Lexmark Interact S605 User Manual

10If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
11Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device using the printer software
1Load photo paper.
2Insert a memory card or flash drive.
3Transfer or print the photos:
If the printer is using a USB connection
For Windows users
Fast Pics launches automatically when you insert...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB...

Printing photos from a memory device using the proof sheet
1Load letter- or A4-size plain paper.
2Insert a memory card or flash drive.
The Memory Device screen appears on the display.
3Navigate to Print Proof Sheet:
More Options > Proof Sheet > Print Proof Sheet
4Select which photos you want to print.
You can print a proof sheet:
For the 20 most recent photos, if there are 20 or more photos on the memory device.
For all photos on the memory device.
By date, if the photos on the card were taken on...

The Bluetooth-enabled device you are using requires users to set up a Bluetooth connection on every print job. For
more information, see the documentation for your Bluetooth device.
The name of the Bluetooth device you are using is automatically deleted from the Bluetooth device list.
When the Bluetooth security level is set to High, the printer saves a list of up to eight Bluetooth devices that have
previously set up a connection with the printer. When the printer detects more than eight devices, the...

Setting the Bluetooth security level
1Insert a Bluetooth USB adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the home screen, navigate to Security Level:
 > Bluetooth Setup > Security Level
3Select the security level, and then touch Accept.
Low—Allow Bluetooth devices to connect and send print jobs to your printer without requiring users to enter
a pass key.
High—Require users to enter a four-digit numeric...

1Insert a USB Bluetooth adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Warning—Potential Damage: Do not touch any cables, any network adapter, any
connector, the USB Bluetooth adapter, or the printer in the areas shown while
actively printing, reading, or writing from a Bluetooth-enabled device. A loss of
data can occur.
Notes:
A Bluetooth adapter is not included with the printer.
Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth...

Printing on both sides of the paper (duplexing)
Printing on both sides of the paper (duplexing) automatically
The automatic duplex unit, available only on select printer models, supports A4- and letter-size paper. If you purchased
a model without automatic duplex, or if you need to print duplex using other paper sizes, then see the instructions for
printing on both sides of the paper (duplexing) manually.
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences,...

9From the Two-Sided pop-up menu, choose Long-Edge binding or Short-Edge binding.
For Long-Edge binding, pages are bound along the long edge of the page (left edge for portrait, top edge for
landscape).
Portrait Landscape
1
2
12
For Short-Edge binding, pages are bound along the short edge of the page (top edge for portrait, left edge for
landscape).
Portrait Landscape
10Click Print.
Setting the duplex printing dry time (Macintosh only)
In Mac OS X version 10.6
1From the Apple menu, navigate to:
System...

Printing on both sides of the paper (duplexing) manually
For Windows users
1With a document open, click File  Print.
2Click Properties, Preferences, Options, or Setup.
3Click the Advanced tab.
4From the 2-Sided Printing section, select Manual.
Note: The Print Instruction Page to Assist in Reloading item is selected automatically.
5Click OK. The printer prints the odd-numbered pages and the instruction sheet.
6Flip and reload the paper, following the directions on the instruction sheet to complete the...

5After printing the first set of pages, flip and reload the paper.
3
1
2
6Repeat steps 1 and 2.
7From the Print or “Pages to print” pop-up menu, select to print the even-numbered pages.
8Click Print.
Managing print jobs
Setting your printer as the default printer
Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually
select your printer, then it is not the default printer.
To set the default printer:
For Windows users
1Click , or click Start...