Lexmark E350d User Manual

Administrative support
61 8
Administrative support
Disabling control panel menus
Since many people could be using the printer, an administrator may choose to lock the control panel menus to keep others 
from changing menu settings from the control panel.
Note:Disabling the control panel menus does not prevent access to Print and Hold functionality.
To disable the control panel menus so that changes cannot be made to the printer default settings:
1Turn the printer off.
2Press and hold  and  while turning...

Restoring factory default settings
62Administrative support
Restoring factory default settings
When you first enter the printer menus from the control panel, you may notice an asterisk (*) to the left of a value in the 
menus. This asterisk indicates the factory default setting. These settings are the original printer settings. (Factory defaults 
may vary for different regions.)
When you select a new setting from the control panel, Submitting Selection appears. When the Submitting Selection 
message...

Setting security using the Embedded Web Server (EWS)
63Administrative support
Setting the system password
Setting the system password protects configuration of the Embedded Web Server. A system password is also required for 
Secure mode and confidential communication with MVP.
To set the system password:
1Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the 
format: http: //ip_address/.
2Click Configuration.
3Under Other Settings, click...

Setting security using the Embedded Web Server (EWS)
64Administrative support
Locking the control panel menus
Control panel Menu Lockout lets you create a PIN number and choose specific menus to lock. Each time a locked menu is 
selected, the user will be prompted to enter the correct PIN at the control panel. The PIN does not affect any access 
through the EWS. To lock control panel menus:
1Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the...

Notices
65 Notices
Conventions
Electronic emission notices
Federal Communications Commission (FCC) 
compliance information statement
The Lexmark E350d and E352dn (4512-420 and 4512-430) have 
been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any 
interference received, including interference that may...

Electronic emission notices
66Notices
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation 
and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed 
for use within certain voltage limits.
A declaration of conformity with the requirements of the directives has been signed by the Director of...

Noise emission levels
67Notices
Noise emission levels
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Product energy consumption
The following table documents the power consumption characteristics of the product
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be 
substantially higher than the average. Sleep / Power Saver mode can be modified from the printer control...

Waste from Electrical and Electronic Equipment (WEEE) directive
68Notices
Waste from Electrical and Electronic Equipment (WEEE) 
directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We 
encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at 
www.lexmark.com for your local sales office phone number.
Laser advisory label
A laser notice label may be...

Statement of Limited Warranty for Lexmark E350d and E352dn
69Notices
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at 
Lexmarks option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. 
To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to...

Statement of Limited Warranty for Lexmark E350d and E352dn
70Notices
Additional rights
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or 
consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.Downloaded From ManualsPrinter.com Manuals