Lenovo Ideapad 310 14ikb User Guide

Chapter 1. Getting to know your computer
7
Left-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aAC power 
adap
ter jackConnects to the AC power adapter.
bBattery/Charging 
st
atus indicator 
AC power   
adapter status Indicator status
Meaning
Disconnected
Off The computer is in sleep mode or 
t
urned off; The battery has more 
than 20% charge.
Solid amber The battery has between 5% and 
20

%...

Chapter 1. Getting to know your computer
8
fUSB 3.0 portConnects to USB devices.
Note: For details, see “Connecting USB devices”  on page 10.
gCombo audio 
j
ackConnects to headsets.
Notes:
• The combo audio jack does not support conventional microphones.
•T
he recording function may not be supported if third-party headphones or headsets are 
connected, due to different industry standards.
h Novo buttonWhen the computer is off, press this button to start the 
Lenovo OneKey Recovery system or the BIOS...

Chapter 1. Getting to know your computer
9
„
Con
necting network cables
To insert a network cable, do the following:
1Ho
ld one connector of the network cable to press the RJ-45 cover down 
gently  a.
2 In
sert the connector into the RJ-45 port  b.
„ Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure 
your computer.
a
ab
a 

Chapter 1. Getting to know your computer
10 „Con
necting USB devices
You can connect a USB device to your  computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device  int
 o a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Before disconnecting a USB storage device, make sure...

Chapter 1. Getting to know your computer
11
„
Using m
 emory cards (not supplied) 
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:
•Insert  only one card in the slot at a time.
• This card...

Chapter 1. Getting to know your computer
12
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aPower status indicator 
Indicator Indicator status Meaning
Power status 
in
 dicatorOn (solid white) The computer is powered on.
Blinking The computer is in sleep mode.
Off The computer is powered off.
bUSB portConnects to USB devices.
Note: For details, see “Connecting USB devices”  on page 10....

Chapter 1. Getting to know your computer
13
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
„ideapad 310-14IKB
a
c
ba 

Chapter 1. Getting to know your computer
14 „ide
apad 310-15IKB/ideapad 310 Touch-15IKB
a Ventilation slotsDissipate internal heat.
Note: Make sure that none of the ventilation slots are blocked, or else overheating of the 
computer may occur.
bBottom slot coverThe hard disk drive, memory module, and mini-PCI 
Express Card are placed underneath.
cSpeakersProvide audio output.
ba
a
c 

15
Chapter 2. Starting to use Windows 10
Configuring the operating system for the  
first time 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The 
configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating...

Chapter 2. Starting to use Windows 10
16
The power button is on the Start menu, select it you can choose to shut down 
or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate a
 ll the installed apps or view the 
frequently used apps.
The ACTION CENTER
Select the ACTION CENTER icon   on the taskbar and the ACTION 
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from 
W
 indows and your apps. Moreover, you can change common...