Lexmark C734dn User Manual

3Locate and double‑click Printer Setup Utility or Print Center.
4From the Printer List, choose Add.
5Choose the Default Browser tab.
6Click More Printers.
7From the first pop‑up menu, choose AppleTalk.
8From the second pop‑up menu, select Local AppleTalk zone.
9Select the printer from the list.
10Click Add.
Installing the printer on a wired network
These instructions apply to Ethernet and fiber optic network connections.
Before you install the printer on a wired network, make sure that:
You have...

3Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you
are configuring access for computers on a different subnet than the printer.
4Install the drivers and add the printer.
aInstall a PPD file on the computer:
1Insert the Software and Documentation CD in the CD or DVD drive.
2Double-click the installer package for the printer.
3From the Welcome screen, click Continue.
4Click Continue again after viewing the Readme file.
5Click Continue after...

In Mac OS X version 10.4 and earlier
1
From the Finder desktop, choose Go > Applications.
2Double‑click Utilities.
3Double‑click Printer Setup Utility or Print Center.
4From the Printer List, click Add.
5Choose the Default Browser tab.
6Click More Printers.
7From the first pop‑up menu, choose AppleTalk.
8From the second pop‑up menu, select Local AppleTalk zone.
9Select the printer from the list.
10Click Add.
Note: If the printer doesnt show up in the list, you may need to add it using the IP address....

3Locate the printer that has changed.
Note: If there is more than one copy of the printer, then update all of them with the new IP address.
4Right‑click the printer.
5Click Properties.
6Click the Ports tab.
7Locate the port in the list, and then select it.
8Click Configure Port.
9Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network
setup page you printed in step 1.
10Click OK, and then click Close.
For Macintosh users
1Print a network setup...

eSelect the printer from the list.
fClick Add.
In Mac OS X version 10.4 and earlier
a
From the Go menu, choose Applications.
bDouble‑click Utilities.
cDouble‑click Printer Setup Utility or Print Center.
dFrom the Printer List, click Add.
eChoose the Default Browser tab.
fClick More Printers.
gFrom the first pop‑up menu, choose AppleTalk.
hFrom the second pop‑up menu, select Local AppleTalk zone.
iSelect the printer from the list.
jClick Add.
Setting up serial printing
In serial printing, data is...

iMake sure the box next to the selected printer model is checked.
jSelect any other optional software you want to install, and then click Next.
kClick Finish to complete the printer software installation.
3Set the COM port parameters:
After the printer driver is installed, you must set the serial parameters in the COM port assigned to the printer
driver.
The serial parameters in the COM port must match the serial parameters you set in the printer.
aOpen the Device Manager.
1Click , or click Start and...

Minimizing your printers environmental impact
Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact
on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide
collection and recycling programs. For more information, see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
The Lexmark recycling program at...

Use both sides of the paper
If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper
by selecting 2‑sided printing from the Print dialog or the Lexmark Toolbar.
Place multiple pages on one sheet of paper
You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by
selecting a setting from the Multipage printing (N‑Up) section of the Print dialog.
Check your first draft for accuracy
Before...

5Press the up or down arrow button until Eco‑Mode appears, and then press .
6Press the left or right arrow button to scroll through the list of possible settings. Press  at the correct setting.
Submitting Selection appears.
Reducing printer noise
Use Quiet Mode to reduce printer noise.
Note: See the table for the multiple settings that change when you select a Quiet Mode setting.
ChooseTo
On (Text/Graphics)
Note: This setting is best suited for printing text and line
graphics.Reduce printer noise.
Print...

Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2Click Settings, and then click General Settings.
3Click Timeouts.
4In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
5Click Submit.
Using the printer control panel
1
Make sure the...