Lexmark T650dn User Manual

DescriptionWhere to find (North America)Where to find (rest of world)
E-mail supportFor e-mail support, visit our Web site:
www.lexmark.com.
1Click SUPPORT.
2Click Technical Support.
3Select your printer type.
4Select your printer model.
5From the Support Tools section, click
e-Mail Support.
6Complete the form, and then click
Submit Request.E‑mail support varies by country or region,
and may not be available in some instances.
Visit our Web site at www.lexmark.com.
Select a country or region, and then...

1
2
3
4
56
7
9
8
Feature/OptionPaper Capacity1
1
5‑bin mailbox2500 sheets
25‑bin mailbox 500 sheets
3Envelope feeder 85 envelopes
4Standard tray (Tray 1) 250 or 550 sheets
5
Duplex unit
3Not applicable
6Optional tray (Tray 2) 250 or 550 sheets
7Optional tray (Tray 3) 250 or 550 sheets
8Optional 2000‑sheet tray (Tray 4) 2000 sheets
9Caster base Not applicable
1 Based on 75 g/m2 (20 lb.) paper.
2 The printer supports up to three output expander units, two 5-bin mailboxes, one high capacity output expander...

Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, leave enough room for them also. It is important to:
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
–Away from the direct airflow of air conditioners, heaters, or ventilators
–Free from direct sunlight, humidity extremes, or temperature...

Understanding the printer control panel
1234
5 6
7 8 9
ItemDescription
1Display Shows messages and pictures that communicate the status of the printer
2Navigation buttons
Press the up or down arrow buttons to scroll through menus or menu items, or to increase or
decrease a value when entering numbers.
Press the left or right arrow buttons to scroll through menu settings (also called values or
options), or to scroll through text that rolls to another screen.
3Select
Opens a menu item and displays the...

ItemDescription
8Menu
Opens the menu index
Note: The menus are available only when the printer is in the Ready state.
9USB port Insert a flash drive into the front of the printer to print saved files.
Note: Only the front USB port supports flash drives.
Learning about the printer15
Downloaded From ManualsPrinter.com Manuals 

Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Available internal options
Memory cards
–Printer memory
–Flash memory
–Fonts
Firmware...

Accessing the system board to install internal options
Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
1Open the system board door....

3Remove the system board cover.
4Use the illustration below to locate the appropriate connector.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or connectors.
1
2
3
1Firmware and flash memory card connectors
2Memory card connector
3Lexmark Internal Solutions Port or printer hard disk connector
Additional printer setup18
Downloaded From ManualsPrinter.com...

Installing a memory card
Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are...

4Align the notches on the memory card with the ridges on the connector.
2
1
1Notches
2Ridges
5Push the memory card straight into the connector until it snaps into place.
6Replace the system board cover and close the system board door.
1
2
3
Installing a flash memory or firmware card
Note: This task requires a flathead screwdriver. Additional printer setup20
Downloaded From ManualsPrinter.com Manuals