itemDescription
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray 
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Man Env
Off
None
0–199Configures the printer to work with printer software or programs that use
different source assignments for trays, drawers, and feeders
Notes:
Off is the factory default setting.
None is not an available selection. It is only displayed when it is selected
by the PCL 5 interpreter.
None ignores the Select Paper Feed command.
0–199 allows a custom...