Lenovo Ideapad 700 15isk 700 17isk User Guide

Chapter 2. Starting to use Windows 10
17

Shutti
ng down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
 Move the cursor to the lower-left corner, and then select the Start button. 
Sel
 ect Power  
   Shut down.
 Right-click the Start button in the lower-left corner and select  Shut down or 
sign out    Shut down . 

Chapter 2. Starting to use Windows 10
18
Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do one of the following:
 Click the ACTION CENTER icon 
 in the notification area, and then 
deselect  Ai
rplane mode .
 Press 
 to disable airplane mode.
 Set
tings     Network & Internet    Airplane mode  to open the 
network configuration page. Then toggle the airplane mode switch to  Of
 f....

Chapter 2. Starting to use Windows 10
19
Get help from Windows  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
If you have a problem with the operating system, see the Windows Get 
Started app. To open it, do the following:
 Move the cursor to the lower-left corner, and then select the Start button. 
Select Get Started from All apps. 

20
Chapter 3. Lenovo OneKey Recovery system
The Lenovo OneKey Recovery system is software designed to back up and 
restore your computer. You can use it to restore the system partition to its 
original status in case of a system failure. You can also create user backups 
for easy restoration as required.
• If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery 
system is not available.
•To utilize the features of the OneKey Recovery  system, your hard disk already includes a...

Chapter 3. Lenovo OneKey Recovery system
21

Restor
ing
You can choose to restore the system partition to its original status or to a 
previously created back-up point. To restore the system partition:
1In 
Windows, press the Novo button or double-click OneKey Recovery 
icon to start the Lenovo OneKey Recovery system.
2 Click  System Recovery . 
 The computer will restart to the recovery 
environment.
3 Fol
low the on-screen instructions to restore the system partition to its 
original status or to a...

22
Chapter 4. Troubleshooting
Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your 
computer contains safety precautions for using your computer. Read and 
follow all the precautions when using your...

Chapter 4. Troubleshooting
23
Lenovo OneKey Recovery system
Where are the recovery discs?
Your computer did not come with recovery discs. Use the Lenovo OneKey 
Recovery system if you need to restore the system to its factory status.
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the 
following steps:
1Close all open programs, and then restart the back-up process.
2Check to see if the destination media is damaged. Select another path...

Chapter 4. Troubleshooting
24
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” of Lenovo Safety and General 
Information Guide. 

Chapter 4. Troubleshooting
25
Troubleshooting  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - 
Display problems
When I turn on the 
computer, nothing appears 
on the screen. •
If the scr een is blank, make sure that:
- The AC power adapter  is 
 connected to the 
computer, and the power cord is plugged into a 
working electrical outlet.
- The computer power is on . Pr
 ess the Power...

The computer does not 
return from sleep mode and 
the computer does not 
work. •
If your compu ter is in sleep mode, connect the AC 
power adapter to the computer, then press the 
Windows button or the Power button.
• If the 
system still does not return from sleep mode, 
your system has stopped responding, and you cannot 
turn off the computer; reset the computer. Unsaved 
data may be lost. To reset the computer, press and 
hold the Power button for eight seconds or more. If 
the computer still does...