Lexmark C543dn User Manual

200–202 and 230 paper jams
1If the jam is in the paper tray:
aGrasp the handle, and pull the standard 250-sheet tray (Tray 1) and manual feeder out.
bRemove the jam.
Note: Make sure all paper fragments are removed.
cInsert the tray.
dPress .
2If the jam is inside the printer:
aGrasp the front door at the side handholds, and then pull it toward you to open it.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before...

bIf the jam is visible, remove the jammed paper.
Note: Make sure all paper fragments are removed.
cIf the jam is in the fuser area, grasp the green lever, and then pull the fuser cover toward you
dHold the fuser cover down, and then remove the jammed paper.
The fuser cover closes when released.
Clearing jams
122
Downloaded From ManualsPrinter.com Manuals 

Note: Make sure all paper fragments are removed.
eClose the front door.
fPress .
231 and 235 paper jams
1Grasp the front door at the side handholds, and then pull it toward you to open it.
2Remove the jam.
3Load the tray with the correct paper size.
4Insert the tray.
5Close the front door.
6Press .
Clearing jams
123
Downloaded From ManualsPrinter.com Manuals 

24x paper jam
1Grasp the handle, and pull the optional 550-sheet tray out.
Note: The optional 550-sheet tray is not available on all printer models.
2Remove the jammed paper.
Note: Make sure all paper fragments are removed.
3Insert the tray.
4Press .
250 paper jam
1Push the lever in the multipurpose feeder down to access the jammed paper.
2Remove the jam.
Note: Make sure all paper fragments are removed.
3Insert the tray.
4Press .
Clearing jams
124
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting
Understanding printer messages
Calibrating
The printer is adjusting the color. Wait for the message to clear.
Close door
Close the upper and lower doors.
Insert Tray 
Insert the specified tray into the printer.
Reload printed pages in Tray 
Press  to clear the message and continue processing the second side of the sheet.
Press , and then press  to cancel printing.
Load  with 
Try one or more of the following:
Load the specified paper to clear the message and continue printing.
Press , and...

Load  with  
Try one or more of the following:
Load the paper tray or other source with the correct paper type and size.
Press , and then press  to cancel the print job.
Load single sheet feeder with 
Try one or more of the following:
Load the manual feeder with the correct paper type and size.
If there is no paper in the feeder, load a sheet, and then press 
 to clear the message and continue printing.
Press  to clear the message and continue printing.
The printer manually overrides the request, and...

Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Unsupported USB hub, please remove
Remove the unrecognized USB hub.
Unplug and change mode
Make sure that the camera is in a valid mode for PictBridge
30  Toner Cart Missing
Insert the missing toner cartridge to clear the message and continue...

32.yy Replace Unsupported  Cartridge
Replace the unsupported toner cartridge with a supported one.
34 Short paper
The paper in the selected tray is too short for the current print job.
Try one or more of the following:
Load the appropriate paper in the tray.
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Check tray length and width guides and make sure the paper is properly loaded in the tray.
For Windows users, check the Print Properties...

Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Cancel the current print job.
Install additional printer memory.
51 Defective flash detected
Try one or more of the following:
Replace the defective flash memory card.
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
52 Not...

Try one or more of the following:
Press  to clear the message and continue printing.
Turn the power off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
The printer discards any data received through the USB port. Press  to clear the message and continue printing.
Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options installed
Try one or more of the...