Lexmark C546dtn User Manual

Menu itemsDefinition
Rough/Cotton Paper Weight
NormalIdentifies the relative weight of the rough/cotton
paper loaded
Notes:
Normal is the factory default setting.
Settings appear only if rough/cotton paper is
supported.
Custom 
Normal
Light
HeavyIdentifies the relative weight of the custom paper
type loaded
Notes:
Normal is the factory default setting.
Settings appear only if custom paper is
supported.
Paper Loading menu
Note: Certain options are not available on select printer models.
Menu...

Menu itemDescription
Heavy Paper Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify Heavy
Paper as the paper type
Note: Off is the factory default setting.
Rough/Cotton Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Rough/Cotton as the paper type
Note: Off is the factory default setting.
Custom  Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default...

Universal Setup menu
Menu itemDescription
Units of Measure
Inches
MillimetersIdentifies the units of measure
Notes:
Inches is the US factory default setting.
Millimeters is the international factory default setting.
Portrait Width
3–14.17 inches
76–360 mmSets the portrait width
Notes:
If the width exceeds the maximum, then the printer uses the maximum
width allowed.
8.5 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
216 mm is the international factory default...

Device Statistics menu
Menu itemDescription
Device StatisticsPrints a report containing printer statistics such as supply information and details
about printed pages
Note: The page prints when this item is selected.
Network Setup Page menu
Menu itemDescription
Network Setup PagePrints a report containing information about the network settings, such as TCP/IP
address information
Notes:
This menu item appears only for printers with a network print server
installed.
The page prints when this item is...

Network/Ports
Active NIC menu
Menu itemDescription
Active NIC
Auto
Shows the print server
Notes:
Auto is the factory default setting.
This menu item appears only if an optional network card is installed.
Network menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data....

Menu itemDescription
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
Network Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalkSets printer settings on jobs sent through a network port
Note: Certain options are not available on selected printer models.
Reports menu
This menu is available...

Menu itemDescription
Banner Page
Off
OnAllows the printer to print a banner page
Note: Off is the factory default setting.
TCP/IP menu
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  TCP/IP
Menu itemDescription
Activate
On
OffActivates TCP/IP
Note: On is the factory default setting.
View HostnameLets you view the current TCP/IP hostname
Note: This can be changed only from the...

IPv6 menu
Note: The Internet Protocol version 6 (IPv6) menu is available only for network models or printers attached to print
servers.
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  IPv6
Menu itemDescription
Enable IPv6
On
OffEnables IPv6 in the printer
Note: On is the factory default setting.
Auto Configuration
On
OffSpecifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default...

Menu itemDescription
View Signal QualityLets you view the quality of the wireless connection
View Security ModeLets you view the encryption method for the wireless connection
AppleTalk menu
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  AppleTalk
Menu itemDescription
Activate
Yes
NoActivates AppleTalk support
Note: Yes is the factory default setting.
View NameShows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
View...

Menu itemDescription
NPA Mode
Auto
OffSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting from the printer control panel and then exiting the menus
causes the printer to restart. The menu selection is updated.
USB Buffer
Auto
DisabledSets the size of the USB input buffer
Notes:
Auto is the factory default setting.
Changing this setting from the...