Lexmark C 950 Service Manual
Here you can view all the pages of manual Lexmark C 950 Service Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 341
Diagnostic aids 3-39 5058-030 Go Back Previous Next Paper jam in the top cover 1.Gently move the tray to the left until it stops. 2.Open the top cover. 12 2
Page 342
3-40 Service Manual 5058-030 Go Back Previous Next 3.Firmly grasp the jammed paper on each side, and then gently pull it out. 4.Close the top cover. 5.Gently put the tray back into position. 6.If necessary, touch Continue, jam cleared from the printer control panel.
Page 343
Diagnostic aids 3-41 5058-030 Go Back Previous Next 250 paper jam 1.Remove any jammed pages from the multipurpose feeder. 2.Load paper into the multipurpose feeder. 3.If necessary, touch Continue, jam cleared from the printer control panel. 281 paper jam Paper jam in door A 1.Open door A. 2.Determine where the jam is located, and then remove it: 2.1If the paper is visible under the fuser, then firmly grasp it on each side, and pull it out. Note: Make sure all paper fragments are removed. 2.2If the...
Page 344
3-42 Service Manual 5058-030 Go Back Previous Next Warning: Do not touch the center of the fuser unit. Doing so will damage the fuser. a.Remove the thumbscrew from each side of the fuser unit by rotating each one counterclockwise. b.Lift the handles on each side of the fuser, and then pull to remove the fuser unit. 2.3Firmly grasp the jammed paper on each side, and then gently pull it down and out. Notes: •Make sure all paper fragments are removed. •If the paper is in the fuser, then lower the...
Page 345
Diagnostic aids 3-43 5058-030 Go Back Previous Next Paper jam in cover F (paper transport) 1.Open cover F. 2.Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Note: If the paper jam is difficult to remove, then rotate the knob counterclockwise. 3.Close cover F. 4.If necessary, touch Continue from the printer control panel.
Page 346
3-44 Service Manual 5058-030 Go Back Previous Next 4yy.xx paper jams Paper jam in door H 1.Open door H. Note: Door H is located between the finisher exit bins. 2.Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3.Close door H. 4.If necessary, touch Continue from the printer control panel.
Page 347
Diagnostic aids 3-45 5058-030 Go Back Previous Next Paper jam in door G 1.Open door G. 2.Lift cover G1 lever. 3.Firmly grasp any jammed paper, and then gently pull it out. Note: Make sure to remove all paper fragments after gently pulling out any jammed paper inside door G. 4.Move cover G2 to the right, and then remove any jammed paper. Note: If the paper is jammed in the rollers, then rotate knob G3 counterclockwise. AreaCover, knob, or handle name 1Cover G1 2Cover G2 3Knob G3 4Cover G4 5Cover G7...
Page 348
3-46 Service Manual 5058-030 Go Back Previous Next 5.Move cover G4 down, and then remove any jammed paper. 6.Move cover G7 to the left, and then remove any jammed paper. 7.Pull handle G9 until the tray is completely open. 8.Lift the inside cover. If the paper is jammed in the rollers, then rotate knob G8 counterclockwise, and then remove the jammed paper. 9.Close door G. 10.If necessary, touch Continue from the printer control panel.
Page 349
Diagnostic aids 3-47 5058-030 Go Back Previous Next Paper jam in cover F (paper transport) 1.Open cover F. 2.Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Note: If the paper jam is difficult to remove, then rotate the know counterclockwise. 3.Close cover F. 4.If necessary, touch Continue from the printer control panel.
Page 350
3-48 Service Manual 5058-030 Go Back Previous Next 455 staple jam 1.Open door G. 2.Press the latch to open the stapler door. Note: The stapler door is located behind the finisher. 3.Lower the latch of the staple cartridge holder, and then pull the staple cartridge holder out of the printer.