Lenovo N22 User Manual

							
Chapter 1. Getting to know your computer
7

Usin
g memory cards (not supplied) 
Your computer supports the fo llowing types of memory cards:
Secure Digital (SD) card
•Insert  only one card in the slot at a time.•This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card  out of the memory card slot.
Note:Before removing the memory card, disable it by using the Windows safely remove 
hardware and eject media utility to avoid data corruption.
Notes: 
						

							
Chapter 1. Getting to know your computer
8
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - 
abc
aCombo audio 
jackConnects to headsets.
•The combo audio jack does not support conventional microphones.•The recording function may not be supported if third-party headphones or headsets are 
connected, due to differ ent industry standards.
bUSB portConnects to USB devices.
Note: For details, see  “Connecting USB devices”  on page  9 .
cKensington slotAttach a security lock (not supplied) here to help protect 
your computer from theft and unauthorized use.
You can attach a security lock to your computer to help 
preve

nt it from being remove d without your permission.
For details on installing the security lock, please refer to the 
i

nstructions shipped with the security lock that you have 
purchased.
Notes: 
						

							Chapter 1. Getting to know your computer
9

Conne cting USB devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Note:Typically, Windows detects a new device after  it has been connected, and then installs 
the driver automatically. However, some devices may require you to install the driver 
before connecting. Check the documentation  provided by the device’s manufacturer 
before connecting the device.
Before disconnecting a USB storage de vice, make sure your computer has 
finished transferring data  to that device. Click the Safely Remove Hardware 
and Eject Media  icon in the Windows notification area to remove the device 
before disconnecting. 
Note: If your USB device uses a  power cord, connect the device to a power source before 
connecting it. Otherwise, the device may not be recognized. 
						

							
Chapter 1. Getting to know your computer
10
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - 
a
aSpeakersProvide audio output. 
						

							
11
Chapter 2. Starting to use Windows 10
Configuring the operati ng system for the 
first time   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operatin g system when it is first used. The 
configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection
 Registering the operating system
 Creating a user account
Operating system interfaces  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
The return of the Start menu
Windows 10 comes with a powerful and us eful start menu. To open the start 
menu, do one of the following:
 Select the Start button in the lower-le ft corner
 , the Start menu is displayed.
 Press the Windows key on the keyboard. 
						

							
Chapter 2. Starting to use Windows 10
12
The power button is on the Start menu, click it you can choose to shut down 
or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate all the installed apps or view the 
frequently used apps. 
						

							Chapter 2. Starting to use Windows 10
13
The ACTION CENTER
Select the ACTION CENTER icon  on the taskbar and the ACTION 
CENTER is displayed.
From the ACTION CENTER, you can ex amine important notifications from 
Windows and your apps. Moreover, you can change common settings 
quickly.
Task View in taskbar
In Windows 10, you can add a new desktop and switch between different 
desktops.
To add a new desktop, do the following:
 Click the Task View icon 
 in the taskbar area. 
						

							Chapter 2. Starting to use Windows 10
14
New desktop .
To switch between desktops, click the Task View icon , then select your 
desir
ed desktop. 
						

							
Chapter 2. Starting to use Windows 10
15
Putting the computer to sleep or shutting 
it down   - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
When you have finished working with your computer, you can put it to sleep 
or shut it down.
Putting your computer to sleep
If you will be away from your comp uter for only a short time, put the 
computer to sleep.
When the computer is in sleep mode, yo u 
 can quickly wake it to resume use, 
bypassing the startup process.
To put the computer to sleep, do one of the following:
 Close the display lid.
 Press the power button.
 Move the cursor to the lower-left corner, and then select the Start button. 
Sel
 ect Power  
   Sleep .
Note: Put your computer to sleep before you move it. Moving your computer while the hard 
disk drive is spinning can damage th e hard disk, causing loss of data.
To wake the computer, do one of the following:
 Press any key on the keyboard.
 Press the power button. 
						

							Chapter 2. Starting to use Windows 10
16 Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
 Move the cursor to the lower-left corn er, 
 and then select the Start button. 
Select  Power  
   Shut down.
 Right-click the Start button in the lower-left corner and select  Shut down or 
sign out    Shut down.