Lenovo Thinkvision L1951p Users Guide

 
 
 
 
 
 
1-6  L1951p Wide Flat Panel Monitor User’s Guide 

 
 
 
 
 
 
 
Plug the monitor power cord and the computer  cord into grounded electrical outlets. 
Note : A certified power supply cord has to be  used with this equipment. The relevant 
national installation and/or equipment regulations shall be considered. A certified 
power supply cord not lighter than ordi nary polyvinyl chloride flexible cord 
according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 
0.75mm²) shall be...

 

 
 
 
1-
7   L 1951p Wide Flat Panel Monitor User’s Guide 
 
 
 
 
 
Thank you for purchasing this Lenovo  product. Please take a few moments to 
®
 
driver , and follow the on-screen instructions. 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
7. To install the monitor driver, insert the Reference and Driver CD, click  Install 
8.  To optimize your monitor image, if using the analog cable, press the Automatic 
 

#HAPTER  !DJUSTING AND USING YOUR MONITOR
‘’œ   ’••  ¢˜ž  ˜—    ¢˜ž› 
ï

X,
WŽ—˜Ÿ˜
X
V
V9.
Comfort and accessibility 
Good ergonomic practice is important to get the most from your personal 
computer and to avoid discomfort. Arra nge your workplace and the equipment 
you use to suit your individual needs and  the kind of work that you perform. In 
addition, use healthy work habits to  maximize your performance and comfort 
while using your computer. 
 
For more detailed information on any of...

2-2L1951p Wide Flat Panel Monitor User’s Guide
 
●   Use adequate lighting for the type of work you are performing. 
●   Use the monitor brightness, contrast, and image adjustment controls, if 
equipped, to optimize the image on your sc reen to meet your visual preferences. 
●   Keep your monitor screen clean so yo u can focus on the screen’s contents. 
 
Any concentrated and sustained visual activi ty can be tiring for your eyes. Be sure 
to periodically look away  from your monitor screen an d focus...

Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Note:The direct access controls are blue.
Table 2-1. Direct access controls
Icon Control Description
Image Setup Activates automatic image adjustment.
BrightnessDirect access to Brightness adjustment.
Using the On-Screen Display (OSD) controls
The settings adjustable with...

2-4L1951p Wide Flat Panel Monitor User’s Guide
 
 
Table 2-2. OSD functions 
OSD Icon on Main Menu  Submenu Descirption 
Controls and 
Adjustments  
(Analog)  Controls and 
Adjustments  (Digital) 
 Brightness  Adjusts overall brightness  
   
 
 
 
 
 
 
Brightness/  Contrast 
 
  Contrast  Adjusts difference between 
light and dark areas  
 
 
 
Same as Analog 
 Horizontal Position 
  Moves the image left or 
right.  
 
 
  
 
Image Position 
 Vertical Position  Moves the image up or   
down...

Chapter2.Adjusting and usingyourmonitor2-5
 
Table 2-2. OSD functions 
OSD Icon on Main 
Menu  Submenu Descirption 
Controls and 
Adjustments  
(Analog)  Controls and 
Adjustments  (Digital) 
 
 Same as Analog 
 
Information  Shows resolution, refresh rate, and product details. 
Note: This screen does not allow any changes to the 
settings. 
 
Menu Language  This section lists the lang
uages supported by your 
monitor.  
Note: The language chosen only affects the 
language of the OSD. It has no effect...

The display modes shown below have been optimized at the factory.
Understanding power management
Power management is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period. There are several states
as described in the table below.
For optimal performance, switch off your monitor at the end of each working day,
or whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
2-6
Table 2-3. Factory set display...

Chapter 2. Adjusting and using your monitor2-7
  
Caring for your monitor 
Be sure to turn off the power before you perform any maintenance on the monitor.   
Do not:   
●    Apply water or liquid directly to your monitor. 
●    Use solvents or abrasives. 
●    Use flammable cleaning materials to clean your monitor or any other electrical   
equipment.  
●    Touch the screen area of your  monitor with sharp or abrasive items. This type of   
contact may cause permanent damage to your screen. 
 
●...

                
                 
 
Ž—˜Ÿ˜
X
V
V9.
 
18.95
1
06
44 900
 432 104
Video input (Analog) Horizontal addressability
Vertical addressability
Clock frequency Analog Direct Drive, 75 ohm 0.7 V
1440 pixels (max)                             
           
   
1440 pixels (max)                                        
   
900 lines (max)
900 lines (max)
 137MHz
 137MHz
Video input (Digital)
Input Signal
Horizontal addressability
Vertical addressability
Clock frequency DVI
VESA TMDS (Panel Link™)...