Lenovo Ideapad 300 14isk Idealped 300 15isk Ideaped 300 17isk User Guide

Chapter 2. Starting to use Windows 10
17
 Click New desktop .
To switch between desktops, click the Task View icon , then select your 
desired desktop. 

Chapter 2. Starting to use Windows 10
18
Putting the computer to sleep or shutting 
it down  - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - 
When you have finished working with yo ur computer, you can put it to sleep 
or shut it down.
 Putting your computer to sleep
If you will be away from your computer for only a short time, put the...

Chapter 2. Starting to use Windows 10
19

Shutti
ng down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
 Move the cursor to the lower-left corner, and then select the Start button. 
Sel
 ect Power  
   Shut down.
 Right-click the Start button in the lower-left corner and select  Shut down or 
sign out    Shut down . 

Chapter 2. Starting to use Windows 10
20
Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do one of the following:
 Click the ACTION CENTER icon 
 in the notification area, and then 
deselect  Ai
rplane mode .
 Press 
 to disable airplane mode.
 Set
tings     Network & Internet    Airplane mode  to open the 
network configuration page. Then toggle the airplane mode switch to  Of
 f....

Chapter 2. Starting to use Windows 10
21
Get help from Windows  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
If you have a problem with the operating system, see the Windows Get 
Started app. To open it, do the following:
 Move the cursor to the lower-left corner, and then select the Start button. 
Select  Get Started  from All apps . 

22
Chapter 3. Lenovo OneKey Recovery system
The Lenovo OneKey Recovery system is software designed to back up and 
restore your computer. You can use it to restore the system partition to its 
original status in case of a system failure. You can also create user backups 
for easy restoration as required.
• If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery 
system is not available.
•To utilize the features of the OneKey Recovery  system, your hard disk already includes a...

Chapter 3. Lenovo OneKey Recovery system
23

Restor
ing
You can choose to restore the system partition to its original status or to a 
previously created back-up point. To restore the system partition:
1In 
Windows, press the Novo button or double-click OneKey Recovery 
icon to start the Lenovo OneKey Recovery system.
2Click  System Recovery . 
 The computer will restart to the recovery 
environment.
3 Fol
low the on-screen instructions to restore the system partition to its 
original status or to a...

24
Chapter 4. Troubleshooting
Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
This section lists frequently asked questions by category.
Finding information
What safety precautions should I  follow when using my computer?
The Lenovo Safety and General Information Guide  which came with your 
computer contains safety precaution s for using your computer. Read and 
follow all the precautions when using your...

Chapter 4. Troubleshooting
25
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the 
following steps:
1Close all open programs, and th en restart the back-up process.
2Check to see if the destination medi a is damaged. Select another path 
and then try again.
When do I need to restore the  system to its factory status?
Use this feature when the operating system fails to start up. If there is 
critical data on the system partition,  back...

Chapter 4. Troubleshooting
26
Troubleshooting  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - 
Display problems
When I turn on the 
computer, nothing appears 
on the screen. •If the screen is blank, make sure that:
- The AC power adapter is connected to the c
 omputer, and the power cord is plugged into a 
working electrical outlet.
- The computer power is on. Press the Power button...