Lenovo L194 Users Guide

							
L194

 
						

							
i
 
						

							
#ONTENTS
3AFETY INFORMATIONV
#HAPTER  ETTING STARTED 

 

						

							
3AFETY INFORMATION
       
     •Ž’Š Šœ   
0REDINSTALAC
						

							
 not t
7
Digital Interface Cable
 
						

							
Note:To attach a VESA mount, please see “Detaching the monitor stand” on page
2-7.
Product overview
This section will provide information on adjusting monitor positions, setting user
controls, and using the cable lock slot.
Types of adjustments
Please see the illustration below for an example of the tilt range.
User controls
Your monitor has controls on the front which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor
image” on page 2-3.
1-2 Flat Panel Monitor User ’s GuideL194 WideL194 Wide Flat Panel Monitor User’s Guide
 
						

							
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your
monitor (in the lower right corner). Please see the instructions that came with the
cable lock to learn how to attach it.
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note:Be sure to read the Safety Information located in the Monitor Safety,
Troubleshooting, and Warranty Guide before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer
power cord.
Chapter 1. Getting started1-3
2.Connect the analog signal cable to the video port on the back of the computer.
Note: One end of the signal cable is already pre-attached to your monitor.
 
						

							
3.Inser
tthe powercord intothemonitor,then plugthemonitorpowercord and
th
e computercord intogrounded electricaloutlets.
4.
Powe
ronthemonitorand thecomputer.
1-4FlatPanelMonitor User’s GuideL194 Wide
5.
Connectthe digital cable  to the DVI conne ctorof the monitor and the other  end 
on the back of the comp uter.
N
No
ot
te
e:
: The digital cable is in cluded with the monitor.
 
						

							
To install the monitor driver, insert the Reference and Driver CD, clickInstall
driver, and follow the on-screen instructions.
To optimize your monitor image, press the Automatic Image Setup key.
 Automatic image setup requires that the monitor is warmed up for at least 15
minutes. This is not required for normal operation.
Note: If automatic image setup does not establish the image that you prefer,
perform manual image setup. See “Manual image setup” on page 3-3.
Registering your option
Thank you for purchasing this Lenovo™product. Please take a few moments to
register your product and provide us with information that will help Lenovo to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the following Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive further
information.
Chapter 1. Getting started1-5
6.

 
						

							
#HAPTER  !DJUSTING AND USING YOUR MONITOR
‘’œ   ’••  ¢˜ž  ˜—    ¢˜ž› 
ï
#OMFORT AND ACCESSIBILITY
   ’œ  ˜  ‘Ž   ¢˜ž› ™Ž›œ˜—Š•
      ¢˜ž›  ˜›”™•ŠŒŽ   Žšž’™–Ž—