Lexmark C 950 Service Manual

Repair information 4-397
  5058-030
Go Back Previous
Next
Booklet maker setup & adjustment
Folding precision skew adjustment
StepCheckYesNo
1Print a 2 sheet booklet using the booklet maker.
Does the booklet appear skewed as shown in the graphic 
below?
Go to step 2.The folding 
precision skew 
adjustment is in 
spec.
2Check the booklet maker precision skew adjuster.
1. Open the finisher front door
2. Pull the booklet maker out of the finisher.
3. Loosen the screw securing the end guide skew lever.
4....

4-398  Service Manual 5058-030  
Go Back Previous
Next
2 sheet fold & staple position fine adjustment
StepCheckYesNo
1Print a 2 sheet booklet using the booklet maker.
Does the booklet sheet edges appear overlapped as shown 
in the graphic below?
Go to step 2.The 2 sheet fold 
position fine 
adjustment is in 
spec.
Go to step 3. 

Repair information 4-399
  5058-030
Go Back Previous
Next
2Adjust the 2 sheet position fine adjustment value based on 
the graphic below: 
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet 2 sheet.
5. Make required fold position value adjustments 
according to the media size as shown in the graphic 
below. 1 step = .1 mm shift. Target amount to be 
adjusted is half the amount of the total Fold 
Misalignment.
6. Touch Submit.
Print a 2 page booklet using...

4-400  Service Manual 5058-030  
Go Back Previous
Next
3Print a 2 sheet stapled booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset 
from the fold as shown in the graphic below?
Go to step 4.The 2 sheet staple 
position fine 
adjustment is in 
spec.
Step Check Yes No 

Repair information 4-401
  5058-030
Go Back Previous
Next
4Adjust the 2 sheet staple position fine adjustment value as 
shown in the graphic below:
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet 2 sheet.
5. Make required staple position adjustments according to 
media size.  1 step =.1 mm shift.
6. Touch Submit.
Print a 2 page booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset 
from the fold as shown in the...

4-402  Service Manual 5058-030  
Go Back Previous
Next
15 sheet staple position fine adjustment
StepCheckYesNo
1Print a 15 sheet stapled booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset 
from the fold as shown in the graphic below?
Go to step 2.The 15 sheet 
staple position fine 
adjustment is in 
spec. 

Repair information 4-403
  5058-030
Go Back Previous
Next
2Adjust the 15 sheet staple position fine adjustment value as 
shown in the graphic below:
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet 15 sheet.
5. Make required staple position adjustments according to 
media size.  1 step = .1 mm shift.
6. Touch Submit.
Print a 15 page booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset 
from the fold as shown in...

4-404  Service Manual 5058-030  
Go Back Previous
Next
Booklet fold position fine adjustment (3-15 sheets) 
StepCheckYesNo
1Note: The booklet fold position fine adjustment is different 
depending on the amount of sheets that compose the 
booklet and the size of the media.
Volume 1 = 3 sheets
Volume 2 = 4 sheets
Volume 3 = 5-7 sheets
Volume 4 = 8-15 sheets
S = media < B4
L = B4 media or >
Print the appropriate booklet using the booklet maker.
Do the booklet sheet edges appear overlapped as shown in 
the...

Repair information 4-405
  5058-030
Go Back Previous
Next
2Adjust the fold position fine adjustment value based on the 
graphic below: 
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet fold pos fine adj.
5. Make required adjustments according to media size.  1 step = .1 mm shift. Target amount to be adjusted is 
half the amount of the total Fold Misalignment
6. Touch Submit.
Enter the user mode and print the appropriate booklet using 
the booklet...

4-406  Service Manual 5058-030  
Go Back Previous
Next
Booklet staple position fine adjustment (3-14 sheets)
StepCheckYesNo
1Note: The booklet staple position fine adjustment is 
different depending on the amount of sheets that compose 
the booklet.
Volume 1 = 3 sheets
Volume 2 = 4 sheets
Volume 3 = 5-7 sheets
Volume 4 = 8-14 sheets
Print the appropriate booklet using the booklet maker.
Does the staple position fine adjustment appear to be offset 
from the fold as shown in the graphic below?
Go to step...