Lenovo Ideapad 510 15isk 510 15ikb User Guide

Chapter 1. Getting to know your computer
7

Connecting network cables
To insert a network cable, do the following:
1Hold one connector of the network cable to press the RJ-45 cover down gently .
2Insert the connector into the RJ-45 port .
Software configuration
Consult your Internet Service Provider (ISP) fo r details on how to configure your computer. 

8
Chapter 1. Getting to know your computer
Connecting USB device
Your computer comes with three USB ports compatible with USB devices.
The first time you plug a USB device into a pa rticular USB port on your computer, Windows 
automatically installs a driver for that device . After the driver has been installed, you can 
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after it ha s been connected, and then installs the driver...

Chapter 1. Getting to know your computer
9

Usin
g memory cards (not supplied)
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 Secure Digital eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Notes:
•Insert  on ly one card in the slot at a time.
• This car d reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a...

10
Chapter 1. Getting to know your computer
Right-side view  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Power status indicator
SymbolIndicator 
statusMeaning
On (solid white) The computer is powered on.
Blinking The computer is in sleep mode.
Off The computer is powered off.
USB portsConnect to USB devices.
Note:For details, see...

Chapter 1. Getting to know your computer
11
Bottom view  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
LouversAllow air to enter the computer for cooling.
SpeakersProvide audio output. 

12
Chapter 2. Starting to use Windows 10
Configuring the operating system for the first time  
 - - - - - - - - - - - - - - - - - 
You may need to configure the operat ing system when it is first used.
The configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection
 Registering the operating system
 Creating a user account
Operating system interface   
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

Chapter 2. Starting to use Windows 10
13

Settings
Settings  lets you perform basic tasks. You can also search for more settings with the settings 
search box in the upper-right corner.
To open the settings, do the following:
 Open the start menu, and then select  Settings 
 .
 Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1Open the start menu, and then select  All apps  to  display the apps list.
2Right click the...

14
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down  
- - - - - - - - - - - - - - - - - - - - 
When you have finished working with your comput er, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the 
startu p pr

ocess.
To put the computer to sleep, do one of the...

Chapter 2. Starting to use Windows 10
15

Shutting down the computer
If you are not going to us e your computer for a long time, shut it down.
To shut down the computer, do one of the following:
 Open the start menu, and then select  Power
 
  Shu t down.


ght-click the Start  button
  in the lower-left corner and select  Shut down or sign out Shu
t down . 

16
Chapter 2. Starting to use Windows 10
Task and desktop management  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - -  - 
Task view
To open the task view, do one of the following:
 Select the Task view button 
 on

 the task bar.
 Press the Windows key 
 + 

Tab.
Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops. 
To create a new virtual desktop, do one of...