Lexmark E260d User Manual

							Light sequenceWhat to do
Hex Trace Ready
 - Slowly Blinking
Use Hex Trace to troubleshoot
printing problems. Turn the printer
off, and then on to return to the
Ready state.
Busy
 - Blinking
Wait or press .
Flushing Buffer
 - Blinking
 - Blinking
Wait until the printer returns to the
Ready state.
Interpreting the printer control panel lights
31
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequenceWhat to do
Waiting
 - On
 - On
Wait for the light sequence to clear.
Canceling job
 - On
 - On
 - On
 - On
 - On
 - On
Wait for the light sequence to clear.
Invalid Engine Code or Invalid Network Code
 - On
 - On
Press  twice to get the secondary
message.
Use valid code when programming
the printer.
Interpreting the printer control panel lights
32
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequenceWhat to do
Not ready
 - On
Press and release either  or  to
return to the Ready state.
Cartridge error
 - On
 - On
Replace the toner cartridge with
one suitable for your region.
Note: This LED pattern also
indicates other problems with the
cartridge. Press 
 twice quickly to
see the secondary message. For
more information, see
“Understanding the secondary
error light sequences” on
page 36.
Front door is open
 - On
Close the front door.
Interpreting the printer control panel lights
33
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequenceWhat to do
No paper in Tray 1 or Tray 2
 - On
 - On
Load paper in Tray 1 or Tray 2, and
then press 
 or .
No paper in the manual feeder
 - On
Load paper in the manual feeder.
Remove paper from the standard exit bin
 - Blinking
Remove printed pages from the
standard exit bin, and then press
and release 
 to clear the light
sequence and continue printing.
Interpreting the printer control panel lights
34
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequenceWhat to do
Cartridge is low
 - On
 - On
Press and release  to clear
the light sequence and continue
processing the print job.
With the printer turned off,
remove the toner cartridge and
shake it to extend its life.
Replace the toner cartridge,
and then turn the printer on.
PC Kit life warning
 - On
Press and release  to clear
the light sequence and continue
processing the print job.
Replace the photoconductor
kit.
The following light sequences show that there is a secondary error code or secondary jam code to read:
Light sequenceWhat to do
Printer error
 - On
 - On
Press  twice quickly to see the
secondary error code.
Interpreting the printer control panel lights
35
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequenceWhat to do
Paper jam
 - On
 - On
Press  twice quickly to see the
secondary paper jam code.
Understanding the secondary error light sequences
When the  and  lights are on simultaneously, press  twice quickly to see the secondary error code.
Printer control panelLights and buttons
1Error
2Jam
3Load paper
4Toner
5Ready
6Continue
7Stop
Interpreting the printer control panel lights
36
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequencesWhat you can do
Complex page, some data may not have printed
 - On
 - On
 - On
Press either  or  to clear the
light sequence.
Insufficient memory to collate job
 - On
 - On
 - On
Press  to print the remaining
pages of the job.
Insufficient memory to support Resource Save feature
 - On
 - Blinking
 - On
Install additional printer
memory.
Press either  or  to clear the
light sequence. Job will be
printed without Resource Save.
Interpreting the printer control panel lights
37
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequencesWhat you can do
Host interface disabled
 - On
 - Blinking
 - Blinking
 - On
Press  to clear the code. The
printer discards any print jobs
previously sent.
Paper size is small
 - On
 - On
 - On
 - On
Ensure that the paper you loaded
is large enough.
Clear any paper jam.
Press  to clear the code and
continue the print job.
Cartridge region mismatch
 - On
 - Blinking
 - On
Replace the toner cartridge with one
that is suitable for your region. For
more information, see “Replacing
the toner cartridge” on page 86.
Interpreting the printer control panel lights
38
Downloaded From ManualsPrinter.com Manuals 
						

							Light sequencesWhat you can do
Replace missing or defective cartridge
 - On
 - Blinking
 - On
Replace the toner cartridge. For
more information, see “Replacing
the toner cartridge” on page 86.
Cartridge part number not supported by device
 - On
 - On
 - On
Remove the toner cartridge and
replace it with a supported toner
cartridge. For more information, see
“Replacing the toner cartridge” on
page 86.
Interpreting the printer control panel lights
39
Downloaded From ManualsPrinter.com Manuals 
						

							Loading paper and specialty media
This section explains how to load the 250- and 550-sheet trays, and the manual feeder. It also includes information
about setting the Paper Size and Paper Type.
Setting the paper size and type
Ensure that the settings for the trays reflect the size and type of paper loaded in the trays. The factory default paper
type setting is plain paper, so the paper type setting must be set manually for all trays that do not contain plain paper.
If the printer is on a network, access the Embedded Web Server by typing the IP address of the printer in the address
bar of a Web browser. From the Settings tab, click Paper Menu.
If the printer is connected to a computer by a USB or parallel cable, use one of the following utilities to access the Paper
menu, depending on your operating system:
For Windows users, access the Paper menu through the Local Printer Settings Utility.
For Macintosh users, access the Paper menu through the Printer Settings.
Note: The Paper Size and Type settings will be saved until you reset factory default settings. If you would like to override
the Paper Size and Type settings for a special print job, do one of the following:
For Windows users, click File  Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users, choose File > Print, and then adjust the settings from the print dialog and pop-up menus.
Configuring Universal paper settings
The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer
menus. Defining a specific height and width measurement for the Universal paper size, in the portrait orientation,
allows the printer to support the size. Specify all of the following Universal size settings for your paper:
Units of measure (inches or millimeters)
Portrait Width
Portrait Height
Note: The smallest supported Universal size is 76.2 x 127 mm (3  x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).
If the printer is connected to a computer by a USB or parallel cable, open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh. One of these utilities installs with your printer software. Under the
Paper menu, select Universal in the Paper Size selection box for the tray that will contain the Universal paper.
Loading the standard 250-sheet tray
The printer has two trays to select from: the standard tray (Tray 1), also known as the 250-sheet tray, and either the
optional 250-sheet tray or the optional 550-sheet tray (Tray 2). Only one optional drawer (which includes an optional
tray) may be attached to the printer at a time.
Loading paper and specialty media
40
Downloaded From ManualsPrinter.com Manuals