Lenovo Ideapad 310 15abr User Guide

Chapter 1. Getting to know your computer
7
fUSB 3.0 portConnects to USB devices.
Note:For details, see “Connecting USB devices” on page 9.
gCombo audio 
jackConnects to headsets.
Notes:The combo audio jack does not support conventional microphones.
The recording function may not be supported if third-party headphones or headsets are 
connected, due to different industry standards.
hNovo buttonWhen the computer is off, press this button to start the 
Lenovo OneKey Recovery system or the BIOS setup...

Chapter 1. Getting to know your computer
8
„Connecting network cables
To insert a network cable, do the following:
1Hold one connector of the network cable to press the RJ-45 cover down 
gently a.
2Insert the connector into the RJ-45 port b.
„Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure 
your computer.
a
ab
a 

Chapter 1. Getting to know your computer
9
„Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Before disconnecting a USB storage device, make sure your...

Chapter 1. Getting to know your computer
10
„Using memory cards (not supplied) 
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 SD eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:Insert only one card in the slot at a time.This card reader does not...

Chapter 1. Getting to know your computer
11
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aPower status indicator 
IndicatorIndicator statusMeaning
Power status 
indicatorOn (solid white)The computer is powered on.
BlinkingThe computer is in sleep mode.
OffThe computer is powered off.
bUSB portConnects to USB devices.
Note:For details, see “Connecting USB devices” on...

Chapter 1. Getting to know your computer
12
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aVentilation slotsDissipate internal heat.
Note:Make sure that none of the ventilation slots are blocked, or else overheating of the 
computer may occur.
bBottom slot coverThe hard disk drive, memory module, and mini-PCI 
Express Card are placed underneath....

13
Chapter 2. Starting to use Windows 10
Configuring the operating system for the  
first time  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The 
configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection...

Chapter 2. Starting to use Windows 10
14
The power button is on the Start menu, select it you can choose to shut down 
or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate all the installed apps or view the 
frequently used apps.
The ACTION CENTER
Select the ACTION CENTER icon  on the taskbar and the ACTION 
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from 
Windows and your apps. Moreover, you can change common...

Chapter 2. Starting to use Windows 10
15
Task View in taskbar
In Windows 10, you can add a new desktop and switch between different 
desktops.
To add a new desktop, do the following:
 Select the Task View icon  in the taskbar area.
 Select New desktop.
To switch between desktops, select the Task View icon , then select your 
desired desktop.
Also, you can manage apps in the multi-tasking view:
1Select the Task View button to display all apps in use on the screen.
2Select to enter the apps or close the...

Chapter 2. Starting to use Windows 10
16
Putting the computer to sleep or shutting  
it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
When you have finished working with your computer, you can put it to sleep 
or shut it down.
„Putting your computer to sleep
If you will be away from your computer for only a short time, put the 
computer to...