Lexicon Rv5 User Manual
Have a look at the manual Lexicon Rv5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 2 Lexicon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
RV-5Basic Operation 2-11 REMOTE CONTROL BUTTONS 1. Touch Screen (component and function buttons) 2. MAIN remote control touch screen menu 3. OFF 4. VOLUME (+/-) 5. MUTE 6. MENU 7. SELECT & Navigation (left, right, up, & down) 8. Number Keypad & Enter 9. LIGHT (back light for the remote control) 10. ON 11. CHANNEL 12. Previous Channel 13. GUIDE & INFO 14. EXIT 15. Transport functions (PLAY , STOP , RW , PAUSE ||, & FF ) for source components Note: These are the names and functions for the universal remote control. For the RV-5 specific remote control functions, refer to the Command Matrix on the following page. Note: The number call-outs on the figure above correlate with the numbers listed to the right. 1 9 2 310 411 512 6 7 13 14 8 15
Basic OperationLexicon 2-12 MENU OPTIONS Selecting a menu option can open another menu within the menu structure. For example, selecting SETUP from the MAIN MENU opens the SETUP menu. MENU ITEM SELECTION Use the remote control arrows to navigate the menu structure. To select a menu item in an open menu: 1. Press the Menu or Select buttons to enter the Menu structure. 2. Navigate to the desired menu. 3. Press the remote control and arrows to highlight the desired menu item. 4. When the desired menu item is highlighted, press the arrow or SELECT button to select the highlighted item. If an option is selected, another menu opens. When an adjustable parameter is selected, the current selection will blink to indicate that it is selected. Use the and arrows to scroll through the available options for the selected parameter. When the desired parameter option is highlighted, press the arrow on the remote control to select the option. REMOTE CONTROL LIGHT BUTTON The remote control is fully back lit, making it very useful in low-light conditions. Press the LIGHT button on the right side of the remote to back light all of the buttons and the LCD touch screen. To turn off the back light, press the LIGHT button again or wait. Ten seconds after the last button is pressed, the back light will automatically shut off. COMMAND MATRIX The command matrix table, starting on the next page, lists the commands that each remote control button performs in each menu setting. Note: A brief description of each function is given in the table but refer to the Table of Contents for additional information on each function. For additional information on using and programming the remote control, refer to Appendix C. MAIN MENU AUDIO CONTROLS VIDEO STATUS DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS SETUPSETUP
RV-5Basic Operation 2-13 *The Menu Name is not a functional command. It is simply a label identifying which menu or sub-menu the touch screen currently displays. MAINLEX PAGE1LEX PAGE2LEX PAGE3LEX PAGE4 1Menu Name - MAIN*Menu Name - LEX Menu Name - LEX Menu Name - LEX (iPod controls)Menu Name - LEX (PC controls) 2LEX Enters the Lexicon Lexicon RV-5 menu layerL7 Selects the Logic 7 listening mode familyEQ Toggles the Auto EQ parameter between ON & OFF.IPOD- iPod PC- PC 3ZONE2 Enters the Lexicon RV-5 Zone 2 menu layerSTER Selects the Stereo listening mode familyPRE1 Sets the RV-5 to the Autocal Preset 1 saved valuesIPOD+ iPod PC+ PC 4TUNER Enters the Lexicon RV-5 Tuner menu layerDOLBY Selects the Dolby listening mode familyPRE2 Sets the RV-5 to the Autocal Preset 2 saved valuesCLIK iPod wheel click, counterclockwise PCII PC Play/Pause 5TV (Does not affect the RV-5)DTS Selects the DTS listening mode familyPRE3 Sets the RV-5 to the Autocal Preset 3 saved valuesCLIK iPod wheel click, clockwise (unused) 6HD (Does not affect the RV-5)DSP Selects the DSP listening mode familyTREB- Lowers the Treble parameterMENU iPod MENU button(unused) 7DVD Enters the Lexicon RT-10/RT-20 menuAUDIN Selects either Digital or Analog Audio.TREB+ Raises the Treble parameterSEL iPod SELECT button(unused) 8GAME (Does not affect the RV-5)TONE To g g l e s t h e To n e Control parameter between ON & OFF.BASS- Lowers the Bass parameterII iPod Play/Pause button(unused) 9FAV (Does not affect the RV-5)ZOOM (unused)BASS+ Raises the Bass parameter(unused) 10MENU PAGE - OF To u c h or to scrolll between the menu pages 1 2 4 6 8 10 3 5 7 9 Note: The number call-outs on the figure above correlate with the numbers in the adjoining table.
Basic OperationLexicon 2-14 *The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or “ZONE 2” in order to control the RV-5 Receiver.Note: The number call-outs on the figure above correlate with the numbers in the adjoining table. 11 12 14 16 18 13 15 17 19 MAIN*LEX PA G E 1 - 4TUNER PA G E 1 - 3ZONE 2 PA G E 1- 3 11MAIN* Returns to the Main layer of the remote control 12OFF Puts the RV-5 Receiver into Standby 13ON Turns on the RV-5 Receiver from Standby 14MUTE Mutes the Main Zone Volume Mutes the Zone 2 Vo lu m e 15PREV CH (unused) 16VOL or VOL Main Zone VOL or VOL Zone 2 VOL or VOL 17CH or CH Main Zone MODE or MODE (unused) 18GUIDE Steps through the VIDEO STATUS menu 19INFO Steps through the AUDIO STATUS menu
RV-5Basic Operation 2-15 *The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or “ZONE 2” in order to control the RV-5 Receiver.Note: The number call-outs on the figure above correlate with the numbers in the adjoining table. 20 22 24 26 21 23 25 27 28 MAIN*LEX PA G E 1 - 4TUNER PA G E 1 - 3ZONE 2 PA G E 1- 3 20MENU Enters OSD menu 21EXIT Exits OSD menu 22 REWIND(unused) 23SELECT Enters OSD menu, While in OSD menu, selects menu items 24 ArrowsUsed for OSD menu navigation If not in the OSD menu structure, no function. 25 FAST FORWARD(unused) 26 STOPMain Zone OFF Zone 2 OFF 27|| PA U S EChanges Front panel display illumination (unused) 28 PLAY(unused)
Basic OperationLexicon 2-16 *The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or “ZONE 2” in order to control the RV-5 Receiver. Note: The number call-outs on the figure above correlate with the numbers in the adjoining table. 39 38 35 33 32 29 40 36 37 34 31 30 MAIN*LEX PA G E 1 - 4TUNER PA G E 1 - 3ZONE 2 PA G E 1- 3 291Main Zone HD inputZone 2 HD input 302Main Zone DVD inputZone 2 DVD input 313Main Zone Game input Zone 2 Game input 324Main Zone Sat inputZone 2 Sat input 335Main Zone Cable inputZone 2 Cable input 346Main Zone DVR inputZone 2 DVR input 357Main Zone CD inputZone 2 CD input 368Main Zone Dock inputZone 2 Dock input 379Main Zone PC inputZone 2 PC input 38+10 Main Zone Tu n e r i n p u tZone 2 Tu n e r i n p u t 390Main Zone Aux 1 inputZone 2 Aux 1 input 40ENT EnterMain Zone Aux 2 inputZone 2 Aux 2 input
3 Setup Setup ......................................................................................... 3-2 Display Setup ............................................................................. 3-3 Speaker/EQ Setup ...................................................................... 3-5 Rear Amp .................................................................................................. 3-6 Manual ..................................................................................................... 3-6 Semi Autocal ............................................................................................. 3-6 Full Autocal ............................................................................................... 3-7 Manual Speaker Setup................................................................ 3-9 Speakers Menu........................................................................................ 3-10 Speaker Distances Menu ......................................................................... 3-11 Output Levels Menu................................................................................ 3-12 Input Setup .............................................................................. 3-14 Advanced Video ...................................................................................... 3-20 Listening Modes ....................................................................... 3-23 Selecting a Listening Mode ..................................................................... 3-23 DTS + Dolby Listening Modes ................................................................. 3-23 Available Listening Modes ....................................................................... 3-24 Listening Mode Descriptions ................................................................... 3-27 5.1-channel & 7.1-channel Direct Inputs ................................................. 3-29 DTS & Dolby Status Displays ................................................................... 3-29 Surround Configuration ........................................................... 3-30 Dolby Configuration................................................................. 3-32 Mute Levels .............................................................................. 3-33 Power On Settings ................................................................... 3-33
SetupLexicon 3-2 SETUP Selecting SETUP from the MAIN MENU opens the SETUP menu. DISPLAY SETUP Opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel display, as well as other display-related parameters. See the “Display Setup” section on the following page for more information. SPEAKER/EQ SETUP Opens the SPEAKER/EQ SETUP menu, which is used to configure the Main Zone and Zone 2 audio output connectors for the desired speaker setup, set speaker cross-overs, and calibrate distances and output levels. See the “Speaker/EQ Setup” section found later in this chapter for more information. INPUT SETUP Opens the INPUT SETUP menu, which is used to change input names, assign audio and video input connectors, select preferred listening modes and configure Main Zone and Zone 2 settings. See the “Input Setup” section found later in this chapter for more information. SURROUND CONFIGURATION Opens the SURROUND CONFIG menu, which is used to customize the listening modes that are available for the currently selected input. See the “Surround Configuration” section found later in this chapter for more information. DOLBY CONFIGURATION Opens the DOLBY CONFIG menu, which is used to customize the Dolby listening modes to your personal preferences. See the“Dolby Configuration” section found later in this chapter for more information. MUTE LEVELS Opens the MUTE LEVELS menu, which is used to set the mute level controls. See the “Mute Levels” section found later in this chapter for more information. POWER ON SETTINGS Opens the POWER ON SETTINGS menu, which is used to configure the power on volume level and the Dock auto power feature. See the “Power On Settings” section found later in this chapter for more information. Note: When a source is active, changing some audio or video parameters may cause the Main Zone audio to briefly mute the incoming source. If Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute. MAIN MENU AUDIO CONTROLS VIDEO STATUS DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS SETUPSETUP SETUPDISPLAY SETUP SPEAKER/EQ SETUPSETUP INPUT SETUPSETUP SURROUND CONFIGSETUP DOLBY CONFIGSETUP MUTE LEVELSSETUP POWER ON SETTINGSSETUP
RV-5Setup 3-3 DISPLAY SETUP Selecting the SETUP menu DISPLAY SETUP option opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel display, and setup other display-related features. CONNECTIONANALOG, HDMI/DVI Selects the CONNECTION parameter, which identifies the active video output connectors on the RV-5 rear panel. The following list of conditions identify the behavior of this parameter. If ANALOG is selected, only the analog video connectors are available and will output the video signal. If HDMI/DVI is selected, both the analog and HDMI video connectors are available and will output the video signal. If the video input is set to HDMI and the CONNECTION parameter is set to ANALOG, then no video is output. If the HDMI video input is copy-protected (HDCP), no video is output on the analog output connectors. This is a requirement of HDCP and not a limitation of the RV-5 Receiver.HDMI AUDIO OUTYE S , N O Selects the HDMI AUDIO OUT parameter, which identifies if audio is sent on the HDMI output. If the HDMI AUDIO OUT parameter is set to YES, then a two-channel DOWN MIX of the source audio is sent over the HDMI connection at the maximum bit rate of the display’s audio system. This audio stream is in addition to the normal audio outputs. If the parameter is set to NO, this audio is not sent. 2-LINE OSDOFF, 3, 4, 5, 6 SECONDS Selects the 2-LINE OSD parameter from the On-Screen Display (OSD) menu. The 2-Line OSD parameter identifies the length of time that the 2-line OSD is displayed and can be set to display from three to six seconds in one-second increments. If OFF is selected, then the 2-line OSD is not displayed. Note: If OFF is selected, the menu screens are still displayed. This parameter only affects the 2-line OSD display, which is identical to the front panel 2-line display. ON-SCREEN DISPLAY 2-LINE OSD: 3s MENU TIME OUT: 30s FRONT PANEL DISPLAY BRIGHTNESS: FULL TIME OUT: NONE MAIN MENU AUDIO CONTROLS VIDEO CONTROLS DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS SETUPSETUP DISPLAY SETUP CONNECTION: HDMI/DVI HDMI AUDIO OUT: NO ON-SCREEN DISPLAY FRONT PANEL DISPLAY DISPLAY SETUPSETUPCONNECTIONDISPLAY SETUPSETUPHDMI AUDIO OUT DISPLAY SETUPSETUPON-SCREEN DISPLAY2-LINE OSD
SetupLexicon 3-4 MENU TIME OUT NONE, 30, 40, 50, 60 SECONDS Selects the MENU TIME OUT parameter from the On-Screen Display (OSD) menu. This parameter identifies the length of time before the OSD menu times out and can be set from 30 to 60 seconds in ten-second increments. If NONE is selected, then the OSD will not turn off automatically. CAUTION! The NONE selection should only be used with caution. If the system includes a plasma display, or other display types sensitive to image burn-in, and the OSD Menu Time Out parameter is set to NONE, the OSD menu image can be burned into the monitor display. BRIGHTNESSFULL, HALF, OFF Selects the BRIGHTNESS parameter from the Front Panel Display menu, which selects the brightness of the 2-line front panel display. The parameter can be set to FULL, HALF, or OFF. If set to OFF, then the front panel display is off. On the remote control, this parameter is controlled by the || (Pause) button while in the touch screen LEX or TUNER menus. Note: When the RV-5 is powered off or put into Standby mode, any changes to the BRIGHTNESS parameter are not saved. So when the RV-5 is powered on or taken out of Standby mode again, the BRIGHTNESS parameter will be set to FULL. TIME OUTNONE, 1 TO 10 SECONDS Selects the TIME OUT parameter from the Front Panel Display menu. This parameter identifies the length of time before the front panel 2-line display times out. The parameter can be set from 1 to 10 seconds in one-second increments. If NONE is selected, then the 2-line front panel display is always on when the RV-5 is on. DISPLAY SETUPSETUPON-SCREEN DISPLAYMENU TIME OUT DISPLAY SETUPSETUPFRONT PANEL DISPLAYBRIGHTNESS DISPLAY SETUPSETUPFRONT PANEL DISPLAYTIME OUT