Lenovo Ideapad 500s 13isk User Guide

Chapter 1. Getting to know your computer
7 ■Using memory cards (not supplied)
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 Secure Digital eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:
Insert only one card in the slot at a time.
This card reader...

8
Chapter 1. Getting to know your computer
Right-side view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aNovo buttonWhen the computer is off, press this button to start the Lenovo OneKey 
Recovery System or the BIOS setup utility, or to enter the boot menu.
Notes:
You can use the tip of an unfolded paper clip (or similar object without a...

Chapter 1. Getting to know your computer
9 ■Connecting USB device
Your computer comes with three USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows 
automatically installs a driver for that device. After the driver has been installed, you can 
disconnect and reconnect the device without performing any additional steps.
Before disconnecting a USB storage device, make sure your computer has finished transferring 
data to that...

10
Chapter 1. Getting to know your computer
■Connecting network cables
To insert a network cable, do the following:
1Hold one connector of the network cable to press the RJ-45 cover down gently  .
2Insert the connector into the RJ-45 port  .
Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure your computer.
a
b
1
2 

Chapter 1. Getting to know your computer
11
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aLouversAllow air to enter the computer for cooling.
bSpeakersProvide audio output.
22
1 

12
Chapter 2. Starting to use Windows 10
Configuring the operating system for the first time   - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The configuration process 
may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection
 Registering the operating system
 Creating a user account
Operating system interfaces   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

Chapter 2. Starting to use Windows 10
13
Task view in taskbar
In Windows 10, you can add a new desktop and switch between different desktops.
To add a new desktop, do the following:
 Click the task view icon   in the taskbar area.
New desktop.
To switch between desktops, click the task view icon  , then select your desired desktop. 

14
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down   - - - - - - - - - - - - - - - - - - - - 
When you have finished working with your computer, you can put it to sleep or shut it down.
■Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the 
startup process.
To put the computer to sleep, do one of the following:...

Chapter 2. Starting to use Windows 10
15
 Right-click the Start button in the lower-left corner and select Shut down or sign out → Shut
down. 

16
Chapter 2. Starting to use Windows 10
Connecting to a wireless network   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do one of the following:
 Click the ACTION CENTER icon   in the notification area, and then deselect Airplane
mode.
 Press   to disable airplane mode.
Settings  → Network & Internet → Airplane mode to open the network 
configuration page. Then toggle...